, chemical fiber, blended yarns etc. Weft selector: 8-12color single or double wefts weaving Weft density: 1.5-200wefts/cm Reed drives: bilateral drive, conjugated cam beating-up system. Loom drive: high efficiency three-phase induction motor, electromagnetic clutch and the slay electrostatic pick-finding Lubrication: central and automatic lubrication style Automatic stop device: electronic automatic stop if warp breaks or weft breaks Warp let-off: load-sensor control warp let-off system Take-up device: electronic control take-up system Control system: liquid crystal display Monitor: self-diagnosis, stop analysis report Gw. 4500kg, nw.4400kg, volume 35cbm per set
GA731 rapier loom can weave all kinds of nature fiber, rayon and synthetic filament. It is the most suitable to weave all kinds of fabrics involved the fields of furnishings, upholster, tour, civil engineering, industry, such as wool fabric, linen, silk, cotton, chemical fiber, sunscreen fabric, jute, glass fiber, flat yarn, jacquard, leno weaving, etc. Main Technical Parameters >>Reed width: 150, 190, 210, 230, 260, 280, 320, 360, 380, 460(cm) >>Speed: 150cm: 320~430 RPM 190cm: 312~430 RPM 280cm: 232~320 RPM 320cm: 224~300 RPM 380cm: 195~280 RPM >>Insertion rate: 1000m/minute ~ 1200m/minute >>Weft density: Mechanical take up: 3~68 picks/cm >>Electronic take up: 3~120 picks/cm >>Shedding device: Mechanical Dobby/ Electronic Dobby (20 shafts Max) >>Electronic Jacquard >>Let-off: Mechanical /Electronic >>Take-up: Mechanical /Electronic >>Beating: Conjugated cams with double drive on both sides >>Weft insertion: Slay driven by conjugated cam >>Weft beam: Single / Double >>Flange diameter: 800mm /1000mm (selectable >>Cloth roller: Diameter 550mm >>Power: Total consume< 4.6kw >>Control: CPU controlling system >>Weft selection: Electronic weft selector >>Function: Pick auto-finding, mark prevention. Reed Width: 190cm 210cm 4sets per 40GP with pallet Reed Width: 230cm 3sets per 40¡¯GP with pallet Reed Width: mare than 230cm 2sets per 40¡¯GP with pallet.
Rapier looms Total 47 looms picanol gtn 4 r Width 190 cms, with staubli dobby 2232 Each loom with 2 weftfeeder, 1.5 warp beams, 10 healdframes, 1, 5 fabric roller, 5000 heddles and droppers In container
Rapier loom Main specification: Reed width: 180cm, 200cm, 230cm, etc.According to the customers need. Rotation speed(r.P.M):220-240 Weft selection:4colors Number of heddle frame: 16pages Electrical control:p.L.C Power(kw):1.5-1.8 Dobby open-end device: adopting gt221 high speed dobby(engine drive) Dobby feathers: Adopts advanted maching methods and technology, guarantee the balance of the frame movement. Adopts rigid driving.Suitable for the production of weighter fabrics. High precision, low voice. Dobby parameters Composition:dobby and dobby heald reversing motion Type of shedding: double lift full open Method of mounting:in high position, left and right side Lifting units: 20(include colorselecting) Pitch:12mm Signal reading method:cycle card Lubricate:semi-auto lubricating Suitable speen for looms:280r/min Suitable reed width for looms:140cm-380cm Signal features Advanced instructure, suitable for higher loom speed. Stable driving, safety and reliable movement. Suitable for weaving more complicated patterns. Easy and rapid for changing the variety of the fabric patterns.
We manufacture and export various kinds of grippers and spare wearing parts for different kinds of textile machinery. Our grippers contents somet, vamatex, donier, picanol, gamma, muller, sulzer
Motor power:1.8KW Weight:1900-2300kg
Speed:350-420 rpm Yarn woven: short fiber nm4-200, long fiber tex1.7-380 Warp beam: ¨ª 800mm---1.5pcs Cloth roller: ¨ª 105mm£¨max ¨ª 500mm£©---2pcs Electronic take up and let off: servo motor Beating: two sides conjugate cams Electronic weft selecting, automatic wefting, lcd. Insertion rate£º1200/min Main motor: 6.5kw Selvedge device: mechanical or electronic Lubrication: concentrated pressure oil supply and grease lubrication Weight: approx 5 tons. Dimension: 4.5 m( l )¡¿2.2m (w )¡¿2.3(h)
HST series terry rapier loom is innovative design after the assimilation and absorption of imported advanced technology from Japan HIRAIWA and other international advanced machines. There are three series and six types terry looms with various specifications, it is a guarantee for meeting all kinds all kinds of the customers' demands. Robust frame structure, compact composition and series modularity in design, result in this machine being the first choice of customers. Specifications Model:RFHST30 Mian reed width:240cm,260cm Designing speed: 370rpm Economical speed: 300~330rpm Weft insertion: Camd rive, left & right rapier tape transfer, handing over in the central. Beating:Conjugated cam drive Ground warp let-off:Tension Sensor&Servo motor drive(Ground beam diameter:800mm) Pile warp let-off:Tension Sensor&Converter motor(Pile beam diameter:1000mm) Shedding:Electronic dobby/Electronic Jacquard Take-up:Electro-magnetic mechanical(Roller diameter max: 550mm) Looping:Positive cam&double broaches(Loop length:0~20mm). Display:10.4 inch big LCD screen/5.7 inch LCD touching screen. Model:RFHST40 Mian reed width:240cm,260cm Designing speed: 370rpm Economical speed: 300~330rpm Weft insertion: Camd rive, left & right rapier tape transfer, handing over in the central. Beating:Conjugated cam drive Ground warp let-off:Tension Sensor&Servo motor drive(Ground beam diameter:800mm) Pile warp let-off:Tension Sensor + Servo motor drive(Pile beam diameter:1000mm) Shedding:Electronic dobby/Electronic Jacquard Take-up:Servo control system(Roller diameter max: 550mm) Looping:Positive cam&double broaches(Loop length:0~20mm). Display:10.4 inch big LCD screen/5.7 inch LCD touching screen. Model:RFHST45 Mian reed width:240cm,260cm Designing speed: 370rpm Economical speed: 300~330rpm Weft insertion: Camd rive, left & right rapier tape transfer, handing over in the central. Beating:Conjugated cam drive Ground warp let-off:Tension Sensor&Servo motor drive(Ground beam diameter:800mm) Pile warp let-off:Tension Sensor + Servo motor drive(Pile beam diameter:1000mm) Shedding:Electronic dobby/Electronic Jacquard Take-up:Servo control system(Roller diameter max: 550mm) Looping:Servo motor control(Loop length:0~20mm). Display:10.4 inch big LCD screen/5.7 inch LCD touching screen Reed Width: 190cm 210cm 4sets per 40¡¯HQ with pallet Reed Width: 230cm 3sets per 40¡¯ HQ with pallet Reed Width: mare than 230cm 2sets per 40¡¯ HQ with pallet.
Textile machinery parts
Rapier loom parts.
Np5200l electrical doddy is low-positioned intelligent positive shedding device that applies to rapier looms. It is capable of weaving fabrics with up to 12, 800 weft picks. It has the advantage of quickly changing fabric patterns and is particularly suitable for thick and heavy fabrics. Technical parameters: Reed space1500mm~3600mm Max. Rpm550rpm (1900mm) Weft picks12800picks Pitch12mm Max. Lifting units20 pcs Heddle330mm Shedding amount55mm~190mm
This kind of loom has been developed for three times. It adopts electronic warp stop, electronic weft stop, central oiling, advanced dobby machine , electronic indicating lamp and some other superior technology. It suitable for many different kinds of fabrics. This loom is widely used in china. This loom is packed in wooden case and then in container.
Vamatex leonado , yom 2002, 190cm, 33 sets, 3 accumulators, 6 heald frames, 1 warp & cloth beam, staubli dobby 2861 dobby 20 shaft . Running in factory 4*1.6*1.5
HOWA JAPAN BRAND VELVET RAPIER LOOM MAKE: HOWA JAPAN Y.O.M: 1995 MODEL: H410-A AND H411-S WIDTH: 140CM (4 PILE, 4 GOUND, 4 SEL ) SHEDDING: AICHI DOBBY X 31 SETS SHEDDING: ISTAUBLY DOBBY X 20 SETS CONIDTION: EXCELLENT RUNNING TOTAL NUMBER OF SETS: 51 SET PHOTOS AS ATTACHED PRICES ON REQUEST If you are Interested, Inform us Thanks and Best personel regards JAFRI +821029184243
S&S SEJ168S-5376 electronic jacquard machine has high compatibility with power loom and high speed rapier loom. It is compatible with all types of design formats and platforms. The high performing solenoid of this digital jacquard machine valves with automated switching technology to eliminate excess heating and reduced power consumption. The pulling knives made of aluminium alloy with special heat treatment to be used for lifetime. This electronic jacquard loom is suitable for all kinds of weaving looms, such as rapier loom, air jet loom, water jet loom, shuttle loom, projectile loom. It could be used to weave label, tie, upholstery fabric, curtain fabric, shading fabric, sofa cloth, bedding cloth, towel, carpet, velvet, garment fabric, sari fabric, silk fabric, lining fabric etc. Hooks 5376/ Shed Opening 55-120mm/Max Speed 700 rpm/ Advantageous Features 1. The low power axial-flow fans ensure stable working condition to electronic system. Sealed fuselage, optimized filtration and ventilation system can effectively prevent flying flowers into the system. 2 Hollow type of core parts with light inertia, high speed and low torque are more suitable for making large and heavy design fabrics. 3 All main driving components of digital jacquard machine are standard parts. The transmission efficiency of chain is as high as 96%. The bearing capacity and service life of enforced self-lubricating chain of jacquard weaving loom is 5 times than that of ordinary chain. The casting wallboard has a good mechanical properly. It helps to decrease the vibration and reduce the noise. 4 The core hook components of the jacquard loom machine use sealed and low-power consumption electromagnet. It saves energy and has high efficiency. All digital jacquard looms adopt high quality harness which have extreme wear-resistance and corrosion resistance. There are two types of pulley you could choose to use in the hook component. One is pulley with bearing, another is pulley without bearing. The bearing capacity of pulley with bearing is better and it is more suitable for high-speed weaving. 5 The maintenance of the electronic jacquard weaving loom is very easy because it has the most concise shedding mechanism and the fewest parts. The maintenance cost is also much lowered.
GA798-I Electronic Jute Bag Rapier Loom This machine is suitable for weaving natural fibers(cotton. wool, linen/jute), synthetic fiber plastic wire rope and other kinds of fibers, especially good at industrial fabrics and building cloth. Technical Parameters Width 180cm~850cm Operation speed Maximum weft insertion 250 picks/min, maximum weft insertion rate 750/min Weft yarn count range Cotton 5Ne~80Ne Jute 8Nm~130Nm Man-made fiber 1200dtex~75tex Weft selectionMechanical or electronic selection Dia. Beam flange 800mm Dia. roller 600mm~ 1500mm Shedding device Upper mechanical dobby, or electronic dobby Heald frame 6~16pcs Warp stop Electronic introduction control Weft stop 6 row electrical Motor power 1.5KW~2.2KW Main motor Centralized oil
QJH910 flexible rapier loom is the most popular machine and the representative of mature technology among all the weaving looms we supply. This high speed rapier loom model has applied the latest mechatronics technology, and can achieve stable performance with low vibration and less noise. The machine can also change weaving speed to suit various weaving needs. It is one of the most economical textile looms for sale with high intelligence and high cost performance. Salient Features Accurate Control The weaving loom adopts digital loop control servo electronic let-off and take-up, to achieve the constant tension weaving. Strong Beat-up Powerful bilateral conjugate cam generates strong beating rigidity. Optimal Fabric Quality With the functions of digital control positioning stop and run, intelligent auto pick finding, auto compensation for weft breakage and warp breakage, the flexible rapier loom can improve the fabric quality. Fast Fault Control The loom can realize intelligent fault display and accurately determine the fault reason, and provide test scheme. Convenient Management The loom can automatically calculate yield and total output, and can realize group control by management network. it also has the function of changing fabric variety in the shortest time. Technical Parameters Width 190cm, 210cm, 220cm, 230cm, 260cm, 280cm, 300cm, 320cm, 340cm, 360cm Operation speed 190cm 380~420rpm 280cm 258~285rpm 320cm 226~250rpm Yarn scope 3s~80s, cotton, wool, linen, blended yarn, polyester and etc. Weft density 1.57~134 picks/cm Take up electronic take-up driven by servo motor, beam diameter 600mm (on loom) or 1200mm (off loom) Let off electronic let-off driven by servo motor, beam diameter 800mm or 1000mm Shedding Underneath type electronic dobby 12~20 frames Color selector high speed electronic weft selector controlled by stepping motor, 4~16 colors Weft insertion maximum 1080m/min Selvage electronic leno selvage device Main drive high power main motor, power rating 5.5KW Automatic functions automatic warp stop, automatic weft stop, automatic pick finding Electronic control With 32-bit CPU control system and embedded software, the rapier loom can guarantee with highest fabric quality, prompt detection of machine error and the convenient management.
QJH810 rapier loom has been a best seller since the first machine was released to the market. It is an auto loom machine that carries excellent mechanical and electronic performance. This type of weaving loom machine has a precise control of the tension from warp and weft, hence improving the fabric quality. The weaving adaptability of QJH810 is very extensive, including natural fibers like cotton, wool, linen, silk, artificial fiber and all kinds of light, medium, heavy weight blended fibers. This model is the best price loom machine for sale in our company. Salient Features High Cost Performance and Practicability The loom embodies nice appearance, reliable structure, advanced electrical control system and convenient operation; it has low energy consumption and easy maintenance. Special Design of Conjugate Cam Our technicians use computer technology to optimize the contour line of the conjugate cam to ensure a more reliable and stable acceleration movement during weft insertion process. The conjugate cam is made from composite steel to realize an excellent performance in strength and endurance. Diversified Configuration Customers have a choice to make changes on take up mechanism, let off mechanism according to their practical usage. This model can also match with SRD motor, without clutch and reduction gearbox driving device, the structure of the loom is more simple and stable. The changes of the structure will save at least 15% of electricity than the common clutch model. SRD motor is new type of high technical machine with high efficiency and stability and can be easily maintained. Technical Parameters Width 190cm(75"), 210cm(82"), 230cm(90"), 280cm(110"), 300cm(118"), 340cm(134") Operation speed 180~360rpm Yarn scope short fiber 5-500Tex (200-2Nm), filament 15-3500Td (1.7-380Tex) Weft density 3~80 picks/cm Take up mechanical or electronic take-up, maximum cloth diameter Ï?550mm on loom and Ï?1200mm off loom Let off mechanical or electronic let-off, beam diameter Ï?800mm or Ï?1000mm Shedding cam shedding (4~8 frames), mechanical dobby, electronic dobby (12~20 frames), electronic jacquard Color selector electromagnetic type, 4~8 colors Weft insertion maximum 1080m/min Selvage electronic leno selvage device Main drive 4KW; direct drive also available Automatic functions automatic warp stop, automatic weft stop, automatic pick finding Electronic control advanced 32 bit single chip microcomputer Fabric weight 20-450g/m ²
GA788 rapiloom is a kind of mini weaving loom; it is the updated model of 747 series rapilooms with many improvements. This type of shuttleless loom provides highspeed, more stable performance and longfunction life, with a wide weaving adaptability including natural fibers like cotton, polyester, wool, linen, and chemical yarns and blended yarns. It meets the requirements of the textile weaving industry with its high unit area yield, highfabric quality and widfabric adaptability; it is the most successful weaving solution for the textile industry. It is controlled by micro-computand equipped with automatic warp/weft stop devices and semi-automatic oil supply. The strengthened walls offbettmachine stability, lowvibration, lownoise and highdensity fabrics. The GA788 rapiloom machine price is on the low side so as to meet most customersâ?? needs. Salient Features Nice appearance Stable performance Strong structure and heavy machine body Thick uppgirders with inclined support Solid square steel tube central and lowgirders Low noise Long endurance Easy maintenance Continuous take-up mechanism optional Double fabric pressing rollers optional Square/round gearbox optional Tuck in device optional Cross front support Technical Parameters Width 1800mm-3600mm Operation speed 120-215rpm Weft density 10~47picks/cm Take up mechanical take-up, beam diametÏ?600mm Let off mechanical let-off, beam diametÏ?300mm or Ï?400mm Shedding GT221 inhead type mechanical dobby or electronic dobby, 20 heald frames at most Color selector 4~6 colors Selvage Left, right and central tuck in device optional Main drive 1.5kw Automatic functions automatic warp stop, automatic weft stop Electronic control micro-computcontrol, LCD display of working statistics data
Product Description RFTL60 terry rapier loom adopts electronic let-off and take-up, servomotor-looping system, has advanced electronic controlling capability, loop formation can be changed freely from 3~7 picks, and weft density can be changed automatically while the loom is running. This model loom not only can weave common terry fabric, but also can weave up and down loop, high and low loop, wave-pile patterns, single cover loop and other top grade terry towel. Direct motor is an option for this model looms with the advantages of convenient maintenance and saving power. This type loom fills the blank of top grade terry loom in China, and reaches the international advanced level. High speed, perfect performance. Dynamic loop formation controlled by sley movement can ensure weaving super quality terry towels, and form the superstandard of loop pattern. Specification: 1.Reed width: 200, 220, 240, 260, 290, 360cm Width reduction: up to 80 cm. 2.Spun yarns: 500tex (1.2Ne)~5tex (120Ne) 3.Filament yarns: 10dte(9td )~1650dte(1500Td) 4. Pratical speed: 350~450rpm 5.Weft insertion rates: up to 1350m/min 6.Colour selection: 8-colour electronic weft selector. 7.Weft feeder: FDP electronic accumulator 8.Driving control: rated three-phase 7.5kw motor, Electro-magnetic brake-cloth unit./Direct drive: fast reactive permanent super motor with low power consumption 9.Shedding motion: High-speed electronic dobby with max. 20 shafts. Reed Width: 190cm 210cm 4sets per 40¡¯GP with pallet Reed Width: 230cm 3sets per 40¡¯GP with pallet Reed Width: mare than 230cm 2sets per 40¡¯GP with pallet.
