Electronic Dobby For Rapier Loom

Np5400B electronic doddy is top-mounted intelligent positive shedding device. The lubrication oil is forced to circulate via oil pump, and oil level sensor is adopted to avoid lacking oil. Its characterized by compact structure and easy operation. Thus, it is especially suitable for fast speed and wide unbalanced fabrics. Its energy consumption is 1/3 less than mechanical dobbys. The device is particularly popular among enterprises with fast changeover of fashion fabrics, short life-cycle and advanced technologies.
Technical parameters:
Reed space1900mm~3600mm
Max. Rpm750rpm (1900mm)
Weft picks12800 picks
Pitch12mm
Max. Lifting units16 pcs
Heddle330mm
Shedding amount55mm~160mm

Np5600 electronic doddy is low-positioned intelligent positive shedding device that applies to wide and fast speed air-jet looms. Multiple cam curves are provided for weaving different fabrics. Is characterized by its compact structure, easy operation and large capacity. Its oil filter can sift the fibers within housing.
Technical parameters:
Reed space1900mm~3600mm
Max. Rpm750rpm (1900mm)
Weft picks12800 picks
Pitch12mm
Max. Lifting units16 pcs
Heddle330mm
Shedding amount55mm~160mm

NP5400A Electronic Doddy is top-mounted intelligent positive shedding device. The lubrication oil is forced to circulate via oil pump, and oil level sensor is adopted to avoid lacking oil. Itâ??s characterized by compact structure and easy operation. Thus, it is especially suitable for fast speed and wide unbalanced fabrics. Its energy consumption is 1/3 less than mechanical dobbyâ??s. The device is particularly popular among enterprises with fast changeover of fashion fabrics, short life-cycle and advanced technologies.
Technical Parameters:
Reed Space1900mm~3600mm
Max. RPM750rpm (1900mm)
Weft Picks12800 picks
Pitch12mm
Max. Lifting Units16 pcs
Heddle330mm
Shedding Amount55mm~160mm

S&S SEJ168S-5376 electronic jacquard machine has high compatibility with power loom and high speed rapier loom. It is compatible with all types of design formats and platforms. The high performing solenoid of this digital jacquard machine valves with automated switching technology to eliminate excess heating and reduced power consumption. The pulling knives made of aluminium alloy with special heat treatment to be used for lifetime. This electronic jacquard loom is suitable for all kinds of weaving looms, such as rapier loom, air jet loom, water jet loom, shuttle loom, projectile loom. It could be used to weave label, tie, upholstery fabric, curtain fabric, shading fabric, sofa cloth, bedding cloth, towel, carpet, velvet, garment fabric, sari fabric, silk fabric, lining fabric etc. Hooks 5376/ Shed Opening 55-120mm/Max Speed 700 rpm/ Advantageous Features 1. The low power axial-flow fans ensure stable working condition to electronic system. Sealed fuselage, optimized filtration and ventilation system can effectively prevent flying flowers into the system. 2 Hollow type of core parts with light inertia, high speed and low torque are more suitable for making large and heavy design fabrics. 3 All main driving components of digital jacquard machine are standard parts. The transmission efficiency of chain is as high as 96%. The bearing capacity and service life of enforced self-lubricating chain of jacquard weaving loom is 5 times than that of ordinary chain. The casting wallboard has a good mechanical properly. It helps to decrease the vibration and reduce the noise. 4 The core hook components of the jacquard loom machine use sealed and low-power consumption electromagnet. It saves energy and has high efficiency. All digital jacquard looms adopt high quality harness which have extreme wear-resistance and corrosion resistance. There are two types of pulley you could choose to use in the hook component. One is pulley with bearing, another is pulley without bearing. The bearing capacity of pulley with bearing is better and it is more suitable for high-speed weaving. 5 The maintenance of the electronic jacquard weaving loom is very easy because it has the most concise shedding mechanism and the fewest parts. The maintenance cost is also much lowered.

GA798-I Electronic Jute Bag Rapier Loom
This machine is suitable for weaving natural fibers(cotton. wool, linen/jute), synthetic fiber plastic wire rope and other kinds of fibers, especially good at industrial fabrics and building cloth.

Technical Parameters

Width 180cm~850cm
Operation speed Maximum weft insertion 250 picks/min, maximum weft insertion rate 750/min
Weft yarn count range Cotton 5Ne~80Ne
Jute 8Nm~130Nm
Man-made fiber 1200dtex~75tex
Weft selectionMechanical or electronic selection
Dia. Beam flange 800mm
Dia. roller 600mm~ 1500mm
Shedding device Upper mechanical dobby, or electronic dobby
Heald frame 6~16pcs
Warp stop Electronic introduction control
Weft stop 6 row electrical
Motor power 1.5KW~2.2KW
Main motor Centralized oil

GA731 rapier loom can weave all kinds of nature fiber, rayon and synthetic filament. It is the most suitable to weave all kinds of fabrics involved the fields of furnishings, upholster, tour, civil engineering, industry, such as wool fabric, linen, silk, cotton, chemical fiber, sunscreen fabric, jute, glass fiber, flat yarn, jacquard, leno weaving, etc.
Main Technical Parameters
>>Reed width: 150, 190, 210, 230, 260, 280, 320, 360, 380, 460(cm)
>>Speed: 150cm: 320~430 RPM
190cm: 312~430 RPM
280cm: 232~320 RPM
320cm: 224~300 RPM
380cm: 195~280 RPM
>>Insertion rate: 1000m/minute ~ 1200m/minute
>>Weft density: Mechanical take up: 3~68 picks/cm
>>Electronic take up: 3~120 picks/cm
>>Shedding device: Mechanical Dobby/ Electronic Dobby (20 shafts Max)
>>Electronic Jacquard
>>Let-off: Mechanical /Electronic
>>Take-up: Mechanical /Electronic
>>Beating: Conjugated cams with double drive on both sides
>>Weft insertion: Slay driven by conjugated cam
>>Weft beam: Single / Double
>>Flange diameter: 800mm /1000mm (selectable
>>Cloth roller: Diameter 550mm
>>Power: Total consume< 4.6kw
>>Control: CPU controlling system
>>Weft selection: Electronic weft selector
>>Function: Pick auto-finding, mark prevention.


Reed Width: 190cm 210cm 4sets per 40GP with pallet
Reed Width: 230cm 3sets per 40¡¯GP with pallet
Reed Width: mare than 230cm 2sets per 40¡¯GP with pallet.

Rapier looms

Total 47 looms picanol gtn 4 r
Width 190 cms, with staubli dobby 2232
Each loom with 2 weftfeeder, 1.5 warp beams, 10 healdframes, 1, 5 fabric roller, 5000 heddles and droppers



In container

Rapier loom

Main specification:
Reed width: 180cm, 200cm, 230cm, etc.According to the customers need.
Rotation speed(r.P.M):220-240
Weft selection:4colors
Number of heddle frame: 16pages
Electrical control:p.L.C
Power(kw):1.5-1.8
Dobby open-end device: adopting gt221 high speed dobby(engine drive)
Dobby feathers:
Adopts advanted maching methods and technology, guarantee the balance of the frame movement.
Adopts rigid driving.Suitable for the production of weighter fabrics.
High precision, low voice.
Dobby parameters
Composition:dobby and dobby heald reversing motion
Type of shedding: double lift full open
Method of mounting:in high position, left and right side
Lifting units: 20(include colorselecting)
Pitch:12mm
Signal reading method:cycle card
Lubricate:semi-auto lubricating
Suitable speen for looms:280r/min
Suitable reed width for looms:140cm-380cm
Signal features
Advanced instructure, suitable for higher loom speed.
Stable driving, safety and reliable movement.
Suitable for weaving more complicated patterns.
Easy and rapid for changing the variety of the fabric patterns.

We manufacture and export various kinds of grippers and spare wearing parts for different kinds of textile machinery.
Our grippers contents somet, vamatex, donier, picanol, gamma, muller, sulzer