Product description: QT-ML3 portable soil moisture/temperature meter can be used for the measurement of moisture of various types of soil and media, and it can be used as a basic tool for on-site observation or mobile measurement. Principle Using FDR (frequency domain reflectometry) principle, the sensor emits electromagnetic wave with a certain frequency, the waves transmit along the probe till they reach the bottom of the probe and return to the sensor, the output voltage is recorded. Because the dielectric constant of the soil usually depends on the soil moisture, the soil water content can be calculated according to the relationship between the output voltage and soil moisture. Feature GPS coordination can be recorded Record data Automatically or manually Wireless data transmission via Wi-Fi Recognize sensors by two-dimensional code Automatically recognize connected sensors Terminal memory card is up to 32G Display real-time data and curve of recorded data Export data to Excel for analysis
Product's name: Wood Charcoal Keywords: Flat cube charcoal,Flat cube burning,Lump charcoal , Lump Shisha Charcoal, Silver Charcoal. Specification as following: Specification: Grade A Material (Composition) 90% bamboo charcoal & 10% pure nature bonding Moisture Content less than 6% Fixed Carbon More than 85% Ash 4% Heat value 7000J-8000J Volatile Matter 2% Hardness 90% Temperature (Burning) 700-880°C Burning Time 4-5 hours Others feature smokeless,odourless,innocuity, no bursting it is an environment-friendly products , no any chemicals Size: hexagon shape square diameter outer diameter Æ 40mm 40x40mm inner diameter Æ 10mm Æ 10mm Length 18-25cm 18-25cm Weight (Average) 285g-295/pc 285-295g/pc
Product description: the qt-aqua soil moisture/temperature meter can be used for the measurement of soil volumetric water content based on the advanced tdr principle. The electrical signal can be directly output, and the soil volumetric water content and soil temperature can be shown directly. The meter can be widely used in agricultural production, scientific research, etc because of its low cost. Feature Gps coordination can be recorded Record data automatically or manually Wireless data transmission via wi-fi Recognize sensors by two-dimensional code Automatically recognize connected sensors Terminal memory card is up to 32g Display real-time data and curve of recorded data Export data to excel for analysis
Product description: QT-PICO can be used to rapidly measure soil moisture in the upper layer, it can also work with extension rod to measure deep soil moisture. After calibration, it can measure soil salinity at the same time. Principle QT-PICO soil moisture and temperature meter is based on TDR (Time domain Reflectometry) technology. It can directly measure the dielectric constant of soil or other media. According to the relationship between the dielectric constant and soil moisture, soil water content can be derived from the output voltage. When the meter is operating, it first produces 1GHz high frequency electromagnetic waves, then the waves transmit along the conductor and generate an electromagnetic field around the probe. When the waves reach the end of the conductor, they return to the source. The duration of transmission is between 10 ps and 2 ns. The meter is very sensitive and it can detect the time signal as short as 3 ps. The time sampling method makes soil moisture measurements become more accurate and convenient.
The high quality bulgarian rose oil gained its producers scores of medals and diplomas from many exhibitions and fairs. The rose valley in bulgaria, near the town of kazanlak, is among the major producers of attar of roses in the world. Thanks to the specific geographic and climate conditions favorable temperatures during february, when blossoming buds formed, the maroon forest soils and frequency of the rainfalls during the rose picking in may and june, more than 3 centuries had been cultivated the famous all over the world bulgarian oil rose. This rose is used for producing the incomparable bulgarian rose attar.
Castor meal is also variously called castor meal, castor residue, castor extract & de-oiled castor cake Castor meal - the residue obtained from castor cake by the solvent extraction process - is one of the most versatile natural manures. It is truly organic manure which enhances the fertility of the soil without causing any damage or decay. It is enriched with the three big elements vital and conducive to the proper growth of crops - Nitrogen, Phosphorus and Potassium. It also has traces of nutrients like Manganese, Zinc and Copper, thus making it a balanced fertilizer. Moreover, it helps to neutralize the detrimental effects of chemical fertilizers. Apart from their contribution to Nutrients, they have a number of benefits in agriculture, which none of the synthetic fertilizers or pesticides can offer. They bring in the wonderful molecules that nature has designed to help the plants flourish naturally. They provide slow and steady nourishment, stimulation, protection from soil nematodes and insects; improve yields, and quality of product like taste, flavour, amino acid composition etc. The pressed cake obtained after the expression of castor bean. The solvent extracted cake, although rich in protein cannot be used as cattle fodder because of its toxicity. However, it can be used as a fertilizer. The protein content of castor seed meal varies from 21-48% depending upon the extent of decortications. It has an ideal amino acid profile with moderately high Cystine, mithionine, and isoleucine. But its ant nutritional substances, ricin, ricine and an allergen restrict its use in poultry feed, even at a very low level of inclusion. Castor Cake is an excellent fertilizer because of high content of N (6.4%), Phosphoric Acid (2.55%) and Potash (1%) and moisture retention. There is negative correlation between the contents of ricinine in castor seeds and oil content (r = -0.76). This content of ricinine in castor seed is determined by Agro climatic conditions. Nutrient content of Castor Cake: Organic matter - 75 - 80 %, Nitrogen - 4.0 - 4.5 %, Phosphorous - 1.5 %, Potassium - 1.25 - 1.5 %. It also contains some micro nutrients viz., Calcium, Magnesium, Sulphur, Iron, Zinc, Manganese, Copper etc. A typical composition of castor residue/meal is as follows: Nitrogen - 4% min. approx. Phosphorous - 1% min. approx. Potassium - 1% min. approx. Moisture - 10 - 12 % max. approx. Oil Content - 0.7% max. approx. Advantages: 1. It provides all the major & minor nutrients necessary for better plant growth. 2. It also helps in increasing the nutrient uptake by plants. 3. It improves the soil fertility and productivity. 4. It is known to protect the plants from nematodes and termites. 5. It improves the yield & quality of the farm produce. 6. It improves the physical, chemical and biological properties of soil
The mustard plant is a plant of the Cruciferae or Cabbage family. This is an undemanding plant, which easily tolerate drought, heat and slight frosts. The plant is used as a natural fertilizer - mustard enriches the soil. The mustard seeds are used as a condiment, especially for canning the vegetables. The mustard oil is also made of the seeds. The oil concentration in the seeds reaches 30%. Powdered seeds are used for cooking the hot sauce. The mustard is also used in medicine due to its warming properties, the mustard plasters for example. In cosmetology, the mustard is used to strengthen hair, cleanse face and stimulate the blood circulation. Yellow mustard seeds have delicate and spicy taste. They are used whole or milled for preserving vegetables, mushrooms, fish, for cooking vegetable dishes, pork, various game and meat soups etc. The bulk of the seeds are used in making mustard sauce to retain the fragrance. We are arranging for direct supply from Ukraine manufacturers of yellow, white and black mustard seeds in the following package: Bags of 25-50 kg; Big-bags of 500-1600 kg (optimum of 1000-1200 kg). Containers (in this case mustard seeds are loaded in bulk). Specifications of mustard seeds Moisture - 9% max. Foreign admixture - 2% max
Ginger root Botanical name: Zingiber officinale Linn. Family: Zingiberaceae. Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant. Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice. Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position. Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed. Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils. The composition of dry ginger is given below: Dry Ginger rootMoisture:6.9 % Protein:8.6 % Fat:6.4 % Fiber:5.9 % Carbohydrates:66.5 % Ash:5.7 % Calcium:0.1 % Phosphorous:.15 % Iron:0.011 % Sodium:0.03 % Potassium:1.4 % Vitamin A:175 I.U./100 g Vitamin B1:0.05 mg/100 g Vitamin B2:0.13 mg/100 g Niacin:1.9 mg/100 g Vitamin C:12.0 mg/100 g Calorific value:380 calories/100 g. Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.
1,Name: Sodium nitrite Molecular formula: NaNO2 Formula weght:69.00 2Property: (1) ordinary sodium nitrite: white little crystals or light yellow  (2) dry powder sodium nitrate: white crystal,non-caking, showing loose status. Density:2.168. No odor, slightly salty. It is liable to deliquesce, dissolved in water,soluble in liquid ammonia,slightly soluble in ethanol and glycerin,Melting Point:271. Decomposition temperature is 320. It has oxidability and also has reducibility. It will slowly be oxidized into sodium nitrate in atmosphere, it can form nitrogen compound with nitrilo at low temperatures. 3Usage:It has been widely used in making nitro-compound and azo dye, mordant of textile dyeing, bleaching agent, metal heat finishing agent, cement early strength agent, and deicing agent etc. Note: The product should be stored in a cool, dry place to prevent it from moisture, heat and sunlight. This product can not be mixed with strong reductant, inflammable and explosive materials, food, feed and additives. â?¢ This product is toxic and should be properly kept and can not be eaten. 4 Specification: (Technical Standards:GB2367-2006) Item Unit Molten salt G High G First G Qualified G Dry powder G Assay % 99.3 99.0 98.5 98.0 98.5 Sodium nitrate % 0.6 0.80 1.00 1.90 0.80 Chlorides % 0.03 0.10 0.17 -- 0.1 Water insolubles % 0.02 0.05 0.06 0.10 0.06 Moisture % 1.0 1.4 2.0 2.5 0.2 Loose degree -- -- -- -- 95 5,Package: net 50kg net each in plasic woven inner plasic bag, or according to customers requirement.
Commodity: Calcium chloride Molecular formula CaCl2 H.S code 28272000 Product feature Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous. Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature, Specifications: Analysis Item Standard Calcium chloride (CaCl2) 74%min,77% min,94%min Total Chlorinated Alkali: (NaCl) 5.0%max Magnesium Chloride(MgCl2) 0.5%max Insoluble matter in water 0.25%max Calcium Sulfate (CaSO4): 0.2%max Ferric Oxide (Fe2O3) 0.025%max Heavy Metal as Cu., Pb., Cd., Cr., Hg., As 0.005%max Application Mainly used in drying, melting snow for airport express and street, concrete desiccant and concreting fast, removing dust and oil industry. Exporting Packing :Plastic woven bag with PE ,25kg/50kg/1000kgs net weight or 25kg x 40 bags into one big bag or 40 bags on a pallet with shrink-wrapped Means of transportation :in containers or by bulk vessel with large quantity
Commodity:Sodium persulfate Molecular Formula : Na2S2O8 Molecular weight : 238.13 Description Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle. Transportation Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505 Water hazards class 1(slight water hazard) All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed. Package (1) In 25kgs net multiple paper bags with one PE bag inner (2) In 25kgs net PE bags (3) In 25kgs net woven bags with two PE bags inner (4) In 1000kgs net big woven bags with one PE bag inner The above package is also with a pallet 1000kgs each. Storage NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect. Application Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc. Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors; cleaning and etching of printed circuits),activation of copper and aluminium surfaces. Cosmetics : Essential component of bleaching formulations. Paper : modification of starch,repulping of wet - strength paper. Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans). Others : - Chemical synthesis - Water treatment(decontamination) - Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg) - Disinfectant ITEMS SPECIFICATIONS Appearance white crystalline salt Assay 99.0% w/w min Active oxygen 6.65% w/w min Chloride and chlorate(as CL) 0.005% w/w max Ammonia (NH4) 0.05% w/w max Manganese(Mn) 0.0001% w/w max Iron(Fe) 0.001% w/w max Heavy metals(as Pb) 0.001% w/w max Moisture 0.05% w/w max Decomposition of the product as supplied at above 65C Recommended storage temperature Normal Temperature Storage stability as from date of delivery 12 months
Product description: The QT-SM01 is a soil moisture meter, consisting of a soil moisture sensor and a portable data logger. It can apply to agriculture, forestry, environmental protection, water conservancy, meteorology and other sectors for soil moisture monitoring, irrigation, greenhouse control and precision agriculture. The meter can be used to rapidly measure the moisture of various types of soils at upper and lower layer. It is able to meet the requirements of soil moisture monitoring, scientific research, production and teaching, etc. Technical parameters Moisture sensor: cylindrical PVC waterproof probe with four 6 cm long stainless steel probe, it can be also kept in the soil for a long term observation at a fixes position or and on-line measurement Extension rod for moisture sensor: length 80cm Measurement range: 0~100% Vol Accuracy: ±3% (0~60% Vol), ±1%(after calibration) Response time: < 0.3 s Storage module: software included, more than 12,000 data, no data lost when power failure Data display: LCD with backlight, shutdown automatically, power-saving mode Power supply: 8.4V rechargeable lithium battery, charger included Communication interface: RS232 Battery life: continuously for 48 hours in frequent use Standard configuration QT-SM01 soil moisture meter includes soil moisture sensor, portable data logger, USB cables, portable case, charger, software, manual and extension rod. Origin: China
Product description: QT-SM100 soil moisture meter is based on TDR (Time domain Reflectometry) technology, it can be used to rapidly measure the moisture of various types of soils. By measuring the dielectric constant of soil or other media, the meter can calculate soil water content, because soil water content is closely related to the dielectric constant. Soil moisture data can be transmitted to a handheld Android terminal by WIFI. Feature GPS coordination can be recorded Record data Automatically or manually Wireless data transmission via Wi-Fi Recognize sensors by two-dimensional code Automatically recognize connected sensors Terminal memory card is up to 32G Display real-time data and curve of recorded data Export data to Excel for analysi
Calcined Bauxite: Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application. We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices. Applications of Calcined Bauxite: Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%. Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement. Minimum Order Quantity : 1 Containers
Product description: QT-SM101 is based on TDR (Time domain Reflectometry) technology, it can be used to rapidly measure the moisture of various types of soils. By measuring the dielectric constant of soil or other media, the meter can calculate soil water content, because soil water content is closely related to the dielectric constant. Soil temperature is measured via high-precision thermistor. Soil moisture and temperature data can be transmitted to a handheld Android terminal by WIFI. Feature GPS coordination can be recorded Record data automatically or manually Wireless data transmission via Wi-Fi Recognize sensors by two-dimensional code Automatically recognize connected sensors Terminal memory card is up to 32G Display real-time data and curve of recorded data Export data to Excel for analysis
Introduction: The coco peat is extracted from the shell of the coconut consisting of the coir fiber and the coir dust. These are natural material used for many purposes from agriculture and industry. Advantages: - Help improve the fallow conditions as well as the calluses from the soil - Helps soil to retain more nutrients and retain moisture. - Helps increase soil ventilation -Furthermore, they will promote full root development and plant growth - Contains natural organic matter and is good for soil and plants - No harm to the environment.
Prevent soil washing. Combined with the coco peat and coir tape to the greening of barren hills. Create moisture for the soils. Use on high- performance decorative artwork. Origin: Vietnam Color: Natural brown Diameter: 35mm Length: 10m Wight: 1m, 1.5m Moisture: 8% max Packing: Roll, bunch Usage: Decoration, farming, agriculture Packing: 100-155 roll/cont40ft
Coir Rope 1. Diameter: 6-8mm * Length: 200m * Loading: - 200 meters 1800 rolls/ Cont 20ft - 200 meters 3600 rolls/Cont 40ft 2. Diameter: 16-18mm * Length: 100-200m * Loading: - 100 meter 900 rolls/ Cont 20ft - 200 meter: 450 rolls/Cont 20ft 3.. Diameter: 30mm * Length: 80m * Loading: - 240 rolls/Cont 20ft (+/-10%) - 480 rolls/ Cont 40ft - 600 rolls/ Cont 40 HC We also have others sizes as your requirement such as: 5mm, 10mm and so on. * Moisture: 10 - 15% max