Find Verified Optical Power Meter Suppliers, Manufacturers and Wholesalers

Product Overview

This portable optical power meter with red light source is an accurate portable instrument with long service time specially designed for the installation, operation and maintenance of fiber-optical network. It features fine appearance, controllable backlight display, automatic power off, supper wide testing range for optical power, high accuracy, self-calibration and universal interface. Whats more, the linearity index(mW) and nonlinear index (dBm) will be displayed in a same screen. The optical power meter can be used alone for saving power.



Product features

The optical power meter with red light of 10mW or 1mW features open self-calibration which could be operated by the user.

With two AA batteries, the optical power meter can work continuously for 40 hours. It can work continuously if working with a red light source of 10mW, or 42 hours with a red light source of 1mW.

the linearity index(mW) and nonlinear index (dBm) will be displayed on the same screen of the optical power meter.

Special universal interface for FC/SC/ST, easy to transformation.

Optional auto off.

Optional backlight display.

Optional steady/flashing red light.

SC APC SC UPC Dual Round Duplex 2.0mm Single Mode Fiber Optic Pigtail PVC


Pigtails are used for splice applications when terminating outside plant cable. Its consists of a connector and a special length of fiber cable. Meets Telcordia GR-326 Core and ROHS requirements. All of OMC pigtails are factory inspected and tested, with available interferometer data upon request.

OMCs pigtails are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fiber Channel. Every termination through rigorous parameter test to ensure the highest in network performance.

Optical power meter

Measuring range
Bpm100 +8 ~ -70dbm
Bpm101 +25 ~ -48dbm

Calibrated wavelengths
850nm/1300nm/1310nm/1490nm/1550nm/1625nm

Display resolving power
0.01db

Connecting adapter
Fc/pc

Reference value set
Yes

Auto power off
About 10 minutes (can be cancelled)

Battery charge
Yes

Operate time
Above 100 hours

Power supply
Aa * 2



Size
160mm * 75mm * 32mm

Weight
About 150g

Optical power meter pop-560

Pop-560 power meter is the newest-generation handheld fiber optical tester. It can offer the
Best performance for the daily maintenance for fiber network, and cwdm system, dwdm
System and fttx network. The perfect test function and test ensurence are all ideal for
Indoor or field-testing.
Features:
The most perfect testing function:
1. Three kinds of modulated signal recognitiong270hzb1khzb
2khz
2. Auto-wavelength recognition, no need for communication
Between the sources and power meter. Save test time and
Decreases the potential error.
3. 21 calibrated wavelengths offered to meet the customersªtesting
Requirement. Such as fttx 1490nm.
4. The moveable connector provides several types of connector
Included fc, sc etc.
5. Superior testing range: -70dbm p +10dbm or -50dbm p
+26dbm
Nthe most perfect power supply and power management:
1. Internal rechargeable li batterybaa battery and ac adapter.
2. Auto power-off.
3. More than 200hr battery operating.
Nthe most perfect testing guarantee:
1. Superior stability to ensure the testing performance and repeatability.
2. Wide lcd display that provides the most complete testing information: wavelength,
Modulated signal, all kinds of conditions.
3. High quality and rugged design, ideal for field testing.

Description:
SX503 Handheld Optical Power Meter is a self-developed test instrument Which is widely used for installation, operation and maintenance of fiber-optic network. It features smart appearance, backlight, auto-shutdown and widely dynamic range, good testing precision and universal optical connector for FC/SC/ST.

Features:

1. High sensitivity, large dynamic range
2. universal connector interface: FC/SC/ST-LC/MU.
3. Quick response, without warm-up and reduce testing time
4. Low-voltage display function
5. Optional auto-shutdown feature
6. Automatic calibration function
7. The relative ratio test
8. Large LCD display and backlight

Application:
1. Maintenance Telecom
2. Maintenance CATV
3. Test Lab of Fiber Optic
4. Optical fiber sensors

Specifications:
Type
SX503A
SX503B

Wavelength(nm)
800~1650

Detector
InGaAs

Optical Connector
FC SC ST/ Universal 2.5mm adaptor (LC,MU can be optional )

Measurement Range(dBm)
-70~+10
-50~+26

Uncertainty
¡À5%

Standard Wavelength(nm)
850,1300,1310,1490,1550,1625

Resolution(dB)
0.01

Power Supply
3pcs AAA 1.5V batteries

working time(h)
120 hours

Operating Temperature(¡ãC)
-10~+50

Storage Temperature(¡ãC)
-20~+70.



Weight:160g.

Feature
Small size, big display screen
Fast response, no need of warm-up
Universal interface
Optional auto power off function
Optional backlight turn on and off
User can adjust the standard test criterion
Water proof design, portable package
Technique Parameter
Tester model DT-603A DT-603B
Wave length Scope£¨nm£© 750¡«1700
Sensor type InGaAs
Standard wave length£¨nm£© 850¡¢1300¡¢1310¡¢1490¡¢1550¡¢1625
Power test scope£¨dBm£© -70¡«+10 -50¡«+26
Linearity 0.02dB 0.03dB
Display accuracy 0.01 dB
Connector type FC/PC; customized ST or SC
Fiber type SM¡¢MM
Auto power off time£¨min£© 10
Battery working time£¨h£© >200
Power supply AA alkaline cell, rechargeable lithium battery
Size£¨mm£© 152¡Á74¡Á26
Weight£¨g£© 200
Work temperature£¨¡æ£© -10¡«+60
Stock temperature£¨¡æ£© -25¡«+70



152¡Á74¡Á26

Optical power meter sxbk-2a

1). General
The optical power meter sxbk-2a is designed to detect the continuous optical power of wavelength ranged in 800nm-1700nm. With high resolution, it provides calibration points at different wavelength of 850nm, 1300nm, 1310nm and 1550nm, and indicates the optical power in either linear or nonlinear mode.
The instrument is supplied with a big lcd to display in various units such as mw (ª8w, nw), dbm, and db. It also provides functions including automatic range switch, automatic shutdown and battery low alarm. It features small size, light weight, elegant appearance, endurance, simple operation and low power consumption so that it can widely applied in various domains such as cable construction and maintenance, optical communication, fiber sensing, and fiber catv etc.
2). Product parameters
Probe typefc/pc
Power ranger+23 dbm to -40dbm
Wavelength ranger800nm ~ 1700nm
Calibrating wavelength850 nm, 1300 nm, 1310nm, 1550nm
Accuracyí0.15db
Resolution0.01db
Displaying unitdb/dbm/watt (mw, uw, nw)
Connectorfc/st replaceable
Battery typeone 9vdc battery
Battery service time (at normal temperature)í²10 hours
Auto shutdown time10 minutes
Working temperature -10ípc to +50ípc
Storage temperature-40ípc to +70ípc
Relative humidity0 to 95% (no condensation)
Dimensions (mm)70 íß 135 íß 24
Weight (kg)0.15

Optical power meter sxbk-2a

1). General

The optical power meter sxbk-2a is designed to detect the continuous optical power of wavelength ranged in 800nm-1700nm. With high resolution, it provides calibration points at different wavelength of 850nm, 1300nm, 1310nm and 1550nm, and indicates the optical power in either linear or nonlinear mode.

The instrument is supplied with a big lcd to display in various units such as mw (8w, nw), dbm, and db. It also provides functions including automatic range switch, automatic shutdown and battery low alarm. It features small size, light weight, elegant appearance, endurance, simple operation and low power consumption so that it can widely applied in various domains such as cable construction and maintenance, optical communication, fiber sensing, and fiber catv etc.
2). Product parameters
Probe type ¦fc/pc
Power ranger¦+23 dbm to -40dbm
Wavelength ranger¦800nm ~ 1700nm
Calibrating wavelength¦850 nm, 1300 nm, 1310nm, 1550nm
Accuracy¦a0.15db
Resolution¦0.01db
Displaying unit¦db/dbm/watt (mw, uw, nw)
Connector¦fc/st replaceable
Battery type¦one 9vdc battery
Battery service time (at normal temperature)¦10 hours
Auto shutdown time¦10 minutes
Working temperature¦ -10c to +50c
Storage temperature¦-40c to +70c
Relative humidity¦0 to 95% (no condensation)
Dimensions (mm)¦70 135 24
Weight (kg)¦0.15

Laser source

Wavelength
Bml221 1300nm & 850nm
Bml223 1310nm & 1550nm

Stabilization*
0.05db / 5minutes;
0.1db / 8hours

Output power
> - 5dbm

Modulation
270hz, 1khz, 2khz

Connecting adaptor
Fc/pc

Auto power off
About 10 minutes

Battery charge
Yes

Operate time
Above 16 hours

Power supply
Aa * 2




Size
160mm * 75mm * 32mm

Weight
About 150g

AV® 6416 Palm OTDR
Makes OTDR measurement simple and intelligent with its one–button function.

Description:
With a short 1.6m dead zone the AV® 6416 is designed for FTTx application. It can test the length, fiber loss connector loss and other physical characteristics of fiber. it can locate events on fiber cables precisely. It is really the tool of choice for FTTx application installation and maintenance as well as for fiber R&D and producing testing. AV® 6416 rugged design, lightweight and easy operation, as well as the low-reflection LCD and more than 10 hours battery life make it be perfect in filed testing. Meanwhile, Its two USB interfaces help to store and transfer traces easily and conveniently.

Features:
1. Applicable fiber: Single mode
2. Built-in Visible Fault Locator (VFL)
3. 1.6m extra-short event dead zon
4. Wavelength: 1310/1550nm±20nm
5. Dynamic Range: 28/26dB .
6. Distance Range: 4,8,16,32,64,128,256km
7. Pulse with: 10,30,80,160,320,640,1280,5120,1024ns
8. Loss threshold: 0.01dB
9. Universal connector FC/SC/ST
10. Memory capacity >800 traces
11. Interface: USB, mini USB
12. Display: Color LCD
13. One year Warranty.


Standard Package:
1. AV® 6416 OTDR
2. Universal connector
3. Testing Report
4. AC/DC adapter
5. Quality certification
6. Trace analyzing software(CD)
7. Internal Battery
8. User Manual
9. Carrying Case.

Brief introduction:
St805 pon power meter is specially designed for pon network construction and maintenance which can be connected between olt nad ont. The voice, data, video signal online can be measured and displayed synchronously with this meter.

Key features
1. Test the three wavelength of the pon network synchronously: 1490nm, 1550nm, 1310nm
2. Can test the burst mode signal of 1310nm
3. Can set the threshold value, upload data, calibrate the wavelength through management software.
4. Can save 1000 records and upload the records to the management software
5. Supply 10 groups threshold values
6. En menu display
7. Auto shut off backlit
8. Real-time display

Technical specifications
Standard wavelength: 1310(up); 1490(down);1550(down)
Pasband(nm):1260f+1360; 1470f+1505; 1535f+1570
Range(dbm): -40f++10; -40f++10; -40f++20
Isolation.1310nm++db++: ; >40; >40
Isolation.1490nm++db++: ; >40; >30
Isolation.1550nm++db++: ; >40; >40

Accuracy:
Uncertainty++db++:F+0.5
Polarization relevant loss(db++: Linearity++db++: f+0.1
Through insert loss++db++:<1.5
Resolution:0.01db
Unit:Dbm/xw
Lcd++128*64 lattices
Battery++7.4v 2800mah rechargeable li battery
Work temperature++-10f+60f
Storage temperature++-25f+70f.









Dimensions+mm:179*93*48.

Ntation
Magnification 300x, for, single, x, or, y, view, , or, 160x, for, x, and, y, view
Viewing, method Dual, cameras, with, 4.73, inch, tft, color, lcd, monitor
Operating, condition 0, to, 5, 000, m, above, sea, level, , 0, to, 95%rh, and, -10, to, 50¡ãc, respectively



Standard package

JX9010 is an optical fiber fusion splicer with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions.


According to clients needs.

Laundry Detergent Optical Brightener 71 CXT DMS CAS 16090 - 02 - 1 Optical Brightener Powder For Soap Making and For Detergent Powder Production Line,For Laundry Detergent Making For Washing Powder Soap Making, synthetic washing powder, soap, toilet soap, etc. Brightener CXT can make the appearance of soap and washing powder white and bleaching. For example, CXT was added into washing powder according to achieve the whitening effect of washing clothes, or just make the detergent looks crystal clear. Fluorescent brightener CXT is used for whitening cotton fiber, nylon and other fabrics. It has excellent whitening effect on man-made fibers, polyamide and vinylon.