Fast-drying, water-clear and easily sandable wood primer for all hard and soft woods indoors. Size 750ml 5 litres 25 litres Fast-drying, water-clear and easy-to-sand wood primer for all hard and soft woods indoors. The pores are sealed so that the subsequent varnish has better filling properties. Protects the wood from moisture and prevents the varnish from sinking. For all wood and wood materials. Weight n/a Size 750ml, 5l, 25l
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
Primer
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Gypsum rocks, gypsum powder, rock salt (industrial salt and deicing salt), food grade salt, sodium bicarbonate, limestone, white limestone (marble chips), sulphur (granular, lumps).
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
LED light.
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
1> Feature : Adjustable 2> 90° wall mount hinge , 180° glass to glass 3> Glass thickness : 8 mm~12 mm 4> Max door weight : 36 kg (with 2 hinges) 5> Material : Solid Brass 6> Some models do have auto self-closing function within 25° at both sides 7> Mickey Mouse ear design.
1> Shower Glass Clip 2> Glass thickness : 6mm / 8mm / 10mm / 12mm 3> Material : Solid Brass Keywords: Shower Shelf Clips, Glass Clips.
1. Hand Rail Bracket 2. SS304, SS316 3. Satin Finish, Mirror Polished 4. Two caps plates with Nylon spacer-Diameter of the cap plates in 38mm,including one curve plate(suitable for 50.8mm) and one flat plate, with suitable counter sunk screws.
- For glass 10mm and 12mm thickness - Material : Available in SS304, SS316, SS316L - Dimensions 49*40*26 ( 165 grams), 62*44*27 ( 280 grams) - Mirror polished or Satin Stainless Steel.
1> Shower Knob. 2>Glass thickness : 1/4"~1/2", 6 mm~12 mm 3> Available in shapes: Square, cylindrical, conical etc. 4> Size: 28mm x 33mm, 30mmx30mm, 25mmx43mm etc. 5> Solid Brass, Zinc Alloy 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze. Keywords: Shower Door Knobs, Glass Door knobs
1> Back To Back Towel Bars(with and without metal washers) 2> Pull handled available in various sizes with back to back Towel bars 3> Glass thickness : 6 mm~12 mm 4> Size: 19 x 6"/8"/10/12"/18"/24" C/C 5> Material :304 Stainless Steel / #62 Brass Tubular 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
1> Shower Screen Connector / Shower Support Bar Bracket. 2> Glass thickness : 6 mm~12 mm 3> Size: 19mm / 22mm / 25mm Diameter. 4> Material : Solid Brass 5> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
We have range of patch fittings suitable for 8-15mm tempered glass doors. 1. Our patch fittings are suitable for 10mm, 12mm tempered glass doors 2. Bottom Patch fitting. 3. Top patch fitting. 4. Side Over panel. 5. Top center 6. Inserts available for most of the floor springs. 7. Aluminum, SS304. 8. Polished Stainless steel, Satin Stainless steel,aluminium oxsilver ,Aluminum Gold color.
Solid brass with chrome plated one half has m6 304ss pin length 40mm with tapered end 22mm exposed balance inside hinge Other halve has hole for m6 pin, screw holes to be chamfered 4 screws mild steel m6 hex x 8mm long posi drive per hinge (anti vibration screws) Weight :90gms include ss pins
