Applications: Long distance outside telephone, catv, data, communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial (with armoring). Construction: The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation) Minimum bending radius: Short term installation: 20 x overall diameter Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored) Twist (torsion length): 125 x overall diameter Working temperature: -40íµ ~ +70íµ (pe sheath) Storage temperature: -50íµ ~ +70íµ (pe sheath) Product highlights: All the fiber containing tubes are placed in concentric layers around the central member; through the control of The twist length, the fiber cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene, Are placed at the centre of the cables. Roll, box, drum
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
Feature: Steel-wire parallel member,filler protect tube fiber steel tape amored; Excellent mechanical and environmental performance; compact structure; can be installed conveniently and operated simply. Application: Adopted to Outdoor distribution; Suitable for aerial .pipeline laying method; Long distance and local area network communication.
Product Description 1) Gel filled mulit loose tube provide good protection for the coating fiber 2 Steel wire/FRP as central tension strength 3) Good ultra violet radiation resistant 4) Double sheath and conrrugated steel tape armored..Good moisture-resistance. 5) Single mode G652D fiber type . APPLICATION 1) Adopted to Outdoor Direct buried,Aerial, Duct installation 2) Access network and local network in high electromagnetic interfering places. Information OF 12CORE GYTA53 FIBER CALBE No. of Tube 2Looses tube+4Filler tube No. of fiber/Tube 6Fibers No. of fiber 12 Fibers Approx. Cable Diameter 13.4~19.6mm Loose Tube Material PBT Filling compound (Tube) Thixotropic Jelly Strength Member Steel Wire or FRP Water Blocking Water Swell able Material Corrugated Steel Tape Nom. 0.25mm Thick. Outer Sheath Nom. 2.7mm Thick. Black MDPE Mechanical & Environmental Performance Tensile Strength Long Term: 1000N, Short Term: 3000N Crush Resistance Long Term: 1000N, Short Term: 3000N Bending Radius Long Term: 10D, Short Term:20D Storage Temperature -20~+60°C Optical Fiber Performance Fiber Type G.652D,125.0±1.0µm Mode Field Diameter 9.2 ± 0.2µm at 1310 nm Cladding Diameter 125 ± 1µm Cladding Non-Circularity: = 1% Coating Diameter 245 ± 10µm Attenuation Coefficient = 0.36dB/km at 1310nm, = 0.22dB/km at 1550nm Chromatic Dispersion =3.5ps/nm/km at 1285~1330nm, =18ps/nm/km at 1550nm Zero Dispersion Wavelength 1300~1322nm PMD Coefficient = 0.2ps/vkm
Product Name : Loose Fiber Product Description : Used for upholstery & for filling pillow, toys etc Price of product ( USD price or FOB price) : USD 2.31 - USD 2.5 Product origin : Made in UAE Key Specifications/Special Features : Our loose fiber is also the best quality in the UAE market.Texture is normal as for pillow. Comes in 5kg bags & 20kg bags. We can adjust to any types of kg packing. Also available vacuumed. Color: White Made in UAE Payment terms: Advance 30% & 70% on BL Minimum Order Size and Packgaing details : If out of UAE then Min Order 1 20ft container or full trailer. If want fewer qty we are flexible, discuss with us. Within UAE Min Order 5kg (1 bag)
Domestic wire, house wire, submersible cables (flat / round), single core flexible cable, multi core flexible cable, xlpe insulated pvc sheathed power cable, xlpe insulated armoured control cable, pvc insulated armoured control cable, xlpe insulated unarmoured control cable, pvc insulated unarmoured control cable, optical fiber cable, optical fiber armoured cable, ftth drop cable, instrumentation cable, shielded cable. networking cable, cat 6 cable, cat 6 utp cable, cat 6 stp cable, cat 6 sftp cable, cat 6 ftp cable fire alarm cable, fire survival cable, data cable, electric cable, coaxial cable, cctv cable, travelling cable, lift cable, lift traveling cable.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Application :- These multi core flexible cables are used for wiring in control panels, machines and various electrical installations in dry and damp interiors specially under typical industrial environmental conditions. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables offer low conductor resistance. These wires are insulated with a special grade PVC compound formulated and manufactured in-house. The tough robust outer PVC jacket protects it from oils, greases and various chemicals and abrasions, thereby giving long life and electrical safety. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.50 to 4.00 Sq. mm in 2 core to 19 cores & 6.00 to 120.00 Sq. mm in 3 core and 4 core. Color Codes : Black and Grey Outer Sheath 2 Core Cables - Red, Black 3 Core Cables - Red, Black & Green (for Earth) 4 Core Cables - Red, Yellow, Blue & Green (for Earth) 5 Core Cables - Red, Yellow, Blue, Black & Grey Specification : IS:694 Packing : In 90 meter coils, higher sizes in drums.
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct Buried type Fiber Optical Cables are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of Dry Water Block Technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel Tape Armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra Strength cable can also be delivered with Peripheral Strength Members. Features & Application òExcellent optical, mechanical & environmental performance òHigh strength-to-weight ratio òCSM dielectric type û Fiber Reinforced Plastic òDry block construction òHigh tensile strength òHigh crush strength òCorrosion resistance òKINK resistance òVery light weight òVery flexible & small bending radius òLong haul / backbone application òJunction communication systems òAll dielectric applications òCATV applications. Construction Parameters Fiber Count 02 û 144 Fibers Color of Loose Tube Blue , Orange , Green , Brown , Grey , White, Red & Black Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber Reinforced Plastic (FRP) û Non Metallic Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Second (Outer) Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members. Features & application Excellent optical, mechanical & environmental performance High strength-to-weight ratio Csm dielectric type û fiber reinforced plastic Dry block construction High tensile strength High crush strength Corrosion resistance Kink resistance Very light weight Very flexible & small bending radius Long haul / backbone application Junction communication systems All dielectric applications Catv applications. Construction Parameters Fiber Count As per CustomerÆs Requirement No. of Loose Tube As per CustomerÆs Requirement G.655 As per CustomerÆs Requirement G.652 As per CustomerÆs Requirement Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP) Armoring Corrugated Steel Tape Armoring Peripheral Strength Member (if required) Aramid / Glass Yarn Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Outer Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
Product description This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings. Features & application Excellent optical, mechanical & environmental performance Csm dielectric type û fiber reinforced plastic High tensile strength High crush strength Aerial application Application in lan, wan, especially in ftth networks Easy to clamp and install Can bear ice loads and high wind pressures. Construction Parameters Fiber Count 02 to 12 Fiber Fiber Type G.652.D Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm Nominal Cable Delivery Length (km) 2 KM + 3% . Mechanical Characteristics Tensile Strength (N) 600 Tensile Strength (N) (Installation) 1000 Crush Strength (N) 2,000 Minimum Bending Radius (mm) 75 Temperature Operating Range -10 to +70¦C.
Low voltage power cables, mid voltage power cables, control cables, instrumentation and telecommunication cables, optical fiber cables, mine low voltage power cables, mine mid voltage power cables, rail transit communication cables, railway rolling stock cables, cables for use in photovoltaic systems, fireproof cable, low voltage power cables for shipboard and offshore, mid voltage cables for shipboard and offshore, control cables for shipboard and offshore, instrumentation and telecommunication cables for shipboard and offshore compensating extension cables and compensating cables, rubber sheathed cable, charging post cable, connecting cables for equipment, towline cables, high temperature resistant cable,esp power cable, (electrical submersible pump power cable), mining detection cable, logging cable, submarine power cable.
Please quote for the following wholesale product requirement - Product Name: Optical Fiber Cables Specifications: Type: Optical Fiber (POF), Transparent Glass Or Plastic Fibers Voltage: Low & Medium Material: Plastic Fiber, Rubber Use: Industrial, Construction Size: Customized Packaging Terms : Standard
our company has engaged in fiber communication products for 15 years, our main products are optical cable and FTTx system products,including Outdoor Fiber Optical Cable,Indoor Fiber Optical Cable,Data Cable,Municipal Telephone Cable,etc. For the individual or enterprise who has the requirement for setting up the optical cable factory or communication product assembly factory, we will provide service of factory planing and designing, production line installation and commissioning, product design and testing , production process control and technic support. We supply all the raw materials too. KINGFIBER is devoted to build a win-win relationship with our partner. If you have any requirements in fiber communication products, please contact me at any time,and I will provide you more details with catalogue.Thank you. Best regards, Andy Ma Vice General Manager Henan Kingfiber Industry Co.,Ltd
Optical Fiber Cable : We carry brand names such as Asahi/Lucina and Showa Electric Wire Cable
Gyfta53 fiber optic cable characteristics: fiber optical cable 1.Accurate fiber excess length ensures good mechanical and temperature performance Gyfta53 fiber optic cable brief introduction The fibers, either of single-mode or multi-mode type, are placed in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A piece of fiber reinforced plastic (frp) locates in the center of core as a non-metallic strength member. The tubes(and fillers) are stranded around the strength member into a compact and circular cable core. An aluminum polyethylene laminate (apl) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin pe inner sheath. After the psp is longitudinally applied over the inner sheath, the cable is completed with a pe outer sheath. Gyfta53 fiber optic cable pictures: 1.Gyfta53-fiber-optic-cable Gyfta53 fiber optic cable fiber optical cable Gyfta53 fiber optic cable paramters: fiber optical cable Gyfta53 fiber optic cable Wooden drum // special package can be customized.Inspection certificate of fumigation should be notified before production as it will take 7 days from application to approval.
Optic fiber cable for duct, direct burial, aerial application 3km per wooden drum optic fiber cable or by customers' require