Mechanical press Voronezh kb 8544, 2500 t, 1984 Smeral lzk 2500 p, 1984 Voronezk ka 8046, 1989 Sumitomo tfpa 5000, 1977, never used Smeral lzk 3150 , 1984 Smeral lzk 1600 Smeral lzk 4000, 1984 Power hammer huta zygmunt mpm 16.000 b, 1976 Rotary forging machine gfm sg 441, 1976
We cater a large assortment of technically advanced mechanical press brake machine that is manufactured from the premium quality raw materials. We have carved a niche as one of the overriding mechanical press brake exporters from india. Mechanical press brake is specially designed to give maximum rigidity and minimum deflections. Ne
Details Capacity 400 Ton. Min. daylight PMI 643 mm.. Adjustment 305 mm. Stroke 610 mm. Superior plate dimenstions 2.743 mm. x 1.524 mm. Inferior plate dimentions 2.743 mm x 1.524 mm Table hight above the floor 463 mm Inferior cushion capacity 70 Tn. a 5 bar. Inferior cushin stroke 203 mm R.P.M 20 gpm New in 1.985 Main motor power 63Kw Pressure 380 V / 50 Hz.
Product Description Control Type CNC, Non-CNC Automatic Grade Automatic , Semi-Automatic, Manual Max Sheet Width 1 Meter, 2 Meter, 3 Meter, 4 Meter, 5 Meter, >5 Meter Cutting Load 0-30 Ton, 30-60 Ton, 60-90 Ton, 90-120 Ton, 120-150 Ton, >150 Ton Brand Monotech Length Of Table 2500~8000 Mm Main Motor 5.5~55 KW Nominal Pressure 630~8000 KN Minimum Order Quantity 1 Unit Backed by rich industry experience, we are manufacturing and supplying optimum quality Mechanical Press Brakes. The range we offer is manufactured using steel frames and plates. Our range is designed in interlocked construction with a bed directly supporting on the side walls to ensure accuracy & perfect alignment. Features: Rust resistant Sturdy construction Excellent performance
We hold aptitude in assembling and supplying quality guaranteed scope of JIB Crane that are recognized for impeccable quality and solid wrapping up. These items are utilized for stack in gand lifting over whelming hardware and amassing and is mantle substantial burden machinery Features: Rigid construction Trouble free functioning Improved leveling accuracy
High-performance open-type press with fixed bed of series jz21 has features of: 1.High rigidity: steel welded frame with less deformation to ensure long die durability. 2.High strength: long service life. Important parts adopt high quality material with heat treatment. 3.High accuracy: slide employs 6-side rectangle guide which guides well and precisely. 4.High safety: a variety of steps have been taken to ensure the safety of operation. When the press is in the overload condition, the hydraulic overload protector sensitively prevents the machine and the die from being damaged. 5.High reliability: the adoption of programmable controller (plc), high quality electrical and sealed parts ensure the reliability of machine. 6.Low noise: pneumatic wet-type friction clutch-brake is applied. Main drive gear, immersed in a closed oil tank, runs smoothly with low noise. (model jz21-400c adopts dry-type friction clutch-brake). 1
Specifications 250 ton capacity power press, flywheel mechanical press, 250 ton power press for sale Features of j23 series power press machine: , j23 series open eccentric presses is a general-purpose presses, suitable for forming, blanking, punching, bending and other cold stamping process. , c-frame casting fuselage, maximum rigidity and minimum deflection for accurate parts and long tool life. Body can be tilted, , high rigidity and less deformation compact. Thick plates and large columns provide you with the stable platform you need for your demanding application. , tma machine uses rigid rotated bond clutch rigid and well supported. The clutch gives continuous strokes for mass production. , crank shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life & accuracy. , properly sized flywheel, is made of high grade cast iron, for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running. , gear are of steel cast or fabricated. Gear teeth are generated by precision hobbling machine. , machine is with both hands button and foot switch control: anti-tie down, non-repeat controls with ring guards; conforms to osha. , protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch, easy to operate.
Pneumatic & mechanical power presses In all capacities. With panel board and electricals With all standard accesories 300 kg to 6000 kg
Mechanical power press
Shailesh brand power press With accessories and motor and stool Extra electricals difference Inclinable body with 75*. Operated with foot standard Available foot and hand operated With safety equipment (tools)
3 ton to 250 ton available full steel body manufacturer and exporter all specifications fillfull for buyer requirements
Introduction The puncher is a general punch machine used for pressing sheet metal,which is suitable for cold pressing,such as shearing,punching,blanking,bending and shallow drawing,but it is not suitable for stamping.The body of the press machine can be tilted so as to facilitate the finished products falling down from the die. Features 1.Large operation space,and the movable bolster could be moved out of frame to set the die. The structure is simple and the appliance is also beautiful. 2.The machine adopts double safety valve to ensure the accurate implementation of the clutch instruction. 3.It has both hands button and foot switch to achieve continuous,single and inching practices. 4.Electrical components are in accordance with international standards,reliable safety,long life,good anti-interference ability,a radiation unit is fitted in electrical cabinet. Technical Parameter Item Units Value Nominal pressure KN 400 Nominal stroke mm 7 Slide stroke mm 100 Stroke number min-1 55 Mold set height mm 290 Mold height adjusting amount mm 75 Slide block central distance mm 210 Working table size Front and back mm 400 Left and right mm 610 Working table hole size Front and back mm 150 Left and right mm 300 Diameter mm 200 Sliding block underside size Front and back mm 220 Left and right mm 242 Die shank hole size Diameter mm 50 Depth mm 70 Stand column distance mm 290 Working table thickness mm 60 Inclination Angle 15 Boundary dimension Front and back mm 1550 Left and right mm 1140 Height mm 2280 Motor power KW 3 Weight Kg 2660
J23 series Open Eccentric Presses is a general-purpose presses, suitable for forming, blanking, punching, bending and other cold stamping process. C-frame Casting fuselage, maximum rigidity and minimum deflection for accurate parts and long tool life. Body can be tilted, , high rigidity and less deformation Compact. Thick plates and large columns provide you with the stable platform you need for your demanding application. TMA Machine uses Rigid rotated bond clutch rigid and well supported. The clutch gives continuous strokes for mass production. Crank shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life & accuracy. Properly sized flywheel, is made of high grade cast iron, for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running. Gear are of steel cast or fabricated. Gear teeth are generated by precision hobbling machine. Machine is with both hands button and foot switch control: anti-tie down, non-repeat controls with ring guards; conforms to OSHA. Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch, easy to operate.
Plate and Frame Electric Mechanical Compacting Filter Press Details for our Plate and Frame Filter Press Electric Mechanical Compacting Filter Press is adopting advanced world famous brand components in mechanical parts, electric parts and operation parts. The Filter Press has 320/450/630/800/1000/1250/1500/2000 types. Automatic hydraulic compact filter filtration area ranges from 0.5 to 2000 square meters. Compaction types include jack compacting, mechanical compacting, hydraulic compacting, etc. The material of filter plate contain enhanced polypropylene, TPE, glass fiber polypropylene, cast iron, stainless steel, etc.
There are briquetting moulds for making biomass sticks and pelleting moulds for making small pellets: Features of mechanical stamping briquette machine: Processing various biomass materials Convenient for transportation and storage Long service life, good strength, toughness and wearability High production efficiency, low power consumption (produce per ton of biomass briquettes consume 40 kwh).
Air clutch & brake High performance crank and guide way Easy maintanence All working condition shown by touch screen Several quality die makers support. 2615¡á1690¡á4075 (l¡áw¡áh) Weight:23t
Stroke 6 Bed to ram 22 Bed size (l to r) 42 Bed size (f to b) 32 Crank dia. 8 Fly wheel dia. 48 Gear dia.42 Hole in ram2 H.P.15 Wt. In tonnes7.5 Packed in wooden case size 50" x 65" Weight of machine: apprx.7500 kgs