We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Silicone rubber surfactant (Organic silicone surface additive) Application:
It can be used as a spray modifier, foliar absorption aids, activation agent, widely used herbicide, liquid nutrients, growth regulators, insecticides, fungicides, which do not decompose the original pesticide, can greatly reduce the surface tension of the solution, reducing the contact between the droplet and the leaf angle, surface enhanced the liquid in the plant or pest surface wetting, adhesion, and a spreader, thereby improving efficacy.
Silicone surfactant ZINCA-2000 is lower phytotoxicity and environmental hazards than the normal fatty amines, ethoxylated alcohol surfactant, and greatly reduce human and environmental impact.
Nitrile butadiene rubber, also known as nitrile rubber , NBR, Buna-N, and acrylonitrile butadiene rubber, is a synthetic rubber
derived from acrylonitrile (ACN) and butadiene.
Product Paramenters
Item Units Appearance
Type QD-701
Appearance Milk white
Solid content % 43.5-46%
PH value Min 8.0
Viscidity mPa.s Max 40
Coagulum % Max 0.1
Mechanical stability % Max 0.1
Liquid Silicone Rubber (LSR) is silicone rubber made from a liquid compound. This liquid compound mainly consists of silicone polymer and fumed silica, which are well known for being non-toxic and temperature resistant.
The molding process can be injection, pouring, brushing, dip-coating, etc.
Main applications include:
Baby products: Baby nipple, especially for those requiring high biting force; breast pump, etc.
Medical products: Laryngeal mask, catheter and negative pressure drainage ball.
Kitchen products: bake ware, silicone scoop, etc.
Industry product:: Key button, sealing rings and small parts.
Electric product: cable joint, insulator, etc.
Silicone over-molding product: Plastic stick with silicone rubber, with or without primer.
6151 Liquid Silicone Rubber Bluetooth Headset Suppliers
Short on time? Let Liquid Silicone Rubber Bluetooth Headset sellers contact you.
Tin-based silicones, also called condensation-cure silicones, are two-component materials which cure at room temperature(RTV)to flexible, high tear-strength rubbers. Tin cured silicones can be poured onto models or they can be made brushable by adding a thixotropic additive. They are ideal for molds where easy release or high temperature resistance is required. Tin cured silicones can be used for casting polyurethane, epoxy and polyester resins, waxes, all gypsum products and low-temperature metals. Our tin-cured silicone systems are
the most economical. They are best used for casting resins and low melt metals.
Frequency band: 2.4 ghz to 2.483ghz, one sm band
Talking time: up to six hours
Standby time: up to 150 hours
Operating distance: ten meters(class 2)
Charging time: within three hours
Dsp: full duplex transmission, noise suppression, and echo cancellation.
Signal-to noise: > 60db with 15bit sound effect decode
Bluetooth profile support: compatible with bluetooth enabled devices, including mobile phone, pc, pda, printer, and more
Certification: ce, fcc, and bqb
Specifications:
Talk time: up to four hours
Standby time: up to 70 hours
Weight: 11g
Components:
Obluetooth headset
Travel adapter
User manual
This Bluetooth Headset use rechargeable battery. You can recharge it easily from power adapter. Our Bluetooth handset has less than 1/100 electromagnetic wave of cellular phone. You can prevent enormous electromagnetic wave from using cellular phone directly.
1. Application of liquid silicon rubber for toe spreaders:
The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.Q
This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care.
2. Aadvantages of liquid silicon rubber for toe spreaders:
1. High transparency.
2. High fluidity, high curing rate.
3. Pressure release.
4. Shock absorption.
5. Multiple density
3. Datasheet of liquid silicon rubber for toe spreaders:
4. Package and storage of liquid silicon for Toe Spreaders:
1). 20kg or 200kg /drum.
2). It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain.
Place of Origin: Guangdong China
Brand Name: Hong Ye silicone rubber
Minimum Order Quantity: 200 Kilogram
Delivery Time: within 3 days after payment confirmed in our bank.
Supply Ability: 8 Tons per Day
Payment Terms: L/C, T/T, Western Union
Price Terms: FOB, EXW, CIF, CNF
Packaging Detail: 1kg/Jar,5kgs/Jar,20kg/drum,25kgs/drum,200kgs/drum
Further information for silicon Toe Spreaders, please feel free to contact Miss COCO:
Website: http://www.szrl.net
Tel: +86 -0755-89948294
FAX: +86-0755-89948030
REMARK:
The product should be closed tightly, protected from light and moisture, the shelf life is 12 months.
These figures are for reference only, please contact us for detail.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
Pad printing silicone rubber is rtv2 silicone, also called two components silicone or two parts silicone, part A and B will vulcanize in room temperature when A and B mixed.
The mix ratio of tin cure silicone is 100:3, the platinum cure silicone is 9:1.
Description of Liquid Silicone Rubber for Pad Printing
Liquid Silicone Rubber for Pad Printing Mainly used for making plastic toys, electroplating products, electronic toys, trademarks, communications equipment, gifts, stationery and other irregular pattern. Pad printing is the pattern on the plate carrier made by plastic head, then transfer the pattern on the plate on the toy products, Pad printing silica gel demand quality exquisite, no impurities, rebounwell, apply oil well, a clear printing pattern
Feature of liquid silicone rubber for pad printing
1, Oil fell oil effect is good
2, Exquisite, good resilience, printing more often, no impurities, no particles
3, Printing clear pattern
4, Low viscosity, good fluidity
5, No shrinkage, easy apply oiling , clear printing pattern
Precautions of liquid silicone rubber for pad printing
No mixing with acid-base materials, alkoxy silane or high temperature water vapor, otherwise there is the
tendency of curing and viscosity changes.
[ Sample ]
We can send 1kg sample for free ,but the shipment charge usually paid by your side
[ Rapid response to your needs ]
We will be answer within 24hours.
Welcome to contact with us if you have any problems.
1.Description of liquid silicone rubber
C830 Silicone rubber is condensation cure silicone rubber for mold making. The silicone rubber will be cured under room temperature, It’s two-components, the mixing ratio is 100:2 . Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability. C-830 tin cure mold silicone has a good property , it is suitable for various mold making .
2.Characteristics of liquid silicone rubber
*An exceptional fluidity and good operability, easy to demold
*Good tensile strength and tear strength
*lower shrinkage
*non-deformation ,non-oily
*good flexibility
*eco-friendly
*long shelf-time &lifetime
C830 Silicone rubber is mainly suitable middle sized product and big size with simple pattern.
Package:
1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum based on vacuum packing.
Shelf life and transportation
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
1. Description of food grade liquid silicone rubber for making mould
Addition-curing, Food grade, Translucent, Two-component mold making silicone.
2. Characteristics of food grade liquid silicone rubber for making mould
Acceptable for food contact
Outstanding release properties
Low viscosity
Easy mixing and degassing
High flowability
Odorless and Nontoxic
Enhanced durability
3. Application of food grade liquid silicone rubber for making mould
Food Grade Related Applications
Cake mold
Chocolate moldmaking
Candy moldmaking
Baking moldmaking
Ice trays molding
Casting butters
Casting for Kitchen products
5. Using instructions of food grade liquid silicone rubber for making mould
Step 1: Prepare and clean the prototype.
You must make sure your original molds perfect, fix the original mold on a board, then using some assistant material (like cardboard) to make a frame for to surround the prototype. The frame is no need, if we make the mold by brushing way.
Step 2: Take the silicone and catalyst as the ratio 100:2 (silicone : catalyst= 100:2), mix the silicone rubber and catalyst evenly.
Notes: rtv silicone rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicone rubber will be partly solidified and this will bring troubles for your final operation. What's more, the finishes molds will have a short life. All of these will cause a waste of silicone rubber.
Step 3: Vacuum pumping.
After mixed the silicone evenly, it is better to release the bubble by vacuum pumping.
Step 4: Pouring cast or brushing cast.
After released the bubble, we can pour/brush the silicone rubber on the prototype.
Notes: Please finishes all the steps within the operation time. If not, it will cause cross linking reaction, and no more further steps will be available. So, we have to pay attention to the pot life and curing time.
Packaging & Shipping
Packing:
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
25KG/drum vacuum packing for part A + 25KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
1. Description of rtv 2 liquid silicone rubber for frame gypsum molds
C830 silicone rubber is condensation cure silicone rubber (tin cure silicone rubber) for mold making. The silicone rubber will be cured under room temperature. It's two components, the mixing ratio is 100:2. Part A is a flowable liquid silicone, part B is the catalyst. It has an exceptional fluidity and good operability.
2. Characteristics of rtv 2 liquid silicone rubber for frame gypsum molds
* An exceptional fluidity and good operability, easy to demold
* Good tensile strength and tear strength
* Suitable hardness
* Copy detailed pattern
* Good flexibility
* Eco-friendly
* Long shelf-time &lifetime
3. Application of rtv 2 liquid silicone rubber for frame gypsum mold
C830 liquid silicone rubber is perfect molding material, it is suitable to make mold for concrete casting, artificial stone, brick, cement casting, gypsum decorations, plastic product, resin craft, polyester, polyurethane, bronze casting, statues, jewelry, wax, crystal, tire mold, shoe mold, clay casting, ceramic casting. etc.
C830 liquid silicone rubber is mainly suitable for small or middle sized products with delicate pattern by pouring and brushing operation.
Shelf life and transportation
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
Upgrade Bluetooth 5.1 chip, reduce picture synchronization delay, and strengthen signal connection to maintain continuous stability even in bumpy steps
Take out the headset from the charging bin, and Bluetooth will automatically connect and pair, bringing a more humanized and comfortable use experience
The external microphone will detect external sound waves, and then before you hear these noises, the noise reduction chip will send out equivalent sound waves to cancel them, so as to reduce noise
Compared with the traditional Bluetooth headset in the past, it has not only greatly improved the bass effect, but also greatly improved the sound quality fidelity and anti-interference
Using real copper ring large dynamic horn, supplemented by black technology graphene diaphragm, restore delicate vocal instrumental music, solid and surging drums, and experience the surround 3D stereo effect from human ear to brain
Intelligent noise reduction technology, combined with in ear sound insulation design, realizes high-definition call effect and can talk efficiently in noisy environment
With finger touch, you can cut songs, answer, hang up, voice assistant and other functions
It has excellent endurance, provides long-term power output for headphones, and makes your travel always accompanied by music
5 degree angle inclined into the ear, in line with ergonomics, more appropriate to the ear, Golden Triangle arc groove, more firm to wear, no pain and more comfortable to wear for a long time
Addition Cure rtv-2 Liquid Silicone Rubber for Concrete & Stone moulds
Artificial Stone & Concrete Casting Silicone Rubber
Features:
Amazing fluidity and easy to operate
Platinum-based, food-grade silicone (environmental friendly, odorless -and non-toxic)
Delicate design available
Mixing ration: 1:1, easy to mix
Easy de-molding
Excellent tension and tear strength
High performance in duplication
Shrinkage is almost zero (below 0.1)
Excellent resistance to weather, temperature, aging, acid and aging-proofing.
High resistance to high temperature and aging(resist -60â?? to 250â??)
Appearance:
Part A:a non-toxic and odorless liquid with translucent color and platinum inside.
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.
Technical Data
Characteristics of the non cured product
Properties G-820 G-825 G-830 G-835 G-840
A B A B A B A B A B
Appearance low viscous liquid
Colour translucent
Density [g/cm 3 ] at 23 �°C, approx 1.10 1.10 1.10 1.10 1.10
Viscosity [mPa�·s] at 23 �°C, approx 5000�±1000 6000�±1000 7000�±1000 8000�±1000 9000�±1000
Polymerisation
Curing conditions: 1h at 80 �°C
Properties G-820 G-825 G-830 G-835 G-840
Hardness Shore A 20�±2 25�±2 30�±2 35�±2 40�±2
Tensile strength [N/mm 2 ] 45�±10 50�±10 55�±10 55�±10 60�±10
Elongation [%] 500�±50 500�±50 450�±50 450�±50 450�±50
Tear strength [N/mm] 22�±2 24�±2 26�±2 24�±2 12�±2
Application:
GC RTV silicone G-8 series are great for artificial stone casting. They are widely used for architectural elements, block-outs & hole former, concrete counter tops, flexible form liners, GFRC, manufactured stone veneer, ornamental precast & statuary, stamped & textured concrete, etc.
Operation Method:
Both pouring and brushing operation methods for our artificial stone casting silicone are available. You can choose the best one as your preference, we can provide thixotropic agent for brushing.
Notice
What is the hardness should I choose?
Normally 20~40 Shore A will be the best, but it also should according to your size and pattern design.
Warm Tips:
The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry.
Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing.
Be aware of possible cross-contamination; it's highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices).
Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include:
-Natural or synthetic rubber, vulcanized with sulphur derivatives.
-Poly-condensation RTV catalyzed with metallic salts.
-PVC stabilizing agents.
-Amine cured epoxies.
-Sulphur, tin and amines derivatives.
-In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.
Description of platinum curing mould making liquid silicone rubber
Addition cure silicone is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1. It can cure at room temperature as well as under heat. It's a kind of food grade silicone and mainly used for mold making.
Application of platinum curing mould making liquid silicone rubber
Silicone rubber is mainly used for making molds of tire, concrete stone, grc, polyurethane products; wax, candle decoration; rapid prototyping and tyre molds; chocolate, candy and similar products.
Brief description:
Silicone rubber for mold making:
1. Resistance to deformation, high-temperature
2. High reproduction times
3. Good tensile strength
4. Exceptional fluidity and good operability.
25kg/drum
6151 Liquid Silicone Rubber Bluetooth Headset Suppliers
Short on time? Let Liquid Silicone Rubber Bluetooth Headset sellers contact you.
