Melting point 151-154 C(lit.)
Boiling point 265 C100 mm Hg(lit.)
Density 1,36 g/cm3
vapor density 5 (vs air)
vapor pressure 1 mm Hg ( 159.5 C)
refractive index 1.4880
FEMA 2011 | ADIPIC ACID
Flash point 385 F
storage temp. Store below +30C.
solubility methanol: 0.1 g/mL, clear, colorless
pka 4.43(at 25)
form Solid
color White
Odor wh. monoclinic prisms, pract. odorless
PH 3.74(1 mM solution);3.22(10 mM solution);2.71(100 mM solution);
Water Solubility 1.44 g/100 mL (15 C)
Merck 14,162
JECFA Number 623
BRN 1209788
Exposure limits ACGIH: TWA 5 mg/m3
Stability Stable. Substances to be avoided include ammonia, strong oxidizing agents.
InChIKey WNLRTRBMVRJNCN-UHFFFAOYSA-N
LogP 0.09 at 25â??
FDA 21 CFR 184.1009; 582.1009; 175.300; 175.320; 177.1680
Substances Added to Food (formerly EAFUS) ADIPIC ACID
SCOGS (Select Committee on GRAS Substances) Adipic acid
CAS DataBase Reference 124-04-9(CAS DataBase Reference)
EWG's Food Scores 1
FDA UNII 76A0JE0FKJ
NIST Chemistry Reference Hexanedioic acid(124-04-9)
EPA Substance Registry System Adipic acid (124-04-9)
Material: Flint glass, UV fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si etc.
Dimension: 4mm-- 100mm
Angle tolerance: 30" --3'
Surface accuracy: lambda/10--1 lambda
Surface quality: 60/40
Clear Aperture: 90%
Coating: custom design
Besides, there are a large volume of stock optical components in various shapes and sizes to facilitate quick deliveries.
870 Lehmann Prism Suppliers
Short on time? Let Lehmann Prism sellers contact you.
Corner Cube Prism is also called Retroreflector or Trihedral Prism. In the Corner Cube Prism, three reflecting surfaces are perpendicular to each other, like the side wall of the cube. The input surface is perpendicular to the cube diagonal. Disregarding the angle of incidence, the output beam is parallel to the input one, but it is of opposite direction. Inset of the several corner prisms, for better matching, their entrance-exit surface is often hexagonal. In case of this prism the phenomenon of full internal reflection occurs so it is not necessary, (however it is possible) to put mirror coating on the reflecting faces. Normally the reflection surfaces are Al reflection coating, and then covered with Cu and Black Painting.
Note for corner cube retroreflector:
(1). Besides N-BK7, custom-made corner cube Prisms made of other optical materials are available.
(2). Corner Cube Prisms with lower deviation tolerance, such as 1, 30, or 10, are available.
(3). Corner Cube Prisms with better surface Quality (better than 40/20 or 20/10) are available.
(4). HR or Metal reflection coating(Al, Ag, Cu, etc.) on reflection surfaces is available.
(5). AR coating on input/output surface is available upon request.
(6).Custom-made non-standard Corner Cube Prisms at any other size are available upon request.
* Soluble in acid and ammonium chloride, insoluble in water and ketone.
Application
* It is mainly used to manufacture special alloy precision optical glass, high refractive optical fiber board, suitable for making
cameras, microscope lenses and advanced optical instrument prisms, etc. *
* It is also used to manufacture ceramic capacitors,
piezoelectric ceramic dopants and X-ray luminescent materials such as lanthanum bromide oxide powder. It is used as a catalyst for
various reactions. Lanthanum oxide impregnated with lithium oxide or zirconium oxide (1%) can be used to manufacture ferrite
magnets, fiber optical devices and optical glass.
Roof Prism
A roof prism is a reflective optical prism to make two cross beams be parallel with each other. It contains a section where two faces meet at a 90 angle. These two 90 faces resemble the roof of a building, giving this prism type its name. Reflection from the two 90�° faces returns an image that is flipped laterally across the axis where the faces meet.
In some cases, passing through the prism, the image is both deflected right-to-left and top-to-bottom. The hypotenuse of the prism utilizes total internal reflection (TIR) to reflect the image through the prism. Polarization states may become rotated during reflection.
As a rich experienced manufacturer, substrate material in Photonchina can be chosen from all optical glasses (N-BK7, for instance), Fused Silica, Si, ZnSe, ZnS, CaF2, MgF2 etc.
Photonchina has been focusing on dove prism manufacture for more than decades in order to meet demands of customers worldwide in applications ranging from image displaying to fiber communications.
Dove prism is a type of reflective prism which is used to invert an image. These prisms are shaped from a truncated right-angle prism. A beam of light entering one of the sloped faces of the prism undergoes total internal reflection from the inside of the longest (bottom) face and emerges from the opposite sloped face. Images passing through the prism are flipped, and because only one reflection takes place, the image's handedness is changed to the opposite sense.
If you look through the prism and rotate it around a longitudinal axis, the image rotates through twice the angle through which the dove prism itself rotates. For optimal performance, you may use dove prisms with collimated light. The top surface of each dove prism is ground and the longest length features an unbeveled sharp edge.
Dove Prisms are offered uncoated, with anti-reflection coated diagonal faces, or with aluminized diagonal faces. Aluminized dove prisms feature a protected aluminum coating with black Krylon paint on the diagonal faces and are ideal for displaced retroreflection. They provide a u-turn for incident laser beam light.
We will also do according to the specifications such as size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries.
1.Material: bk7, fused silica and other optical glass
E specifications such as size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries.
We will also do according to the specifications such as size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries.
We will also do according to the specifications such as size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries.
Powellenses is one kind of opticaruling lens, xi'an lingyue machinery&electr.Ltd.Cnsupply powellenses that divergence angle from 10íp to 100íp, the standard have 30íp\45íp\53íp\60íp\70íp\85íp\90íp.
When 1mm laser bean get through the powellenses, it is optimized transformed a line which is uniform, stability, straight .Lineation by powellenses is better than aspheric lensse, as by powellense can cancelling centrahotspot of gaussian beams and fade-marginadistribution.
Applied range:
Laser scriber
Machining -position by makeing
Building- graticule by makeing
Laser scanning system
Customs can order by index following
Divergence angle
Work distance
Beam wavelength or beam diameter
Width of lineation.
