Find Verified Lapis Lazuli 7 Point Pyramid Energy Generator Suppliers, Manufacturers and Wholesalers

Mace Botanical: Myristica fragrans Family: N.O. Myristicaceae Hindi Name: Mace - Javitri General Description: Nutmeg, spice consisting of the seed of the Myristica fragrans, a tropical, dioecious evergreen tree native to the Moluccas or Spice Islands of Indonesia. Geographical Sources The nutmeg tree, Myristica fragrans, is indigenous to the Moluccas in Indonesia but has been successfully grown in other Asian countries and in the Caribbean, namely Grenada. Banda Islands, Malayan Archipelago, Molucca Islands, and cultivated in Sumatra, French Guiana Composition -> Nutmeg and mace contain 7 to 14 percent essential oil, the principal components of which are pinene, camphene, and dipentene. Nutmeg on expression yields about 24 to 30 percent fixed oil called nutmeg butter, or oil of mace. Dried kernel of the seed. Varieties -> Whole nutmegs are grouped under three broad quality classifications: 1. Sound: nutmegs which are mainly used for grinding and to a lesser extent for oleoresin extraction. High quality or sound whole nutmegs are traded in grades which refer to their size in numbers of nutmegs per pound: 80s, 110s and 130s (110 to 287 nuts per kg), or 'ABCD' which is an assortment of various sizes. 2. Substandard: nutmegs which are used for grinding, oleoresin extraction and essential oil distillation. Substandard nutmegs are traded as 'sound, shrivelled' which in general have a higher volatile oil content than mature sound nutmegs and are used for grinding, oleoresin extraction and oil distillation; and 'BWP' (broken, wormy and punky) which are mainly used for grinding as volatile oil content generally does not exceed 8%. 3. Distilling: poor quality nutmegs used for essential oil distillation.Distilling grades of nutmegs are of poorer quality: 'BIA' or 'ETEZ' with a volatile oil content of 8% to 10%; and 'BSL' or 'AZWI' which has less shell material and a volatile oil content of 12% to 13%. Method of Processing -> When fully mature it splits in two, exposing a crimson-coloured aril, the mace, surrounding a single shiny, brown seed, the nutmeg. The pulp of the fruit may be eaten locally. After collection, the aril-enveloped nutmegs are conveyed to curing areas where the mace is removed, flattened out, and dried. The nutmegs are dried gradually in the sun and turned twice daily over a period of six to eight weeks. During this time the nutmeg shrinks away from its hard seed coat until the kernels rattle in their shells when shaken. The shell is then broken with a wooden truncheon and the nutmegs are picked out. Dried nutmegs are grayish-brown ovals with furrowed surfaces. Large ones may be about 1.2 inches long and 0.8 inch in diameter. Taste and Aroma: Nutmeg has a characteristic, pleasant fragrance and slightly warm taste

Fasteners are the general term of the class of mechanical parts used in fastening two or more parts (or components) into a whole. It is widely used in energy, electronics, electrical appliances, machinery, chemical, metallurgy, mold, hydraulic and other industries, at the same time, in various kinds of machinery, equipment, vehicles, ships, railway, bridge, construction, structure, tools, instruments, chemical, instruments and supplies, you can see all kinds of fasteners, is the most widely used mechanical foundation parts. It is characterized by a wide variety of variety specifications, different performance uses, and a very high degree of standardization, series, and generalization. Therefore, a class of fasteners that already have national standards is called standard fasteners, or simply standard ones.

Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging. Advantages of Sintered NdFeB Magnet : 1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature; 2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet; 3. High cost performance.

AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.

Tomato : Tomato fruit nutrient-rich, with a special flavor. Can be raw food, cooking, processed into tomato sauce, juice or whole fruit cans. The edible parts of tomato are juicy berries. It is a lot of varieties, according to the shape of the fruit can be divided into round, oblong, oblong, pointed round; according to the color of the peel, there are red, pink, orange and yellow The Red tomatoes, fruit color red, generally slightly flat spherical, navel small, flesh, taste sand sweet, juicy and more refreshing, good flavor, raw food, cooked food can also be processed into tomato sauce, tomato juice; pink tomato, fruit powder Red, nearly round spherical, navel small, fruit surface smooth, taste sweet and sour moderate, better quality, yellow tomatoes, fruit orange fruit large, spherical, flesh thick, fleshy and surface and sand, raw food is light, should be cooked food.

We can supply Acetic Acid Industrial Grade and Food Grade. Commodity:Acetic acid. Other name: Glacial acetic acid Molecular formula CH3COOH CAS:64-19-7 EC No.200-580-7 Introduction: Annual capacity of our glacial acetic acid is 350,000.the raw material is methanol.we use a new technical process to produce: Methanol decomposition. the most important characteristic of this way are as following: mild oder; high quality--can reach 99.99%min; low cost--30% lower than oil decomposition and ethanol decomposition way. Specifications: Apha color:

Chemical name:Magnesium nitrate Molecular formula:Mg(NO3)2.6H2O Molecular weight:256.40 Property:soluble in water,liquid ammonia, methanol and ethanol.Stable at room temperature, the relative density of 1.461, higher than the melting point of 95�°C off the water to generate alkaline magnesium nitrate, heated to 300�°C begins to decompose above 400�°C to completely decompose into magnesium oxide and Nitrogen oxide gas. Quality standard: Item Indicator Industrial grade Agriculture grade Magnesium nitrate (Mg(NO3)2.6H2O) â?¥98.0% â?¥98.0% PH value â?¥4 --- Heavy metal â?¤0.002 --- Water insoluble â?¤0.05% â?¤0.1% Iron â?¤0.001% --- Magnesium oxide content(CaO) --- â?¥15% Nitrogen content(N) --- â?¥10.7% Use:Concentrated nitric acid for industrial de-water agent, manufacture of explosives, catalysts and other magnesium salts and nitrates catalyst raw materials, wheat ashing agent.Used in agriculture, magnesium soluble fertilizer for soilless culture. Packing:25/50KGlined with plastic bag and exterior is woven bagPacking or according to customers requirements. 1.Purity 98% white granule 2.Used for fertilizer or industrial material 3.Export Asia/Europe 4.ISO9001

Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12

4-Hydroxybenzoic acid Chemical Name:4-Hydroxybenzoic acid Trade Name:p-oxybenzoic acid Molecular Formula:C7H6O3 Molecular Weight:138.12 CAS No.:99-96-7 Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone, slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46 Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate Specification Item Specification Polymer Grade Technical Grade Appearance white crystal powder white crystal powder Purity(on dry base) % 99.6 99.0 Melting Point 214-217 212-216 Odor odorless odorless Solubility Clear and transparent clear and transparent Loss on Drying % 0.20 0.50 Color(Pt-Co) 10 40 Ash % 0.02 0.15 Sulfate(SO42-) 0.01 0.05 Chloride(Cl-) % 0.005 0.02 Phe% 0.01 0.10 Salicylic Acid % 0.02 0.10 4-Hydroxyisophthalic Acid(HIPA) ppm 500 / Insolubles in Metha ppm 50 / Potassium(K+) ppm 5 / Sodium (Na+) ppm 5 / Iron (Fe) ppm 5 / Ca2++Mg2+ppm 5 /

Commodity: Potassium Permanganate Molecular formula:KMnO4 Molecule Weight:158.03 CAS:7722-64-7 EINECS:231-760-3 UN 1490 Hazard Class: 5.1 Physical State: Needle-like lustrous and dark purple crystal. It can dissolve in water, and it is a strong oxidant. Melting Point :270 C ,decompound Specific Gravity :2.703 ,Solubility in water :6.4 g/100 mL (20C) ,Stability :Stable under ordinary conditions Use Mainly used in medical industry, water treatment, metallurgical industry, chemical industry and food industry. Quality Standard Item Standard BP2000 Appearance purple noodle crystal Purity 99.3% min Chloride 0.01% max Sulfate 0.05% max Insoluble matter in water 0.15% max Moisture 0.5% max As 20 ppm max Cd 50 ppm max Cr 50 ppm max Hg 10 ppm max Pb 50 ppm max Se 50 ppm max Ni 50 ppm max Sb 50 ppm max Packing and Storage Packing: 50kg net weight new galvanized drums with P.E. Liner. Stored in a cool, ventilated, dry place.

2-Naphthol Basic information Chemical Properties Application Preparation Product Name: 2-Naphthol Synonyms: c.i.37500;c.i.azoiccouplingcomponent1;c.i.developer5;Developer A;Developer AMS;Developer BN;developera;developerams CAS: 135-19-3 MF: C10H8O MW: 144.17 EINECS: 205-182-7 Product Categories: Fluorescent;Naphthalene;pigments;alcohol;MICROCIDIN;Color Former & Related Compounds;Developer;Functional Materials;Intermediates;Aromatic Compounds;Alphabetical;Bioactive Small Molecules;Biochemicals and Reagents;Building Blocks;C9 to C20+;Cell Biology;Chemical Synthesis;Fluorescent Indicators and Probes;Fluorescent Probes;Labels;N;Organic Building Blocks;Oxygen Compounds;Particles and Stains;pH Sensitive Probes and Indicators;Phenols;Dyestuff Intermediates;Aromatics Mol File: 135-19-3.mol 2-Naphthol Chemical Properties Melting point 120-122 C(lit.) Boiling point 285-286 C(lit.) density 1,28 g/cm3 vapor density 4.97 (vs air) vapor pressure 10 mm Hg ( 145.5 C) refractive index 1.5762 (estimate) Fp 153 C storage temp. Refrigerator solubility methanol: soluble1g/10 mL, clear, colorless to light yellow pka 9.51(at 25C) form Powder, Crystals or Granules color White PH Range Non& uorescence (8.5) to blue & uorescence (9.5) Water Solubility 1 g/L (20 C) �»max 226nm, 265nm, 275nm, 286nm, 320nm, 331nm Merck 14,6384 BRN 742134 Stability: Stable. Combustible. Dust may form explosive mixture with air. Incompatible with strong oxidizing agents, phenol. Major Application Display device, semiconductors, photoimaging materials, inks, toner, chalk, security paper, molding materials, tin plating method, rubber, adhesive, leather, detergent, hair dyes, antimitotic drug, anticancer agent, antiinflammatory agent, treatment of acne vulgaris (pimples) and other dermal ailments (rashes, scratches, blemishes, hair loss), disorders InChIKey JWAZRIHNYRIHIV-UHFFFAOYSA-N CAS DataBase Reference 135-19-3(CAS DataBase Reference) NIST Chemistry Reference 2-Naphthalenol(135-19-3) EPA Substance Registry System 2-Naphthalenol (135-19-3) Safety Information Hazard Codes Xn,N Risk Statements 20/22-50 Safety Statements 24/25-61 RIDADR UN 3077 9/PG 3 WGK Germany 2 RTECS QL2975000 F 8 Autoignition Temperature 430 C TSCA Yes HazardClass 9 PackingGroup III HS Code 29071590 Hazardous Substances Data 135-19-3(Hazardous Substances Data) Toxicity LD50 orally in Rabbit: 1960 mg/kg LD50 dermal Rabbit > 10000 mg/kg 2-Naphthol Usage And Synthesis 2-Naphthol Preparation Products And Raw materials

Handmade Customized 108 Beads MalaNecklace with Natural 8mm Lapis Lazuli Gemstone Guru Bead German Silver HandKnotted Mala Comes with unbreakable finishing Materials Used 8mm Natural 108 Lapis Lazuli Beads Guru Bead German Silver Bead Length 1820 inches End Work Length 34 Inches Thread color Navy Blue Any color of threads is available Any kind of Customization is available Chakra of Stone Used Blue Tiger Eye Throat Chakra Third Eye Chakra

SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.

TYPES 1 Cement 42.5 N CEM II/A-L Bulk 2 Cement 42.5 R CEM II/A-L Bulk 3 Cement 42.5 N CEM II/A-L Big Bag 1.5MT 4 Cement 42.5 R CEM II/A-L Big Bag 1.5MT 5 Cement 42.5 N CEM II/A-L NA 442 Bag 50Kg BUNDLED 2,2 MT per pallet 6 Cement 42.5 N CEM II/A-L NA 442 Bag 25kg BUNDLED 2,15 MT per pallet 7 Cement 42.5 N-LH/SR5 CEM I Bulk 8 Cement 42.5 N-LH/SR5 CEM I Bag 9 Cement 52.5 CEM I Bulk 10 Cement 52.5 CEM I Bag Below present our general procedures for the purchase and sale of sugar of Brazilian origin: 1- Buyer issues a Letter of Intention (LOI) addressed to Seller; 2- Seller issues a Soft Corporate Offer (SCO); 3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller; 4- Seller issues Full Corporate Offer (FCO); 5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller; 6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented; 7- SPA is signed by Seller and Buyer; 8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank; 9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC); 10- Seller issues Performance Bond (PB) 2%; 11- Seller prepares the product and export documents; 12- Buyer receives the export documents by mail; 13- Buyer makes payment 100% to Seller ´s Bank through transfer bank (Swift Message MT-103); 14- Shipping; 15- Seller sends the original export documents to Buyer; Please contact for full specs on quantities, delivery terms, etc... NOTES: The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.

CHEMICAL COMPOSITION ELEMENTS CaO% MgO% SiO2% Al2O3% TFe% MnO% Cr2O3% P2O5% S% MIN 24.00 3.50 10.00 2.00 11.00 0.02 0.00 0.02 0.05 MAX 49.00 25.00 28.00 12.00 36.00 2.50 0.80 0.42 0.20 TYPICAL 39.20 12.20 16.80 4.60 21.70 1.25 0.12 0.28 0.12 PHYSICAL APPEARANCE ASPECT Agglomerate materials COLOR Gray blackish color CHEMICAL BEHAVIOR The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys. Below present our general procedures for the purchase and sale of sugar of Brazilian origin: 1- Buyer issues a Letter of Intention (LOI) addressed to Seller; 2- Seller issues a Soft Corporate Offer (SCO); 3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller; 4- Seller issues Full Corporate Offer (FCO); 5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller; 6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented; 7- SPA is signed by Seller and Buyer; 8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank; 9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC); 10- Seller issues Performance Bond (PB) 2%; 11- Seller prepares the product and export documents; 12- Buyer receives the export documents by mail; 13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103); 14- Shipping; 15- Seller sends the original export documents to Buyer; NOTES: The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.

CHEMICAL PROPERTIES SIZING PROPERTIES P2O5 30 30.2 % 200 60.05 % CO2 6.00 6.30 % 160 18.99 % SO3 2.50 3.00 % 125 13.72 % CaO 50.00 51.00 % 100 4.30 % MgO 0.75 1.00 % 80 1.16 % Fe2O3 0.30 0.40 %

CHEMICAL PROPERTIES SIZING PROPERTIES P2O5 29.00 29.70 % 200 72.83 % CO2 7.2 -7.8 % 160 13.77 % SO3 2.50 - 3.00 % 125 6.58 % CaO 48.30 49.00 % 100 2.21 % MgO 1.10 1.50 % 80 3.11 % Fe2O3 0.35 0.40 %