L Malic Acid E296 Cas No 97 67 6 Suppliers and Manufacturers

Name: 2-hydroxy-6-naphthoic acid Alias: 2,6 acid; 2-naphthol-6-carboxylic acid; 6-hydroxy-2-naphthoic acid; 6-hydroxy-2-naphthoic acid CAS NOï¼?16712-64-4 Molecular formula: c11h7o3 Molecular weight: 187.172 Product quality standard: Appearance characte Light yellow powder Content 99% 2-naphtholâ?¤0.10% 2,3-acidâ?¤0.10% melting point243-245�°C Loss on dryingâ?¤0.30% heavy metalâ?¤20ppm Application: used in medicine, liquid crystal, paint, etc. Packing: 25kg / cardboard barrel, or according to customer requirements

Kiwi : The world's largest consumption of the first 26 kinds of fruit, kiwi is the most comprehensive. The content of Vc, Mg and trace elements in kiwifruit fruit was the highest. Among the top three low-sodium and high-potassium fruits, kiwi is at the top of the list because it contains more potassium than bananas and citrus. At the same time, the content of Ve and Vk in kiwifruit was determined to be excellent, low in fat and no cholesterol. According to the analysis, kiwi fruit vitamin content per 100 grams of fresh samples in general 100-200 mg, high up to 400 mg, about 5-10 times the citrus; sugar 8-14%, acid 1.4-2- 0%, but also with tyrosine and other amino acids 12 species. kiwi fruit contains a wide range of nutrients, most of the fruit is rich in one or two nutrients, but each kiwi can provide 8% DV folic acid, 8% DV copper, 8% pantothenic acid, 6% Fresh, 4% DV iron and vitamin B6, 2% DV phosphorus and Va as well as other vitamins and minerals. Kiwi in addition to kiwi alkali, proteolytic enzymes, tannin pectin and sugar and other organic matter, as well as calcium, potassium, selenium, zinc, germanium and other trace elements and the human body needs 17 kinds of amino acids, but also rich in vitamins, , Fructose, citric acid, malic acid, fat. A kiwi can provide a day more than twice the demand for vitamin C, known as the "king of fruit." Kiwi also contains good soluble dietary fiber, as the fruit of the most eye-catching place is contained in its superior antioxidant properties of plant chemical substances sod, according to the US Department of Agriculture research report, kiwi comprehensive antioxidant index in the Fruits among the top, second only to the thorns, blueberries and other small fruit, far stronger than apples, pears, watermelon, citrus and other daily fruits. And blueberries belong to the second generation of fruit is quite representative. Compared with sweet orange and lemon, kiwi fruit contains vitamin C ingredients are two times the first two fruits, so often used to fight against scurvy. Not only that, kiwi can stabilize mood, lower cholesterol, help digestion, prevent constipation, as well as thirst and diuretic and protect the role of the heart.

Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant. General Information Product Name Potassium Monopersulfate compound CAS 70693-62-8 Chemical formula 2KHSO5 KHSO4 K2SO4 Molecular weight 614.7 Specification Appearance White, free flowing granule Available Oxygen, % 4.5 KHSO5,  % 42.8 Loss on Drying  % 0.15 Bulk Density, g/L 0.80 pH (10g/L,25 C) 2.0 .4 Sieve Residue on 75 m test sieve, % 90.0 Packaging Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements. Storage Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.

Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12

Shubhlaxmi Industries are manufacturer and exporter of Cardamom Seeds that are enriched with quality and goodness. We have always made sure that we meet international standards in terms of quality and purity. Green Cardamom is botanically known as Elettaria Cardamomum Maton and it belongs to family Zingiberacea. These are small blackish seeds enclosed in green pods. It has great flavor. They have scented property. The aroma is very pleasant and has a rich taste. Cardamom seeds are widely used in making tea masala. It is used in making Arabian welcome drink. Whole pods are used in making pulao and curries to make it aromatic. Cardamom powder is sprinkled over Indian sweets to make it taste better and look good. Cardamom is great in stimulating digestive system and controlling stomach acidity. It controls bad breathe. It has a remedial action against cough and bronchitis. Cardamom is known as queen of Indian spices. Specification HS Code : 09083190 Type & Variety : 6-7mm,7-8mm,8mm Ageb, Agb, Ags Variety ; Natural Green, Black, Split Pods Color : Deep Green, Fast Green, Black Moisture ; 9% Max Density G/l : 435g/l ,415 G/l ,385 G/l Immatured Seeds : 5% By Count Thrips : Nil Or 3 By Count Origin : Kerala,tamilnadu,karnataka,w.bengal Packing : 5/15/25/50 Kg Net Pp Bag/ Jute Bag/ Cartoon Quality Assurance : Sgs,geo-chem, Bureau Veritas Loading Capacity : 12mt In 20'fcl & 25mt In 40'fcl

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Features (%) Purity - 97 minimum Moisture - 10-12 maximum Total Ash - 4-6% Acid Insoluble residue - 0.4% maximum Starch - Negative Tanning Bearing gum - Negative Salmonella - Negative EColi - Negative Gum Arabic is used in printing, paint production, glue, cosmetics and various industrial applications, including viscosity control in inks and in textile industries. Gum Arabic is a complex mixture of polysaccharides and glycoproteins that is used primarily in the food industry as a stabilizer.

Features (%) Purity - 97 minimum Moisture - 10-12 maximum Total Ash - 4-6% Acid Insoluble residue - 0.4% maximum Starch - Negative Tanning Bearing gum - Negative Salmonella Negative EColi Negative Gum Arabic is used in printing, paint production, glue, cosmetics and various industrial applications, including viscosity control in inks and in textile industries. Gum Arabic is a complex mixture of polysaccharides and glycoproteins that is used primarily in the food industry as a stabilizer.

Name - Choline Chloride Other name - Vitamin B4 CAS No. - 67-48-1 MF - C5H14CINO Grade - Food Grade Function - Health care Purity - > 98% Color - White Powder Choline may be helpful in strengthening the liver and also in assisting the treatment of cholesterol buildup, memory loss, and alzheimer's. How important is Choline. A deficiency of choline may contribute to liver degeneration and hardening of the arteries. Choline isn't technically a B vitamin, but it is often included in the B-vitamin family because it does work closely with other B vitamins, especially folic acid (Vitamin B9) and cobalamin (Vitamin B12), to process fat and keep the heart and brain healthy. Choline is also needed for gallbladder and liver function, lecithin formation, hormone production, and regulate the central nervous system,.

Brix - 28-30% Technics - Cold break Ingredients - 100% fresh tomatoes Lycopene - 50mg/100g Min Viscosity - 6-11cm/30sec Colour A/B - 2.1 Min L value - 22.5 min PH - 4.0-4.4 Total acid - 9% HMC - 40% Sugar ratio - >42 dry residue Shelf life - 24 months from production date

Chemical Results: Results: Moisture (%) 3.9 Milk Fat ((%) 26 Ash (%) 7.0 Protein (dry basis %) 100 Lactose (%) 55.2 UDWPN (mg/g) 2.4 Insolubility Index (mL) 1.0 Acidity (%) 0.10 Bulk Density (g/mL) 0.685 Scorched Particles Standard A pH (50 g/l water at 20 Degrees C) 6.59 Micro Results: Results: Antibiotics Negative Phosphatase (ug/ml) < 6 Salmonella (per 375 g) Not Detected Coliforms (per 0.1g @ 30 Degrees C) Absent Standard Plate Count < 5,000 Moulds (per g) < 10 Yeast (per g) < 10 Thermophilic Bacteria (per g) 150 Thermophilic Spores (per g) < 10 Mesophilic Spores (per g) 60 Thermoduric Bacteria (per g) 250

Chemical Results: Results: Moisture (%) 3.9 Milk Fat ((%) 26 Ash (%) 7.0 Protein (dry basis %) 100 Lactose (%) 55.2 UDWPN (mg/g) 2.4 Insolubility Index (mL) 1.0 Acidity (%) 0.10 Bulk Density (g/mL) 0.685 Scorched Particles Standard A pH (50 g/l water at 20 Degrees C) 6.59 Micro Results: Results: Antibiotics Negative Phosphatase (ug/ml) < 6 Salmonella (per 375 g) Not Detected Coliforms (per 0.1g @ 30 Degrees C) Absent Standard Plate Count < 5,000 Moulds (per g) < 10 Yeast (per g) < 10 Thermophilic Bacteria (per g) 150 Thermophilic Spores (per g) < 10 Mesophilic Spores (per g) 60 Thermoduric Bacteria (per g) 250

Product name: allantoin INCI Name: ALLANTOIN Molecular Formula: C4H6N4O3 Molecular Weight: 158.12 Appearance: White powder Purity: 98% CAS NO.: 97-59-6 EINECS No.: 202-592-8 Supplier: ZHENYIBIO Allantoin powder has anti-inflammatory and analgesic effects.Allantoin in cosmetics used as a skin protectant and anti-irritant,and can reduce skin irritation caused by cosmetic ingredients.It is listed as the first class of effective active ingredients for skin care agents and is now widely used in many products,such as shampoos,sunscreen products,creams and lotions,shaving creams and oral care products.Allantoin for skin to have healing,calming and soothing effects,and Allantoin serum can also help protect the skin from harmful external factors (such as wind burns).Allantoin is considered an excellent temporary anti-irritant and is believed to stimulate the growth of new tissues and help heal damaged skin.Allantoin for skin whitening is suitable for sensitive,inflamed and acne skin.

Description of Formic Acid Popular Name: Methanoic acid or Formic acid Formula: HCOOH CAS NO.: 64-18-6 Dangerous Goods Class: 8 Classification: Carboxylic acid Molecular Structure: HCOOH Appearance: clear & transparent liquid Packange of Formic Acid 25kg/35kg/250kg/1200kgs IBC drums, ISO tank Usage Formic Acid 85% widely used in pharmaceutical industry, leather industry, printing and dyeing industry, chemical industry, rubber industry, steel industry, paper industry, pesticide industry, food industry, poultry industry etc.

Allantoin is a non-toxic, odorless, non-irritating, non-allergic white crystalline powder, soluble in hot water, hot alcohol and diluted sodium hydroxide solution, slightly soluble in water and alcohol, insoluble in ether and chloroform. An organic solvent; a saturated aqueous solution (concentration of 0.6%) which is slightly acidic. Allantoin has a physiological function of promoting cell growth, promoting wound healing, softening the stratum corneum protein, and restoring the skin or tissue. It is a good skin wound healing agent and can be used to relieve skin dryness, scaly skin disorders, wounds and ulcers. External skin medication Allantoin can promote the water absorption capacity of the outermost tissues of skin and hair, prevent the water from dispersing, and make the skin soft, lustrous and elastic, so that the hair does not split or break. Can be used as a formula cream, lotion, facial cleanser, hair lotion, hair restorer, sunscreen, lipstick, shaving cream, hemorrhoid cream, oral cavity.