MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
Mace Botanical: Myristica fragrans Family: N.O. Myristicaceae Hindi Name: Mace - Javitri General Description: Nutmeg, spice consisting of the seed of the Myristica fragrans, a tropical, dioecious evergreen tree native to the Moluccas or Spice Islands of Indonesia. Geographical Sources The nutmeg tree, Myristica fragrans, is indigenous to the Moluccas in Indonesia but has been successfully grown in other Asian countries and in the Caribbean, namely Grenada. Banda Islands, Malayan Archipelago, Molucca Islands, and cultivated in Sumatra, French Guiana Composition -> Nutmeg and mace contain 7 to 14 percent essential oil, the principal components of which are pinene, camphene, and dipentene. Nutmeg on expression yields about 24 to 30 percent fixed oil called nutmeg butter, or oil of mace. Dried kernel of the seed. Varieties -> Whole nutmegs are grouped under three broad quality classifications: 1. Sound: nutmegs which are mainly used for grinding and to a lesser extent for oleoresin extraction. High quality or sound whole nutmegs are traded in grades which refer to their size in numbers of nutmegs per pound: 80s, 110s and 130s (110 to 287 nuts per kg), or 'ABCD' which is an assortment of various sizes. 2. Substandard: nutmegs which are used for grinding, oleoresin extraction and essential oil distillation. Substandard nutmegs are traded as 'sound, shrivelled' which in general have a higher volatile oil content than mature sound nutmegs and are used for grinding, oleoresin extraction and oil distillation; and 'BWP' (broken, wormy and punky) which are mainly used for grinding as volatile oil content generally does not exceed 8%. 3. Distilling: poor quality nutmegs used for essential oil distillation.Distilling grades of nutmegs are of poorer quality: 'BIA' or 'ETEZ' with a volatile oil content of 8% to 10%; and 'BSL' or 'AZWI' which has less shell material and a volatile oil content of 12% to 13%. Method of Processing -> When fully mature it splits in two, exposing a crimson-coloured aril, the mace, surrounding a single shiny, brown seed, the nutmeg. The pulp of the fruit may be eaten locally. After collection, the aril-enveloped nutmegs are conveyed to curing areas where the mace is removed, flattened out, and dried. The nutmegs are dried gradually in the sun and turned twice daily over a period of six to eight weeks. During this time the nutmeg shrinks away from its hard seed coat until the kernels rattle in their shells when shaken. The shell is then broken with a wooden truncheon and the nutmegs are picked out. Dried nutmegs are grayish-brown ovals with furrowed surfaces. Large ones may be about 1.2 inches long and 0.8 inch in diameter. Taste and Aroma: Nutmeg has a characteristic, pleasant fragrance and slightly warm taste
IV Extension Set 7 Inch Tubing 0.24 mL Priming Volume UOM: 50/CS Product Number: MC33150 Manufacturer: ICU Medical
Tehbotol Sosro. Available Variants: 1. Tehbotol Sosro Glass Bottle (1 Box = 24 x 220 ml) 2. Tehbotol Sosro PET 450 ml (1 Box = 24 x 450 ml) 3. Tehbotol Sosro PET 350 ml (1 Box = 12 x 350 ml) 4. Tehbotol Sosro Pouch 230 ml (1 Box = 24 x 230 ml) 5. Tehbotol Sosro Tetra Pak 200 ml (1 Box = 24 x 200 ml) 6. Tehbotol Sosro Tetra Pak 250 ml (1 Box = 24 x 250 ml) 7. Tehbotol Sosro Tetra Pak 330 ml (1 Box = 24 x 330 ml) 8. Tehbotol Sosro Tetra Pak 1000 ml (1 Box = 12 x 1000 ml) Shelf Life = 9 Months Port of Loading = Semarang, Indonesia
Pokka Tea PET Bottle. 1 Box = 24 bottle Shelf Life = 12 months Port of Loading: Semarang, Indonesia Note: We can arrange sticker pasting for additional labeling information if needed. Available Variants: 1. Pokka Mango Tea 450 ml 2. Pokka Lemon Black Tea 450 ml 3. Pokka Lychee Tea 450 ml 4. Pokka Lychee Tea 350 ml 5. Pokka Oolong 450 ml 6. Pokka Natsbee Honey Lemon 450 ml 7. Pokka Jasmine Green Tea 450 ml 8. Pokka Lemon Black Tea 350 ml 9. Pokka Jasmine Green Tea 300 ml 10. Pokka Japanese Green Tea 300 ml (can) 11. Pokka Vanilla Tea 350 ml 12. Pokka Chinese Oolong Tea 300 ml (can)
Pokka Flavor Tea. Available Variants: 1. Pokka Mango Tea 450 ml 2. Pokka Lemon Black Tea 450 ml 3. Pokka Lychee Tea 450 ml 4. Pokka Lychee Tea 350 ml 5. Pokka Oolong 450 ml 6. Pokka Natsbee Honey Lemon 450 ml 7. Pokka Jasmine Green Tea 450 ml 8. Pokka Lemon Black Tea 350 ml 9. Pokka Jasmine Green Tea 300 ml 10. Pokka Japanese Green Tea 300 ml (can) 11. Pokka Vanilla Tea 350 ml 12. Pokka Chinese Oolong Tea 300 ml (can) Manufactured in Indonesia 1 Box = 24 bottles Shipping from Semarang, Indonesia
2-Naphthol Basic information Chemical Properties Application Preparation Product Name: 2-Naphthol Synonyms: c.i.37500;c.i.azoiccouplingcomponent1;c.i.developer5;Developer A;Developer AMS;Developer BN;developera;developerams CAS: 135-19-3 MF: C10H8O MW: 144.17 EINECS: 205-182-7 Product Categories: Fluorescent;Naphthalene;pigments;alcohol;MICROCIDIN;Color Former & Related Compounds;Developer;Functional Materials;Intermediates;Aromatic Compounds;Alphabetical;Bioactive Small Molecules;Biochemicals and Reagents;Building Blocks;C9 to C20+;Cell Biology;Chemical Synthesis;Fluorescent Indicators and Probes;Fluorescent Probes;Labels;N;Organic Building Blocks;Oxygen Compounds;Particles and Stains;pH Sensitive Probes and Indicators;Phenols;Dyestuff Intermediates;Aromatics Mol File: 135-19-3.mol 2-Naphthol Chemical Properties Melting point 120-122 C(lit.) Boiling point 285-286 C(lit.) density 1,28 g/cm3 vapor density 4.97 (vs air) vapor pressure 10 mm Hg ( 145.5 C) refractive index 1.5762 (estimate) Fp 153 C storage temp. Refrigerator solubility methanol: soluble1g/10 mL, clear, colorless to light yellow pka 9.51(at 25C) form Powder, Crystals or Granules color White PH Range Non& uorescence (8.5) to blue & uorescence (9.5) Water Solubility 1 g/L (20 C) �»max 226nm, 265nm, 275nm, 286nm, 320nm, 331nm Merck 14,6384 BRN 742134 Stability: Stable. Combustible. Dust may form explosive mixture with air. Incompatible with strong oxidizing agents, phenol. Major Application Display device, semiconductors, photoimaging materials, inks, toner, chalk, security paper, molding materials, tin plating method, rubber, adhesive, leather, detergent, hair dyes, antimitotic drug, anticancer agent, antiinflammatory agent, treatment of acne vulgaris (pimples) and other dermal ailments (rashes, scratches, blemishes, hair loss), disorders InChIKey JWAZRIHNYRIHIV-UHFFFAOYSA-N CAS DataBase Reference 135-19-3(CAS DataBase Reference) NIST Chemistry Reference 2-Naphthalenol(135-19-3) EPA Substance Registry System 2-Naphthalenol (135-19-3) Safety Information Hazard Codes Xn,N Risk Statements 20/22-50 Safety Statements 24/25-61 RIDADR UN 3077 9/PG 3 WGK Germany 2 RTECS QL2975000 F 8 Autoignition Temperature 430 C TSCA Yes HazardClass 9 PackingGroup III HS Code 29071590 Hazardous Substances Data 135-19-3(Hazardous Substances Data) Toxicity LD50 orally in Rabbit: 1960 mg/kg LD50 dermal Rabbit > 10000 mg/kg 2-Naphthol Usage And Synthesis 2-Naphthol Preparation Products And Raw materials
Tumi Ishi blocks are small chunks of wood, cut kind of like a gemstone. Basically the idea is you are supposed to stack them all up. Tumi ishi Wood Balancing Stones for Baby is a new take on the classic wooden building block. Unlike standard square blocks, these blocks have many sides making them more challenging to stack Type: Block Set, Other Classic Toys Material: Wood Size: 3-6cm Color: Natural color Logo: Customized Logo Age Range: 0 to 24 Months, 2 to 4 Years, 5 to 7 years, 8 to 13 Years,... Usage: Relaxing, Educate, Simulate brain development for kids Packing: Bag/carton
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
IV Extension Set 16 Inch Tubing 5.1 mL Priming Volume DEHP-Free UOM: 48/CS Product Number: 2H8671 Manufacturer: Baxter
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Technical Data Sheet Of Accoset-50 ALUMINA MORTAR (Test Certificate) General Properties A. Max service temperature - 1500 oC B. Maximum grain size - 0 - 1.5 mm C. Water required for mixing - 22 - 30% D. Setting - Airsetting E. Sintering Temp - 1550 oC Chemical Properties A. Al2O3 - 50.00% B. SiO2 - 31.00% c. Fe2O3 - 5.00% D. LOI - 7.00% Physical Properties A. Dry Density - kg / m3 B. CCS - 17 kg / cm2 after drying at 110C / 24 hr C. MOR - 20 kg / cm2 at 110 oC/ 24 hr 18 kg/cm2 at 800 C/ 3 hr Thermal Properties - A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC Packaging - 25 - 50 kg bags Storage Life - 12 months Delivery State - Dry
Iv cannulas, syringes, infusion set, rapid malaria test, rapid typhoid test, bp machine, thermometer, latex foley catheter, surgical gown, ppe kit, latex gloves, vaucum drying oven, fume hood (ms/ss), ducted pp fume hood, biological safety cabinet(as per class 2nd), air shower, pass box, bod incubator, incubator shaker, mini dry bath incubator, electronic burette, co2 incubator, seed germinator refrigerated, ceramic magnetic stirrer hot plate, ultrasonic cleaner, autoclave vertical/horizontal, ice flake machine, tube furnace, elisa reader/microplate reader, microplate washer, ultrasonic homogenizer, deep freezer ( 10 c to 40 c), water baths, ph meter, flammable cabinet, heating mental, table top autoclave class b series, semi auto chemistry analyzer, pcr machine, refrigerated chiller, nucleic acid extraction system, mb 6900 plus, mb 1660, mb 2000, mb 2100, high speed table top refrigerated centrifuge, laboratory furniture, lab equipments and devices, herbal extracts, extracts etc..
IV Extension Set ICU 7 Inch Tubing Without Ports 29 mL Priming Volume UOM: 50/CS Product Number: 12517-01 Manufacturer: ICU Medical
Our Company is a well-known name in the industry we are engaged in offering the best quality� Alfalfa Hay Bales. Our offered products are prepared using the latest technologies. These products are offered at very affordable rates. The size is (16 x 27 x 32 inch), wherein the approximate bale weight of each bale will be 50 Kgs. Technical Specification: Protein: 16% to 22% Fat: 1.5% to 2.5% Fibre: 24% to 32% Ash: 2.5% to 6% Moisture: 10% to 12% As in reference to the supply of Alfalfa Hay, we would like to share following details related to same: Alfalfa Haying Process is done through Sun Drying Process, which is called Sun Curing Process. The haying process is totally manual and labour intensive process. The dry matter recovery is variable in nature. The dry matter means the hay residue of the same The pricing will fluctuate based on the dry matter recovery. The baling is done with a static baler in fixed size. During the sun curing process, the green pigments are lost. Which is a direct loss of Vitamin AD3. In order to avoid the loss of green pigmentation and core vitamin value of the forage, two-stage haying is executed by HAF�®. Stage One is direct sun curing and in Stage two passive sun curing is done in Net House. During the second stage of sun curing, high water content forage on drying process turns to Bottle Green Colour (which visually looks blackish green). Sometimes lump formation is evident in hay bales and its because the hay in post sun curing process reaches to Moisture level around 6% or 7 %. During the baling process, a mild spray of saline water is applied to the hay (which adds 0.34% Moisture). That enables the appropriate binding process of � the double-compressed bales. The usage of saline water (instead of regular water) for spraying prevents the microbial and toxin growth in the hay. Internationally accepted standard of Moisture in hay is 17%, whereas our hay has Moisture not above 9% in total. The shelf life of the HAF Alfalfa Hay is 30 Months and its all because of its meticulous processing methodology The bales must not come in direct sun light. Due to Photosensitivity, the green leafy material may loose green pigments. The standard weight of the Bale will be 45 Kgs or 50 Kgs, depending on the volume of the dry hay.