Hydraulic mill roll stand Specification Symmetrical structure can install two rolls of paper at the same time and continually change paper, paper roller clamp, lift-lower, loosen, movement, contraposition, translation etc. Equipment was made of HT200-wide casting. Maximum loading of one side arm 1500-2000kg Each stand with two set track and trolley for carry paper. Pneumatic braking Electrical components are controlled centralized(domestic brank) One set main motor power of hydraulic mill roll stand is 2kw, each arm power 1.5*4kw YIKE GROUP Hydraulic mill roll stand Advantage Shaftless mill roll stand Two arms, feeding paper quickly Pneumatic brake Operated by motorize Shaftless mill roll stand
Technical parameter: *Movement of raw paper stand: hydraulic control *Expiry width: 800-1800mm *Diameter of reel paper: 350-1500mm *Maximum side weight: 3000kgs *Main shaft of mill roll stand: ¦µ210mm *Air source pressure: 0.6-0.9mpa *Total power: 5.5kw *Work power: 380v 50hz total power:5.5kw *Size: 3850¡á1600¡á1650£¨l¡áw¡áh£© Hydraulic system parameter: *Work pressure: 12£16 mpa *Work range of hydraulic cylinder(jigging motion): ¦µ100mm¡á460mm *Dia of hydraulic cylinder(clamp): ¦µ63mm¡á720mm *Motor power of hydraulic station: 5.5kw continuous work *Electromagnetic valve work voltage of hydraulic station: 220v 50hz Design features: *Double rollers with four arms: carry two reel papers at the same time, no stop for replacing reel paper *Hydraulic control of lifting£¬lowering£¬clamping, loosen and centering *Pneumatic control of reel paper tension *The finial adopts taper style. *Reel strain control by manual brakes or pneumatic brakes, also can control together with paper splicer.
MJRS-1 Hydraulic Mill Roll Stand 1) The sturcture is double rotary shafts with four arms; Support two paper mill rolls on both arms at the same time. 2) Hydraulic control for paper mill roller up-down, clamp-open and centering. Or motorized clamp-open and centering. 3) Using multi-point brake which imports from Italy and automatic expansion springiness chucks , Reduce paper waste. 4) Effective width:1400mm-2800mm. 5) Maximum paper roll diameter:¦Õ1500mm. 6) Maximum support weight: 7T. 7) Main axis:¦Õ270mm HS CODE: 844180900
Hydraulic shaftless mill roll stand Spindle 240mm, hyperbolic heavy rocker, expand chuck, multi-point brake, hydraulic drive lifting, panning left and right on the middle. Hydraulic mill roll stand Specification The symmetrical structure can install two rolls of paper at the same time and continually change paper, paper roller clamp, lift-lower, loosen, movement, contraposition, translation etc. Equipment was made of HT200-wide casting. Maximum loading of one side arm 1500-2000kg Each stand with two set track and trolley for carry paper. Pneumatic braking Electrical components are controlled centralized(domestic brank) One set main motor power of hydraulic mill roll stand is 2kw, each arm power 1.5*4kw YIKE GROUP Hydraulic mill roll stand Advantage Hydraulic mill roll stand characteristic Professional manufacturer Economic cost Durable working Fast delivery Good after service Structural features 1.Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and othersï¼?the lifting of the paper adopts hydraulic drive. 2.Brake adjustable adopts multipoint braking system. 3.Each paper rack is equipped with two paper carts that can be served simultaneously from both sides. IIã??Technical parameter 1ã??Paper clip range maximum : 1800mm minimum : 1000mm 2 Folder diameter maximum : 1500mm minimum : 350mm 3 Main shaft diameter of paper holder 240mm 4 Gas source work pressure Mpa 0.4---0.8Mpa III Hydraulic system parameters 1 Work pressure Mpa :16---18Mpa 2 Lifting hydraulic cylinder 10 440mm 3 Clamping hydraulic cylinder 63 1300m 4 Hydraulic station motor power 3KW --380V -- 50Hz Solenoid valve voltage 220V 50 Hz
Product Description: 1, The sturcture is double rotary shafts with four arms; Support two paper mill rolls on both arms at the same time. 2, Hydraulic control for paper mill roller up-down, clamp-open and centering. 3, Web tension is controlled by pneumatic brake or manual brake; Toothed chucks are optional. 4, Effective width: 1200mm-2800mm; Maximum paper roll diameter:¢1500mm. 5, Maximum support weight: V5B: 2.5T, V6B:3.5T. 6, Main axis: 242mm / 270mm.
The sturcture is double rolls with four arms;mill rolls on both arms can be bearing at the same time. Hydraulic control of lifting, lowering, clamping and centering. Web tension is controlled by pneumatic or magnetic-powder tension control;expandable chucks is optional. Maximum weight:3t Notice:the machine has favourable fob price.Please write your detailed contactments in the inquire if you contact me. I can't see your contactments directly because i am a free member. Thank you. My email is xuewanting(at)fs-pack.Com
Purpose and Characteristics: 1. The structure is double rotary shaft with four arms; Support two paper mill rolls on both arms at the same time. 2. Round-plate type manual brake, the web tension is adjusted at any time. 3. Arm Clamp and rotary structure set fixed torque clutch, operate safety. 4. Maximum paper roll diameter:¦Õ1400mm. 5. Maximum support weight: 2T.
Daikin Hydraulic Pump PV22 Brand new Made in Japan Quantity 110pcs
Electric mill roll stand is Symmetrical structure, can carry two craft paper at one time, which can work without brake.Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic pressure. 1. 1- Electric mill roll stand 2-cast steel material 3-single point pnumatic break 2. Equiped with uniform torsion clutch, safe, easy and reliable operation. 3. The structure is symmetrical, can load two rolls raw paper at the same time, can change the paper roll without stop the machine.
Hydraulic Bottle Jack
We make customized rolling, sliding gates, collapsible gates for home, commercial building factories etc. These gates come in Aluminum, Stainless Steel or in Steel. The surface is powder coated to last many years after installation. These gates can be installed on tracks or without tracks. Every aspect of the gates can be customized. These gates are easy to operate with minimal effort. Our standard dimensions Height 1600mm (height can customized) Stretching ratio: 1:0.17 + 0.42 (can be customized) Gate Minimum length :2 Meters Gate Maximum length: upto 90 meters ( double Gates) Operation: Hand operated, Motorized. Colors available: Blue, Red (colors can be customized) Please contact us for competitive pricing.
Description: Hydraulic Mill Roll Stand//Corrugated Cardboard Mill Roll Stand/Paperboard Mill Roll Stand: Symmetrical structure, can carry two craft paper at one time, which can work without brake. Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic pressure. feeding craft / reel paper quickly. Function Of Mill Roll Stand: Each arm setup four directions button, it is easy to operate It can be loading two paper rolls at the same time, without stopping the machine for changing paper roll The whole machine uses 6 cylinders fully hydraulic controlled, hydraulic control arm lift and down, clamping and open, left and right moving Tension control: multipoint pneumatic brakes, brakes good performance, loses heat fast The chuck adopts inner expansion type or teeth type, reduce the destruction of the paper core. saving paper. Electric Mill Roll Stand Product Parameters: Max. Working Width 1000mm-1800mm Min. Working Width 700mm Max. Paper Mill Dia 1500mm Maximum paper diameter 1400mm Max. Supporting Weight (One side) Hydraulic Mill Roll Stand Hydraulic Mill Roll Stand//Corrugated Cardboard Mill Roll Stand/Paperboard Mill Roll Stand :Symmetrical structure, can carry two craft paper at one time, which can work without brake. Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic pressure. feeding craft / reel paper quickly. Product Parameters:Â Mill Roll Stand Parameters Maximum Paper Roll Diameter 1500mm Effective Width 900mm-2200mm Maximum Support Weight 3t Main Axis 242mm Pneumatic Source Pressure(Mpa) 0.4-0.8Mpa Magnetic Valve Voltage 380V 50HZ Working Pressure(mpa) 16-18mpa Mill Roll Stand Characteristics The Structure is Double Rotary Shafts with Four Arms Support Two Paper Mill Rolls on both Arms at the Same Time Hydraulic Control for Paper Mill Roller Up-down, Clamp-open and Centering Web Tension Controlled by Pneumatic Brake or Manual Brake Tapered Center, Stretch Center and Springiness Chucks are Optional
Hydraulic hoses & couplings Hydraulic pumps, fittings, cylinders & filters Manifolds & accessories Pneumatic cylinders, filters & regulators Pneumatic fittings & pipes Pneumatic valves: mechanical, proportional & manual Boosters & regulators
Description: Hydraulic Mill Roll Stand//Corrugated Cardboard Mill Roll Stand/Paperboard Mill Roll Stand: Symmetrical structure, can carry two craft paper at one time, which can work without brake. Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic pressure. feeding craft / reel paper quickly. Function Of Mill Roll Stand: Each arm setup four directions button, it is easy to operate It can be loading two paper rolls at the same time, without stopping the machine for changing paper roll The whole machine uses 6 cylinders fully hydraulic controlled, hydraulic control arm lift and down, clamping and open, left and right moving Tension control: multipoint pneumatic brakes, brakes good performance, loses heat fast The chuck adopts inner expansion type or teeth type, reduce the destruction of the paper core. saving paper.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
Name : Weed control mat/Ground cover/ 1. Weight 2oz/sm - 14oz/sm or 60gsm-150gsm 2. Width 1.6' -20' or 0.5m-6m 3. Roll Length 16', 33', 65', or 5m,10m,20m,25m,50m,100m or as required 4. Color Black,Green,Black-green or as required 5. Weave 8*8,10*10,11*11,12*12,12*16 6. Material 100% PP material 7. UV resistance 3-5 years 8. Sample Avaliable 9. Delivery time About 20 days 10. Min order No limit 11.Terms of payment 1.TT or LC 12. Supply capacity 500 tons per month 13. Packing In rolls with paper core inside and polybag outside or in Carton or as your request 14. Quantity 1x20ft container can load about 11 tons 1x40'HC can load about 26 tons 15.Export market Australia,Canada,Argentina,USA,The Middle East,Europe market ,Japan and so on.
Two tier Galvanized double deck bike rack/bicycle rack For all types of bicycles 2 tier bike rack can accommodate all types of bicycles, such as mountain bikes and town bikes, and any bicycles can also be chained for extra security. Once placed, the bicycle is well supported by wheel channels and the back wheel is stabilised by a gutter to lock the bicycle firmly. The lower rack has a sloping wheel channel, so the user does not have to bend between the levels which makes the cycle parking system simple and easy to use for all ages. This 2 tier bicycle rack is excellent for space saving as the cycle stands are compact with a centre to centre distance of around 370 mm. There is also the option to have the powder coated in any of the 192 RAL colours. Double deck bicycle rack features: 1.This double deck bicycle rack can park 2 bikes per set(one up, one down). 2.assembled in underground garage. 3.used for public place such as hosipital, school etc. 4.beautify the environment. 5.can Save space and prevention of theft.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46).
A flour mill may produce a single or multiple grades of finished flour from the milling of a given wheat or wheat mix. These finished flours are prepared by combining various flour streams that are produced at different stages of milling
