1.Product� Introduction PFA has excellent characteristics and good processability, and is widely used in lining equipment, pipeline valves, chemicals, wire and cable and medical supplies. 2.Technical Parameter Items Test Method FJY-A03S FJY-A06S FJY-A15S FJY-A30S Apprearance / Semi-transparent particies or white powder, no obvious impurities MFR ASTM D1238 0.8~3.0 3.1~6.0 6.1~15.0 16~40.0 Standard Specific Gravity ASTM D792 2.12~2.17 Melting Peak Temperature ASTM D3418 300~316 Tensile Strength (Mpa) , ASTM D638 30 28 26 22 Elongation at Break (%) , ASTM D638 300 300 300 300 Water Content, (%) , HG/T 2902 0.2 3.Main Application Application Representative Products Model Specification Lining Container and Pipeline Lining Pump Valve Gasket welding material FJY-A03S, FJY-A06S Pipe Hose, heat shrinkable rube, heat exchanger tube, level gauge tube FJY-A03S, FJY-A06S Wire and Cable Insulation sheath for communication cables, electronic cables and other cables FJY-A15S, FJY-A30S Electronic and Electrical Components Connectors, sockets, joints, chemical solvent bottles FJY-A03S,FJY-A06S,FJY-A30S Thin Film and Sheet Sheet Lining, Electrical Insulation Tape, Deposition Film FJY-A03S,FJY-A06S 4.Attention PFA is stable and non-volatile at normal ambient temperature, but it will decompose and release certain toxic gases when it is subjection to high temperature during forming process. Therefore, in the process of moulding, extrusion and injection moulding, it is need to ensure good ventilation. In the process of processing, the decomposition gas of PFA may corrosion to the equipment, so it is necessary to avoid the long residence time of PFA in the equipment at high temperature. 5.Mark,Packing, Storage & Transportation 5.1 Mark There shall be firm and clear marks on the drums of this product, indicating company name, product name, batch number, brand number (specification number), net content, etc. 5.2 Package The product is packaged in polyethylene plastic bags and then packaged in cardboard boxes with a net weight of 25 kg per box. 5.3 Storage It should stock in clean,cool,and dry warehouse,prevent from agglomeration and contamination. 5.4 Transportation This product is non-toxic,non-explosive, non-corrosive, according to non-dangerous goods transport.
Fusible Plug Rating : Max. BOP 2 Kg/cm2 Melting Temperature of Fusible Alloy 320 C Material : Forged Steel Description : One Piece Design Ends : Screwed Specials : IBR Item Code : BM000089 Size : 15mm
Fusible Plug Rating : 250 PSIG (17.24 Bar) Steam, Melting Temperature of Fusible Alloy 270 C Material : Bronze, Brass Description : One Piece Design Ends : Screwed Specials : IBR Item Code : BM000086, BM00086A Size : 15mm Notes : Available Valve Size : 15mm to 25mm
Bronze Fusible Plug Rating : 250 PSIG (17.24 Bar) Steam, Melting Temperature of Fusible Alloy 270 C Material : Bronze Description : Two Piece Design Ends : Screwed Specials : IBR Item Code : BM000082 Size : 15mm Notes : Available Valve Size : 15mm to 50mm
Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20
This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
Bronze Spare Cone For Fusible Plug Rating : 250 PSIG (17.24 Bar) Steam, Melting Temperature of Fusible Alloy 270 C Material : Bronze Description : Two Piece Design Ends : Screwed Specials : IBR Item Code : BM000084 Size : 15mm Notes : Available Valve Size : 15mm to 50mm
Silicone cable, multi conductor (36AWG silver plated copper), PFA insulating.
Material characteristics: 1, white, odorless, tasteless, non-toxic powder, commonly known as "plastic king". 2, the active hydrogen atoms on the ethylene monomer are replaced by inert fluorine atoms, and the polytetrafluoroethylene monomer is polymerized. 3, temperature resistance, the operating temperature of -100â??-250â??. 4, high strength weather resistance, radiation resistance and low permeability. 5, non-adhesion, is the smallest surface tension in solid materials, does not adhere to any substance. 6, non-toxic, with physiological inertia, as artificial blood vessels and organs long-term implantation in the body without adverse reactions.
I can provide some general information: PTFE Guide Wire: PTFE stands for polytetrafluoroethylene, which is a synthetic fluoropolymer of tetrafluoroethylene. It is known for its low friction properties and is often used in medical applications. Medtronic: Medtronic is a global healthcare company that produces a wide range of medical devices and technologies. This includes products used in cardiology, neurology, diabetes, and other medical specialties.
Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for manyapplications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 66 68 2. Alumina - (AI2O3) % 17 18 3. Iron - (Fe2O3) % 0.03 0.06 4. Titanium - (TiO2) % 0.03 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 3 8. Potash - (K2O) % 10 12 9. Loss on Ignition - (LOI) % 0.10 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 â?? 72 2. Alumina - (AI2O3) % 17 18 3. Iron - (Fe2O3) % 0.10 0.15 4. Titanium - (TiO2) % 0.03 0.06 5. Calcium - (Cao) % 0.05 0.20 6. Magnesium - (MgO) % 0.10 0.15 7. Soda - (Na2O) % 9 10 8. Potash - (K2O) % 0.50 0.20 9. Loss on Ignition - (LOI) % 0.10 0.20
The description "BARD PTFE FELT: 6" X 6"" suggests a product manufactured by Bard that consists of PTFE (polytetrafluoroethylene) felt material with dimensions of 6 inches by 6 inches. PTFE is a synthetic polymer known for its nonstick properties, chemical resistance, and durability. Here are some general considerations based on the description: Material: PTFE, also known by the brand name Teflon, is a high-performance polymer with excellent chemical resistance and low friction properties. Felt Form: The material is described as "felt," which implies a fabric-like structure with a soft and fibrous texture. Size: The dimensions are specified as 6 inches by 6 inches, indicating the length and width of the material. BARD: Bard is a well-known medical device company that produces a variety of healthcare products, including materials used in surgical and medical applications.
The description "BARD PTFE FELT PLEDGETS 9.5MM X 4.8MM RECTANGLE" indicates a product manufactured by Bard that consists of PTFE (polytetrafluoroethylene) felt material formed into pledgets with specific dimensions. PTFE is a synthetic polymer known for its nonstick properties, chemical resistance, and durability. Here are some general considerations based on the description: Material: PTFE is a high-performance polymer with excellent chemical resistance and low friction properties. The use of PTFE in pledgets suggests applications in surgery or medical procedures where such properties are advantageous. Pledgets: Pledgets are small pieces of material, often used in surgical procedures to reinforce sutures or provide additional support. Dimensions: The specified dimensions are 9.5mm by 4.8mm, indicating the length and width of the rectangular PTFE felt pledgets. BARD: Bard is a well-known medical device company that produces a range of healthcare products, including materials used in surgical and medical applications.
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200C to 260C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and uranium is lower than 0.01ppb Product Specifications: 250ml...
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200 C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and uranium is lower than 0.01ppb 7. The drip tip and bottle cap are molded at one time, and the open mouth can be autoclaved. Product Specifications: 30/60ml
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200 C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and is lower than 0.01ppb 7. Customizable Product Specifications: Common specifications: 1.5/15/30ml Can be processed and customized: 3ml, 7ml and other specifications
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200 C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and is lower than 0.01ppb 7. Marked with scale, smooth surface, no adsorption Product Specifications: 10/30/50/100/250/500ml
PTFE is also used to make gaskets because of its strength and heat resistance. It is also used as a thread seal tape for plumbing. PTFE also has good electric insulation properties and thus it is used to insulate cables and connector assemblies For price , specification and other details please approach us with end Buyers LOI and company profile
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and uranium is lower than 0.01ppb 7. Nozzle and bottle cap are molded at one time: open can be autoclaved Product Specifications: 1. Narrow mouth: 60/100/250/500ml 2. Wide mouth: 250/300/500/1000ml
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200 C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and is lower than 0.01ppb 7. With scale, and the scale is clear and accurate 8. With lip Product Specifications: 5/10/25/30/50/100/200/250/500/1000/2000ml
