UniGuard Ethiopia Speed limiter features: 1 Speed Limiter Enforce to limit the speed of your vehicle if preset maximum speed 2 Tamper proof Maximum speed is 40km/h if maximum speed is tampered or sensor is cut. 3 Download data Data can be stored for 72 hours at interval of 5 seconds. Data can be retrieved by connecting device to computer via USB data port 4 Bluetooth Printer Violations can be printed out for the last one-hour driving. Portable printer prevents drivers from printing Speed violations can be printed 5 Violations alarm All violations will be transmitted to platform. 6 Over speed alarm When vehicle reaches 95% of preset speed limit, built-in buzzer shall make sound alarm to warn driver. 7 Fuel monitoring (optional) Monitor vehicle fuel consumption. Need connect with fuel sensor that gives out analog voltage. Real time fleet tracking Working power: 2W
GPS Speed Limiter Features: 1. GPS Speed Limiter. User can setup top speed to limit vehicle speed either by SMS or computer based tool. 2. Geo fence based Speed Limit. The device support 3 fences to setup different speed limit per fences. 3. USB flash data downloaded. Vehicle travelling data could be retrieved by using a computer or a USB flash or a wireless Bluetooth printer. 4. Data could be stored for at least 72 working hours for future reference, including date, time, speed, car plate number, owner name, fitting center, installer name, installed date, longitude, latitude, etc. 5. Tamperproof. UniGuard vehicle speed limiters are specially designed for none drivers or any other unauthorized people can tamper with the installed devices. Once device is tampered, it shall go to limp mode- vehicle speed is restricted to 40KM/H or 30KM/H. (Per Kenya or Ethiopia Standard) 6. Pre-warn if 95% of set speed limit is reached, beep sound will be produced continuously.
MPPT Solar charge controller Feature 1. We choose high speed and high performance 32-bit processor with excellent EMC design 2. Advanced MPPT tracking algorithm, the tracking efficiency more than 99% 3. High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly 4. Ultrafast maximum power point tracking speed to ensure tracking efficiency 5. Accurate identification and tracking of multi-peak maximum power points 6. With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries. 7. Widely PV arraysâ?? voltage input, this can save the cost of PV combiner box, wires and construction 8. Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment 9. It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function 10. The perfect battery protection function and multi-stage charging improves battery life 11. It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller. 12. Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy 13. It can work with GEL. LEAD-ACID, LITHIUM and other type battery 14. Twice protection function to protect battery from damage when the power switch is down (optional) 15. Standard Modbus communication protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
We choose high speed and high performance 32-bit processor with excellent EMC design Advanced MPPT tracking algorithm, the tracking efficiency more than 99% High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly Ultrafast maximum power point tracking speed to ensure tracking efficiency Accurate identification and tracking of multi-peak maximum power points With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries. Widely PV arrays voltage input, this can save the cost of PV combiner box, wires and construction Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function The perfect battery protection function and multi-stage charging improves battery life It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller. Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy It can work with GEL. LEAD-ACID, LITHIUM and other type battery Twice protection function to protect battery from damage when the power switch is down (optional) Standard Modbus communication protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
Product Description Scientific name : Salvia Hispanica Ingredient : Chia Oil Description : Extra virgin chia oil is made using a careful cold pressing process, ensuring all the seed properties conservation. Nutritional Characteristics : Chia oil contains 62% Omega 3 and is an inexhaustible source of minerals and antioxidants. Sensory Characteristics Color :Light yellow Smell :Caracteristic Taste :Caracteristic Texture :Oily liquid Physicochemical Characteristics Characteristics : Range or Limit Acidity : 0.2 - 0.8 mg KOH/g Peroxide index :
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Chia Seed Oil A great alternative to fish oil! 100% Vegan Plant source of omega 3-6-9 Supports healthy heart and brain functions No more fishy smell or taste Chia seed is the world's richest plant source of omega-3 fatty acids, much higher than other natural sources like flax seed oil or fish oil which often causes unpleasant aftertaste or fishy burps. Chia seed is also rich in antioxidants, high in protein and contains 8 essential amino acids. Other than rich in omega-3 fatty acids, chia seed also provides omega-6 linoleic acids (LA) and omega-9 oleic acids. These three types of unsaturated fats play a critical role in multiple bodily functions. A balanced proportions of omega fatty acids are required by the body for optimal health. Chia seed oil packs more omega-3 into each dose than seeds alone Product Description Scientific name : Salvia Hispanica Ingredient : Chia Description : Extra virgin chia oil is made using a careful cold pressing process, ensuring all the seed properties conservation. Nutritional : Chia oil contains 62% Omega 3 and is an inexhaustible source of minerals and antioxidants Sensory characteristics Color: Light yellow Smell: Caracteristic Taste : Caracteristic Texture : Oily liquid Physicochemical characteristics Characteristics : Range or Limit Acidity : 0.2 - 0.8 mg KOH/g Peroxide index :
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stationsâ?? need, there are 48Vã??96Vã??120Vã??192Vã??220Vã??240Vã?? 360Vã??384Vã??480Vã??492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V 192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
1. Aviation Jet Fuel A1 2. Aviation Jet Fuel JP 54 3. EN590 10 ppm FOB Rotterdam, Fujairah, Houston Minimum 1,000,000 bbl Maximum 5,000,000 bbl No upper limit PROCEDURE ------------------ TRANSACTION PROCEDURES FOR FOB DELIVERY 1. Buyer accepts seller working procedure and issues ICPO with company registration certificate alongside copy of passport page 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice. 3. Seller issue TSR with GPS coordinate to Buyer Company, 4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. 5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties. 6. Seller injects product into Buyers vessel or injects into Buyers tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction. Payment Terms : LC / SBLC / MT 103/TT ---------------------------------------------------------------------- Commodity: Bonny Light Crude Oil (BLCO) Grade: NNPC STANDARD Origin: NIGERIA BLCO Quantity: Initial 1 million or 2 million barrels. Contract: 1year + 2 further years rolling Term: SPOT LIFT / OFF OPEC Price: Dated Brent 3days Before & 3days after the bill of lading $12 Less $5 GROSS $9:00 to buyer, $4:00 to buyer/seller mandate/agents, $1:00 to consultant/handler.
Specifications: Hindalco's lamp cap stock combines strength and high formability with high resistance to softening in vitriting. Manufactured at modern and well-equipped mills, it can be rolled to very fine tolerances, allowing more caps per tonne of coil and enabling uninterrupted operations of high-speed forming presses. Surface quality Surface has a corrosion resistant oil coating. Applicable standards ASTM - B - 209M, Aluminium association aluminium standards and data, Hindalco manufacturing limits (as applicable). L8S is a Hindalco innovation. Packing Lamp cap stock is placed on wooden skids in an eye-to-wall position. It is wrapped in HDPE fabric and hardboard and strapped with hoop iron. Moisture protection is ensured with silica gel packets and the entire packed product is placed in a wooden box. Applications : GLS lamps and tube lights
Wholesale Passenger Car PCR Tyre, 4WD Offroad SUV 4X4 at/Mt Mud Tyres, Truck tires, tractor, excavator Sizes: 12.00R20 Type Inner Tube Structure All-steel radial Position steer/all position Application Off road Features: Wider tread, High speed, low rolling resistance, excellent wet grip etc. Place of Origin China Loading Port Qingdao Certificates: ECE, etc. OEM Yes Supply Ability: 7 million pieces per Year Min. Order: 1*20 GP HS Code: 40112000 Technology: German Technology Quality warranty: 120000� km Shipment Date: Within 15 days after deposit Package: Standard package for exporting Supplier Star Rating: Top five stars
Description for 90hp-120hp tractor Product model HB904 HB1004 HB1104 HB1204 Wheel drive 4x4 Dimension(L*W*H) 4530x2050x2930mm Weight 3690-3840� kg Front wheel Tread 1490,1580,1650,1740� mm limited adjustable Rear Wheel Tread 1520,1620,1740,1850 limited adjustable Wheel Base 2195mm Min Land Clearance 405mm Gear shifts 16F+8R Tyre Size 12.4-24/16.9-34 (14.9-30/8.3-20) Steering gear Hydraulic steering Rear Suspension Three-point Suspension Engine Specification Engine Model LR4M5 LR4M3Z YT4B3Z LR4M5Z Type Water cooled ,Vertical,4 stroke and Direct injection Rated Power(kW) 66.2 73.5 80.88 88.2 Rated Revolution 2300/2400r/min Start Way Electricity Start Transmission 4(2+1) 2 shifts Clutch Single chip,Dry friction, Double clutch PTO Speed 6 or 8 spline 540/1000
Desi Chick peas: The Desi type is smaller in size, has a thick, dark colored seed coat and is either de-hulled and split or de-hulled and ground into flour. It can also be roasted and puffed after splitting. Desi Chick peas has high fiber content compared to the Kabuli variety, which has small, darker seeds and a rough coat, cultivated mostly in the Australia, Indian subcontinent, Iran, Mexico & Ethiopia. The Desi (meaning â??countryâ?? or â??localâ?? in Hindi) is also known as Bengal gram or kala chana. The Desi type is used to make Chana Dal, which is a split chickpea with the skin removed. Desi Chick peas are used mainly in dhal, sauces, puffed or ground into flour. It is widely used in Asian and African cuisines. Desi is likely the earliest form since it closely resembles seeds found both on archaeological sites and the wild plant ancestor (Cicero reticulate) of domesticated chick peas, which only grows in southeast Turkey, where it is believed to have originated. Desi chick peas have a markedly higher fiber content than Desi types have small angular seeds weighing about 120 mg, are wrinkled at the beak and range in color from brown, light brown, fawn, yellow, orange, black or green. They are normally dehulled and split to obtain dhal and are favored in India. It is mainly produced in Australia, Canada, Myanmar, Ethiopia, Tanzania and Malawi in Africa & exported to India, Bangladesh, Pakistan & Sri Lanka. Specification of Desi Chick Peas Properties Values / Limits Foreign Matter Max. 1% Green (Cotyledon color), Immature, shrunken, shriveled seeds Max. 3% Broken and Splits Max. 2% Damaged and Weeviled 3% (Weeviled 2% max.) Moisture 10% Varietals Admixture Max. 3% Processing The grades are Machine Cleaned, HPS (hand-picked and selected) Sortexed Storage Chick peas can be stored for 6-12 months, without exposure to heat, light and moisture.
Specification: Model No S23 Ultra Body Material Polycarbonate CPU MTK6889, Deca Core (Latest 10 Core) Features Full screen, Face recognition, Dual SIM, Wi-Fi, GPS, Gravity Sensor, Alarm,Calendar , Calculator,Audio recorder, Video recorder, WAP/MMS/GPRS, Image viewer, E-Book, World clock, Tasks card, rear flash Resolution 7.2HD+ Full Display 1440*3200 Package Box Package Included: 1x Phone 1x Screen Protector (pre-applied) 1x Phone Case 1x Type-C Cable 1x Power Adapter 1x SIM Tray Ejector 1x Quick Start Guide Attention: Due to the difference in light, the actual color of the phone may be slightly different from the screen and pictures. Color names are used only to differentiate individual SKUs. Please understand this. Thanks. Battery capacity, specific charging speed, usage time, and other data may vary slightly due to power cords, power adapters, and ambient temperature. When the mobile phone is completely out of power and automatically shuts down, it must be charged for more than 10 minutes before turning it on. It is recommended to charge the battery when it is below 20%.