Thickness: 200 mic Ink: eco-solvent/uv Size: 36''/42''/50''/60''*30m Structure: coating+pp+pet+pp Application: hanging flages /roll up banners/x-banners/l-banners Printing:eco-solvent one side printable / uv&latex double side printable
Raw Material : PP or BOPP Raw Material : Virgin material or recycled Color : All kinds of colors or as the customers requirement Printing : One side or both sides in multi-colors with film or non film Width : From 260-1300mm Length : As the customer’s requirement Weave : 10x10,11x11,12x12,14x14 or be customized Denier : 450D to 1500D Weights/m : 50g to 200g Surface Dealing : Anti-slip or plain Top : Heat cut or hemmed Bottom : Single folded, double folded, single stitch, double stitch Liner : coated or with liner bag for moisture proof Usage : rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing : 500pcs(bale),1000pcs(bale) or can be customized Minimum Order 20 feet container Delivery Time : 10-30days after place an order or negotiation Trade Term : CIF, CNF, FOB QINGDAO Special Requirements : As the customers requirements Treat : UV treated or as the customers requirement Loading qty. : 12 Tons/20’container, 23tons/40’hq. We can make all kinds of size
Raw Material: PP or BOPP Raw Material: Virgin material or recycled Color: All kinds of colors or as the customers' requirement Printing: One side or both sides in multi-colors with film or non film Width: From 260-1300mm Length: As the customer’s requirement Weave: 10x10,11x11,12x12,14x14,12×11or be customized Denier: 450D to 1500D Weights/m²: 50g to 200g Surface Dealing: Anti-slip or plain Top: Heat cut or hemmed Bottom: Single folded, double folded, single stitch, double stitch Liner: coated or with liner bag for moisture proof Usage: rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing: 500pcs(bale),1000pcs(bale) or can be customized Minimum Order20 feet container Delivery Time: 10-30days after place an order or negotiation Trade Term: CIF,CNF,FOB QINGDAO Special Requirements: As the customers' requirements Treat: UV treated or as the customers' requirement Loading qty.:12tons/20’container, 23tons/40’hq. we can make all kinds of size
Specification: We do shopping bags in various design and fabrics. Promotional, seasonal, Non-Woven, PP Woven, Laminated Non-Woven, Laminated PP Woven, cotton coated, PVC Bags, Canvas, Cotton, Polyester, Nylon, Jute bags, Sisal bags, leather bags, beach bags. Foldable bags, Paper bags, Wine bags, School bags, Tote Bags. Recycled, reuse bags. Silkscreen Printing, Offset printing, digital Printing, UV Printing etc. Keywords : Shopping bags various design and fabrics. Promotional, seasonal, Non-Woven, PP Woven, Laminated Non-Woven, Laminated PP Woven, cotton coated, PVC Bags, Canvas, Cotton, Polyester, Nylon,Jute bags, Sisal bags, leather bags. Foldable bags, Paper bags, Wine bags, School bags, Tote Bags, Beach Bags. Recycled, reuse bags. Silkscreen Printing, Offset printing, digital Printing, UV Printing.
Specifications: Sheet Size:210mm x 297mm, International Size A4 Quality: Imported 100% Virgin Wood Pulp Whiteness = 102-104%, Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 Cobb Test: 27-33 g/m2 27-33 multi-function A4 copy paper Basic weight - 70gsm, 75gsm, 80gsm Size - A4, A3, 8.5*11",8.5*13",11*17" Moisture - 3.5%-4.5% capapacity - >94% Brightness - 101-104% Place of Origin - Thailand Key Performance - No jam in photocopy machine Leave no dust in the copy machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides Been developed for Photocopy Machines,Laser Printers,Inkjet Printers,Fax Machines Packing - 500sheets/ream,5,8 or 10reams/carton PACKING DETAILS - 500 Sheets per Ream 5 Reams per Box 1560 Boxes per 20ft container( With Pallet) 1600 Boxes Per 20ft container( Without Pallet) 7800 Reams Total in one 20FCL( With Pallet) 8000 Reams Total in one 20FCL( Without Pallet)
Ginger root Botanical name: Zingiber officinale Linn. Family: Zingiberaceae. Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant. Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice. Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position. Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed. Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils. The composition of dry ginger is given below: Dry Ginger rootMoisture:6.9 % Protein:8.6 % Fat:6.4 % Fiber:5.9 % Carbohydrates:66.5 % Ash:5.7 % Calcium:0.1 % Phosphorous:.15 % Iron:0.011 % Sodium:0.03 % Potassium:1.4 % Vitamin A:175 I.U./100 g Vitamin B1:0.05 mg/100 g Vitamin B2:0.13 mg/100 g Niacin:1.9 mg/100 g Vitamin C:12.0 mg/100 g Calorific value:380 calories/100 g. Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.
1. coco peat (coir pith), coir rugs, 2. textile chemicals, polysols, binders, thickeners and many other industrial chemicals, 3. sugar confectionary products like lollipop etc. 4. eco friendly, sugarcane and paper packaging products like coffee/tea cups, beverage cups all sizes, takeaway lunch boxes, straws, etc. 5. frozen indian snacks like samosa, patties, mix veggies, all kinds of indian snacks and frozen foods. 6. pvd coated sanitary ware like kitchen sinks, basins, railing, taps, and other furniture with elegant polishes of gold, rose gold, black, silver, multi color, champagne colour, etc in different textures. 7. dehydrated vegetable and fruit powders like, dehydrated garlic powder, ginger powder, chickoo powder, etc. 8. onions 9. all kinds of supermarket items .Export and import
Product Name: PE coated paper roll; Base Paper Weight: 50~350gsm; PE Weight: 15~25gsm; PE coating Type: single side or double side; Width: 600~1200mm; Roll Dia: 1100~1200mm; Core Dia: 3 inch or 6 inch; MOQ 15 Tons FOB price: TBD Term of Price: FOB Shenzhen port or CIF destination port Port of Loading: Shenzhen port Delivery Time: ~30 days
Coconut fibers is an eco - friendly material which are found between the hard, internal shell of the outer coat of a coconut. After fully mature coconuts are harvested, they are put into machines to separate the long bristle fibres underneath the skin of the nut. This process is called wet-milling. The coconut fiber is relatively waterproof, and is one of the few enviromental materials that are resistant to damage by seawater. Specification; Product name: Coconut fiber Place of Origin: Vietnam Color: Natural Brown Material: Raw coconut husk Feature: Environment Friendly
Production: Dinner Spoon Material: Wooden , non-toxic, non-irritation, eco-friendly,durable, lightweight paper, styrofoam or pp bag, put in 5-ply brown carton for loading on container. We can use inner carton if necessary Size: Variable Color: Burgundy, Chocolate Design: Customized Designs Surface: Polished Smooth Feature: 100% natural material, eco-friendly, durable, decoration, alternative usage Delivered: Time 35-40 days after receiving deposit or L/C or according to your exact order Payment: By T/T with 50 % deposit and 50 % against copy of original documents or L/C at sight Shipping: Support Express - Sea freight - Air freight
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
Pepper export from Vietnam is considered as the biggest supply all over the world, contributing 1/3 of global production and over 50% of trade volume (about 150,000 tons per year). CET GROUP JSC is one of the leading exporters in VIETNAM Understanding that quality is the key to ensure long-term and repeated orders, our experienced team is working hard with supported by many big Manufacturers in Vietnam with the most modern technology imported from Europe and two dedicated cleaning lines, a steam sterilization machine. We can commit a high standard of pepper to specific requirements. - Capacity: 20,000 MT per annum. CET GROUP JSC can supply all grades of pepper whole including: For Black Pepper: Grades available: Fair Average Quality (FAQ), Machine Cleaned (MC), ASTA 560/570 g/l, 5mm bold, Steam sterilized (HTST), Rainforest Alliance pepper (RA). 500 G/L, 550 G/L, 570 G/L, 580 G/L, 570 G/L BOLD Moisture: 12.5% max Foreign matter: 0.2 - 1% For White Pepper: Grades available: White pepper 630 G/L DW FAQ, White pepper 630 G/L DW machine cleaned, White pepper 630 G/L DW steam sterilized (HTST). Moisture: 12.5% max Foreign matter: 0.2 -1% Black bean: 3% max PACKING: With the automatic packaging line controlling metal, our facility can supply all size of packaging from slack bags of 25 kg, 50 kg, 60 kg or 50 lbs to bulk bags of 500 kg, 625 kg, and 725 kg. Packaging materials are PP bag, jute bag or paper bag.
Specification: Copy paper 80 Gsm. Paper size A4 (210 X 297 mm.) Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Available size 250 sheets and 500 sheets (1ream) Product details A3 (297x420 mm.) 500 sheets A4 (210x297 mm.) 40 sheets, 100 sheets and 500 sheets B4 (257 X 364 mm.) 100 sheets F14 (216 X 356 mm.) 40 sheets, 100 sheets and 500 sheets Our main paper as below: Whiteness: A grade (102-104%) B grade (98-100% ) C grade (94-96% ) Weight: 70 gram; 75 gram; 80 gram Advantages of Double A Paper: 1. Smooth paper surface makes sharp printing and copying. 2. Two-sided usage gives the paper sheet high opacity. 3. Bright Appearance gives high print contrast to the printing. 4. Sharp cutting edges prolongs performance of copying machine. 5. Anti-curl quality reduces paper jams in the copier. 6. Low dust content minimizes copier running cost. 7. 500 sheets guarantee in Each Pack Double A Paper (Pack 500) 8851960002564 Double A Paper(Pack 250) 8851960001031 Double A Paper(Pack 100) 8851960001314 "Double A Paper from Farmed Trees" ORIGINAL FACTORY DIRECT PACKING: 500 Sheets per Ream 5 Reams per Box 1560 Boxes per container(With Pallet) 1600 Boxes Per container( Without Pallet) 7800 Reams Total in one 20FCL( With Pallet)
Material: PC coated PMMA Sheet off cuts Transparent color Category: PC coated PMMA Type: Sheet off cuts Grade/Color: Transparent color Quantity: 63 Tons Loading weight: 22 Tons Spec: PC coated PMMA all clear color base, with one or both sides PE film protected. Subject to unsold
Material: PC coated PMMA Sheet off cuts Transparent color Category: PC coated PMMA Type: Sheet off cuts Grade/Color: Transparent color Quantity: 63 Tons Loading weight: 22 Tons Spec: PC coated PMMA all clear color base, with one or both sides PE film protected. Subject to unsold
Material: PC coated PMMA Sheet off cuts Transparent color Category: PC coated PMMA Type: Sheet off cuts Grade/Color: Transparent color Quantity: 63 Tons Loading weight: 22 Tons Spec: PC coated PMMA all clear color base, with one or both sides PE film protected. Subject to unsold
Specification: 80mt -month, Pp roll with calcium carbonate (50% calcium carbonate) Sample available. Most of it is the surface of the business card case. It is part of the material used when coating from the top of some business card paper Color: White Origin: Japan Loading Weight: 22-23 MT
JH Glass shower door is produced with several types of raw glass. The current modern design trend has given us more choice on glass types, colors, and patterns. Shower door glass is made by tempered glass, with excellent drilling, cutouts, polished edge. Products series : Tempered clear glass clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean Tempered raindown/nashiji pattern glass The pattern bring distinctive decorative on glass surface Let the glass in high opacity ,guarantee a higher level of privacy One side of the glass is patterned ,and the other side is flat for easier cleaning Tempered acid etched glass/ gradient change glass Processed on base of acid etched glass The opaque and satin surface bring artistic effect Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs. Tempered low iron glass High light transparent with colorless appearance The glass blue edge makes the whole shower enclosure in high grade Tempered glass with anti-limescale coating For preserve the functional and aesthetic properties of shower glass , JHG offer coated glass for avoid damage caused by water sediments.
