1.1 Introduction APVA-402 is a special instrument for testing characteristic of CT and PT .The tester can finish CT/PT transformation ratio test, CT/PT polarity test, volt-ampere feature curve drawing and CT error drawing. It has large output, high precision,stable performance and automatic testing. 1.2 Funtion 1 CT/PT transformation ratio test 2 CT /PT polarity test 3 CT /PT volt-ampere feature curve measurement 4 CT ratio error measurement 5 Error curve measurement 6 Result print 7 Unload data to PC 8 PC online test . Wooden case.
Product Introduction Transformer Tester is new product created after widely adopt customers advices and deep theoretical study. It is based on the automatic FA Series Transformer Tester General which is produced by our company that is widely acclaimed and applied. The adoption of high-performance DSP and ARMadvanced manufacturing technology ensure a stable and reliable product performance full-featured high degree of automation high efficiency in the domestic leading level they are the professional testing equipments for transformer check in power industry. Product namesï¼?CT parameter analyzer CT analyzer frequency CT analyzer CTPT analyzer transformer tester frequency transformer characteristic tester transformer transient characteristic analyzer current transformer tester CT characteristics analyzer current transformer current transformer parameters analyzer features analyzer CT parameter tester tester current transformer current transformer parameters characteristics tester Comprehensive instrument for the transformer Recommended products
Product Introduction Designed for automatic testing of protective and metrological CT/PT suitable for laboratory and field testing. The product namesï¼?PT volt-ampere characteristic tester transformer volt-ampere characteristic integrated tester CT voltage-current characteristic integrated tester CT voltage-current characteristic tester PT volt-ampere characteristic tester transformer volt-ampere characteristic tester volt-ampere characteristics of variable polarity than integrated tester volt-ampere characteristic tester volt-ampere characteristics integrated tester volt-ampere characteristic tester features comprehensive tester
Product Introduction Designed for automatic testing of protective and metrological CT/PT suitable for laboratory and field testing. The product names PT volt-ampere characteristic tester transformer volt-ampere characteristic integrated tester CT voltage-current characteristic integrated tester CT voltage-current characteristic tester PT volt-ampere characteristic tester transformer volt-ampere characteristic tester volt-ampere characteristics of variable polarity than integrated tester volt-ampere characteristic tester volt-ampere characteristics integrated tester volt-ampere characteristic tester features comprehensive tester
GF106 CT/PT TESTER is mainly used for field testing, it can finish the measurements (M) and protection (P) class CT, PT and TYP class CT. Adopt LCD, self-equipped mini type printer supporting field printing; supporting to use USB flash disk to dump data, with simple and convenient operation.
Hipot tester, earth resistance tester, transformer tester, CT PT tester, MOA arrester tester.
Agriculture items, spices, coffee.Export
Our high voltage testers cover full range: high voltage hipot tester, circuit breaker switchgear tester, transformer tester, relay protection tester, ct/pt tester, moa/insulator tester, sf6/insulation oil test equipment, resistance tester, etc..
Transformer tester, high voltage tester, circuit breaker tester, ct pt analyzer, sf6 gas tester, transformer oil tester, other tester.
PCT200Ai is the current transformer test set can finish various tests of different transformers. Compared with PCT200i,its accuracy is higher.This CT analyzer can test the 0.2s class CT.Only this CT analyzer - the high-accuracy current transformer test set has passed the tests held by Wuhan High Voltage Research Institute.The max permissible error of ratio measurement is �0.05% and max phase measurement is �2min. Features Can test M/P/TP type CTand PT Ratio check up to 35000:1 and 45000:5 Knee point check up to 45000 V Standards: IEC 60044-1, IEC 60044-6, IEC 61869-2, ANSI/IEEE C 57.13 Result saved directly in Excel format Report can be transferred to flash disk via USB port. Weight : 14kg
PCT200i is specially designed for current transformer characteristic test. PCT200i owns more test items and higher technical parameters.This CT analyzer can finish the measurement class CT and TYP class CT.The additional functions include ratio and angle differential tests (the measurement points in the GB standard),FS and inductance,steady-state parameters,peak error and transient parameters,etc. Features Test CT according to IEC60044-1/6, IEC61869-2, C57.13 Can test all types of CT, including bushing and GIS type CT One test can get all CT parameters Fast test time for excitation test 10kV knee point test: 50s 1kV knee point test: 15s Ratio check up to 30,000:1 Knee point check up to 30,000V PT test functions are also in-built Test results can be saved to flash disk Optional Excel format report generation Large color LCD display Weight : 10kg
Wood charcoal,sawdust charcoal,hexagonal bbq charcoal.
Test different types of MU in electronic transformer input, magnetic transformer input and electromagnetic transformer input, integrate with reliable analog output and high-speed digital signal process. Support GPS, IRIG-B and PPS timing method, 0.05% high accuracy analog output and strong abnormal SMV function. POM2-3333 can also test SMV accuracy, data process delay, clock synchronization, time accuracy, abnormal SMV and SMV time dispersion,etc items. Functions: Background software can do programming of the electrical wiring graph and configuration and fault simulation of protection relays, analog the setting of specifications of MU, digital terminal devices and specifications setting of fault and fault points. The entire testing and operation process can be controlled by the background software. Two kinds of test modes ensure absolute time delay parameters of MU and complete the SMV response time test accurately. The timing function makes tests on MU's clock synchronization and time accuracy, etc time characteristics. SMV analysis analyzes SMV and GOOSE messages output by MU in real-time. It tests the MU's self-checking and fault process by SMV quality bit, signal remark in GOOSE or the defined warning information in GOOSE. The electric quantity in SMV can display the wave, binary status and previous displacement time. The SMV and GOOSE abnormal output by MU can be judged and analyzed by multi abnormal SMV detection systems. The accurate timing remark on SMV can statistic and evaluate the time dispersion of MU's SMV.
PW460 (6*15A, 4*300V) is the 3 phase relay test equipment can test all types of protective relays.This relay test kit has in-built output monitoring and recording function and also supports testing kit IEC 61850 IED.Optional accessories include external amplifier,GPS,Circuit Breaker Simulator,Current Booster,etc. Features 6*15A, 4*300V Aux DC (0-300V), DC measuring inputs 8 binary inputs, 8 binary outputs Adjustable threshold (0-400V) for binary inputs In-built analog monitoring and recording function Can be upgraded to support the test of IEC61850 complied relay
PW466i (6*20A, 6*150V) is a powerful secondary injection test set with 6-currents and 6-voltages sources.This advanced secondary injection kit is capable of testing differential relay and synchronizing relay. Optional upgrade is available to support the test of IEC61850 relay. Features 6*20A, 6*150V Aux DC (0-300V) 8 binary inputs, 4 binary outputs Adjustable threshold (0-400V) for binary inputs In-built analog monitoring and recording function Can be upgraded to support the test of IEC61850 complied relay
Test different types of MU in electronic transformer input, magnetic transformer input and electromagnetic transformer input, integrate with reliable analog output and high-speed digital signal process. Support GPS, IRIG-B and PPS timing method, 0.05% high accuracy analog output and strong abnormal SMV function. POM2-3333 can also test SMV accuracy, data process delay, clock synchronization, time accuracy, abnormal SMV and SMV time dispersion,etc items. Functions: Background software can do programming of the electrical wiring graph and configuration and fault simulation of protection relays, analog the setting of specifications of MU, digital terminal devices and specifications setting of fault and fault points. The entire testing and operation process can be controlled by the background software. Two kinds of test modes ensure absolute time delay parameters of MU and complete the SMV response time test accurately. The timing function makes tests on MU's clock synchronization and time accuracy, etc time characteristics. SMV analysis analyzes SMV and GOOSE messages output by MU in real-time. It tests the MU's self-checking and fault process by SMV quality bit, signal remark in GOOSE or the defined warning information in GOOSE. The electric quantity in SMV can display the wave, binary status and previous displacement time. The SMV and GOOSE abnormal output by MU can be judged and analyzed by multi abnormal SMV detection systems. The accurate timing remark on SMV can statistic and evaluate the time dispersion of MU's SMV.
NF801 is the new generation of digital relay tester. This digital relay tester is equipped with 8 optical ports, and its powerful data processing capability can achieve the full functional test of the IEC61850 devices. Support GPS\ IRIG-B\ IEEE 1588 synchronization, it makes the substation internal debugging and substation to substation combine debugging available. NF801 integrated some unique functions including: the abnormal SV\GOOSE simulation, virtual terminal test, the optical power testing and so on. Features 8 fiber optical ports for:Receiving and sending IEC61850-9-2 format SV and GOOSE message;Receiving and sending IEE1588 message;Measuring received fiber optical power Provide flexibility to configure both SV (IEC61850-9-2) and GOOSE ports independently. Each port can be configured as Receive and Send at the same time or it can be configured as Receive or Send. Can check the GOOSE communication link SV, GOOSE configure message can be saved and recall repeatedly With the IEEE1588 synchronization function, deviation of the time is less than ±80ns With GPS, IRIG-B code synchronization interface
TD series testing equipment consists of control unit and DC high current output unit.TD2000,the DC test equipment outputs 0-2000A with 0.1% high accuracy DC current used in HVDC convertor station and testing DC current transformer characteristics. Features Manual and auto test by software Output DC current waveform by USB port Multi high current connector for busbar Easy panel control with LCD display and rotary encoder
T1000 primary injection test set is the model featured with light weight and 2 minutes output time at 1000a. This ideal primary injection test set with lcd display, quick control button and rotating mouse is very easy and convenient to operate. Features 2 minutes continuous output at 1000a Flexible control over output, such as manual, ramp, etc Independent aux dc supply In-built multi-meter facility Typical ct testing functions are also included Weight : 30kg