The 5kw wind turbine is an equipment to convert wind energy into electric power which is changed into storage battery group(off-grid type ) or feeding to ac grid (on-grid type) . It can be widely used in rich wind areas but without normal energy supply from any power system .It is capable of providing power for illumination, driving appliances, communication devices, electric tools and so on.
The 5kw wind turbine is mainly composed of generator, blade, tail, hub, manual brake system, controller, dump loader, inverter, tower, tower base, cable , accessories.
Main technical performances:
Rotor diameter (m): 5.0
Material and number of the blades: reinforced fibber glass*3
Rated power/maximum power : 5000/7500
Rated wind speed (m/s): 10
Startup wind speed (m/s): 3
Working wind speed (m/s): 3-25
Survived wind speed: 40
Rated rotate speed(r/min): 300
Start torque (n/m): 4.5
Working voltage: dc48v/dc240v
Generator style: three phase, permanent magnet, ac
Charging method : constant voltage current saving
Speed regulation method : electromagnetic brake+ yawing
Stop method: electromagnetic brake+ manual
Tower style : guy wire tower /free stand tower/ folded tower
Tower height (m): 8/10/12/13/15/18
Life time: >15years
The 5kw wind turbine is an equipment to convert wind energy into electric power which is changed into storage battery group(off-grid type ) or feeding to ac grid (on-grid type) . It can be widely used in rich wind areas but without normal energy supply from any power system .It is capable of providing power for illumination, driving appliances, communication devices, electric tools and so on.
The 5kw wind turbine is mainly composed of generator, blade, tail, hub, manual brake system, controller, dump loader, inverter, tower, tower base, cable , accessories.
Main technical performances:
Rotor diameter (m): 5.0
Material and number of the blades: reinforced fibber glass*3
Rated power/maximum power : 5000/7500
Rated wind speed (m/s): 10
Startup wind speed (m/s): 3
Working wind speed (m/s): 3-25
Survived wind speed: 40
Rated rotate speed(r/min): 300
Start torque (n/m): 4.5
Working voltage: dc48v/dc240v
Generator style: three phase, permanent magnet, ac
Charging method : constant voltage current saving
Speed regulation method : electromagnetic brake+ yawing
Stop method: electromagnetic brake+ manual
Tower style : guy wire tower /free stand tower/ folded tower
Tower height (m): 8/10/12/13/15/18
Life time: >15years
Carbon fish meat grill oven process:
A. special high temperature resisitant material,high heat deformation,the overall structure uses professtional plate ;
B.all into oxygen at the bottom of the damper desigh,fast burning heat rapidly ,at teh top of the air valve design,effective control of heat loss;
C. origianl putty separation technology,completely avoiding using process because of the putty mixed soot and open flame,ensure clean,health and safety ;
D.equipment applied double high temperature heat insulation material,insulation system,insulation with security,external direct touch with no hidden dangers.
Operation method:
A. all burning charcoal in the burning charcoal ,open at the top the smooke at the bottom of the mouth and damper;
B.charcoal burning closed 10 minutes to the degree of smoke-free smoke at the top of the mouth,the heat;
C.after the temperature reaches the standard,in the baking objects to buy object ;
D.5-10minutes,bake fish until brown on both sides,are taken from the furnace, the plate feeding .
Equipment advantages :
A. unique design principle ,the use of charcoal smoke all gathered in the grilled fish inside furnace,through the top of the exhaust pipe directly emitted;
B.rapid heat,guarantee the production speed,let the charcoal furnace cavity fully burning rapied heating up,wind valve,and through the top to the bottom of the design of air supply outlet temperature in the furnace in a 300-350 degree,put the fish in the distribution on the stove on content cabinet ,only 8-10 minutes can be produced;
C. a novel view and admire a gender ,the design of the gear type appeared in front of customers,the grilled fish process more transparent,more ornamental ,fish and clients directly face to face "communication " ;
D this design flexibility ,the real achieve a multi-purpose furnace, can bakering chicken duck cattle and sheep for equipment use diversification more rich .
Fuel: dual-use carbon box ,burning charcoal or alcohol (vegetable oil ) ,pump design.
Installation and commissioning
Overall production : have direct admission requiements,no installation commissioning ,one pace reachs the designated position .
1.Solve the smoke problem charcoal grilled fish
we are familiar with most of the fish appeared in the night street food stalls ,a rectangular fish furnace ,a big fan, the air is filled with smoke smell fish .
pellet machine, with the advantages of low noise, easy and stable operation,
high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing.
Features :
1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily.
2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding.
3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain.
4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines.
5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.
control method adjust speed method pneumatic pitch
brake method mechanical
generator generator configuration 3-phase 380/220v 50/60hz
generator type 3-phase permanent magnet AC
protect class IP54
blade technology resin is imported from american ashland,acuum slip casting, no bubble ,high strongth
1.Low start wind speed and starting torque, high generating efficiency
2.Permanet magnet wind turbine generator, durable in use
3.Yaw motor system and pitch system, aerodynamic brake & manul brake
4.Glassfibre high efficiency blades
5.Simple construction, easy install and minimal maintenance
6.Service life is more than 15 years
Packaging details: plywood cases or according to your need
Delivery detail: within 7 -15 days, this according to the quantity
Generator parameters:
Type: pmg 3 phase
Rated voltage: ac 250v
Rated current: ac 11.5a
Protection level: ip54
Controller output:
Output voltage(on-grid): dc 50-375v
Output voltage(off-grid): dc 48v/110v
Over speed protection & braking system:
Speed control style: pitch control system
Brake style: automatic hydraulic brake
Advantages of vawt:
Nearly quiet
Birds friendly
More safety features
Wonderful performance at low wind speed
Captures wind from all directions
Longer working life
Less maintenance
Less requirements on foundation
Advantages over other vawt:
High efficiency
Pitch control to govern speed
Automatic hydraulic brake
7 cubic meters, gross weight 1120kgs, net weight 995kgs
A 40ft open top container can hold 8 units. (excluding the tower)
Omniscient International, an ISO & CE certified manufacturer, offers Brush Holders for Rotor & Stator Motors, engineered for high reliability in rotating electrical machinery. Made from durable brass or stainless steel, with a golden or silver metallic finish, these brush holders ensure precise brush positioning, consistent contact pressure, and minimal wear during high-speed rotation. Ideal for both rotor and stator assemblies in industrial motors, these holders are widely used in slip ring motors, alternators, and winding machines. Available in standard sizes or customized as per OEM drawings for efficient integration and long-term performance.
The gearbox of a wind turbine is one of the key components in wind power generation equipment, used to transfer the kinetic energy of the rotating wind turbine to the generator, thereby generating electrical energy. It is usually composed of multiple gears, which increase the speed of the wind turbine through precise transmission ratios and convert it into a speed suitable for the operation of the generator. Usually, the speed of the wind turbine is very low and far from the required speed for the generator to generate electricity. It must be achieved through the speed increasing effect of the gearbox gear pair, so the gearbox is also called a speed increasing gearbox.
Grade C NitrocelluloseCellulose nitrate CAS 9004700
Nitrocellulose is a white odorless and odorless solid Celluloid plastic is a thermoplastic material containing 20 camphor plasticizer It softens significantly at 80 can be molded and processed at 110125 and can self ignite above 165 Transparent soft with high mechanical strength and low water absorption No deformation and no white spots in boiling water for 2 minutes Stable to water and general dilute acid solutions can be corroded by dilute alkaline solution partially soluble in benzene and dichloroethylene and soluble in solvents such as ethanol and ethyl acetate
Nitrocellulose is mainly used in the plastic industry to manufacture stationery and educational items such as table tennis balls triangular plates pen holders eyeglass frames toys and umbrella handles and tool handles in daily necessities Nitrocellulose can also be used as a fiber adhesive coating and substrate material
This product is nontoxic This product belongs to Class A flammable dangerous goods Packaged in wooden boxes with plastic bags lined inside Each box should not exceed 160kg or packaged according to user requirements There should be a flammable mark on the outside of the box Storage should be placed in a dry ventilated and clean warehouse away from heat sources and direct sunlight It should not be stored together with acidic self igniting and explosive materials It is strictly prohibited to approach open flames Transportation should be protected from sunlight and rain and should be carried out in accordance with the transportation regulations of the transportation department for dangerous goods
CN is fully kneaded with plasticizers such as camphor solvents alcohol dyes or pigments in a kneading machine at 36 and then filtered in a pressure filter at 60 The filtered material is rolled on a two roller rolling machine and the resulting thin sheet is crushed dried flattened or polished to obtain sheetlike CN plastic The rolled thin sheet can also be placed into an extrusion machine to form a tubular object
Nitrocellulose is a white, odorless, and odorless solid. Celluloid plastic is a thermoplastic material containing 20% camphor plasticizer. It softens significantly at 80 , can be molded and processed at 110-125, and can self ignite above 165 . Transparent, soft, with high mechanical strength and low water absorption. No deformation and no white spots in boiling water for 2 minutes. Stable to water and general dilute acid solutions, can be corroded by dilute alkaline solution, partially soluble in benzene and dichloroethylene, and soluble in solvents such as ethanol and ethyl acetate.
Method of production
Nitrocellulose is a mixture of acid that nitrates cellulose, undergoes acid removal, pre washing, boiling, washing, dehydration, and then uses alcohol to remove water, resulting in nitrocellulose containing alcohol.
purpose
Nitrocellulose is mainly used in the plastic industry to manufacture stationery and educational items such as table tennis balls, triangular plates, pen holders, eyeglass frames, toys, and umbrella handles and tool handles in daily necessities. Nitrocellulose can also be used as a fiber, adhesive, coating, and substrate material.
Security
This product is non-toxic. This product belongs to Class A flammable dangerous goods. Packaged in wooden boxes with plastic bags lined inside. Each box should not exceed 160kg, or packaged according to user requirements. There should be a "flammable" mark on the outside of the box. Storage should be placed in a dry, ventilated, and clean warehouse, away from heat sources and direct sunlight. It should not be stored together with acidic, self igniting, and explosive materials. It is strictly prohibited to approach open flames. Transportation should be protected from sunlight and rain, and should be carried out in accordance with the transportation regulations of the transportation department for dangerous goods.
Forming processing
CN is fully kneaded with plasticizers (such as camphor), solvents (alcohol), dyes (or pigments) in a kneading machine at 36, and then filtered in a pressure filter at 60 . The filtered material is rolled on a two roller rolling machine, and the resulting thin sheet is crushed, dried, flattened, or polished to obtain sheet-like CN plastic. The rolled thin sheet can also be placed into an extrusion machine to form a tubular object.
4427 Ce 5Kw Pm Direct Drive Wind Turbine Suppliers
Short on time? Let Ce 5Kw Pm Direct Drive Wind Turbine sellers contact you.
