Products Specification� Property Test Method and Unit Specification Range Softening Point Ring&Ball,°C 95-130 Color Gardner,50%Toluene Solution 0-3 Acid Value mgKOH/g 0.1 max Ash Content wt.% 0.05 max Description: GD-9H SERIES are water white resin. C9 hydrogenaed petroleum resin , The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA),  Styrene-Butadiene-Styene block copolymer(SBS),Styrene-Isoprene-Styene block copolymer(SIS).
C9 hydrogenated hydrocarbon petroleum resin Chemical name: c9 hydrogenated petroleum resin Physical properties: it is produced through the process of refinement, isolation, polymerization and molding with the raw material of hydrocarbon resin c9 which is the by product from the ethylene fragment. The product is white granular, aromatic resin, which is easily soluble in organic solvents such as benzene and toluene etc. It has good compatibility, thermal stability, light stability, good water resistance and chemical resistance. Product specification: Test item C9 hydrogenation # 100 Test method Appearance White granular Eyeballing Softening point(°c) 95-120 Gb/t4507(ring&ball) Acid value(koh mg/g) =1.0 Gb2895 Color gardner (ga) 0-1 Astmd-1544 Melt viscosity(200°c)cps =400 Astmd-3236 Insoluble (vol%) ------ Ash content
Dear Sir: We are Henan G&D Chemical Products co.,ltd,we manufacture all kinds of petroleum resins. Such as C5 petroleum resins,C9 petroleum resins,hydrogenated petroleum resins,DCPD petroleum resins. If you are interested in our resins,Welcome to contact Gloria.
1101 c5 petroleum resin by-product between the ethylene-aliphatic-pentadiene through the catalytic polymerization of a thermoplastic resin, a low molecular weight, light-colored thermoplastic hydrocarbon resins, natural rubber, butyl rubber, sis polybutene, low density polyethylene and a random polypropylene excellent compatibility. Enhance tack and adhesion. Used in hot melt adhesives, pressure sensitive adhesives, seals and so on. 25kg/bag
Petroleum resin is applied to road marking paints, enhance the coating toughness, hardness and adhesion, and form a smooth finish. Dryness has improved significantly. Features: Color light; good liquidity; high wear; uniform filler dispersion, not settlement Weather and strong; drying speed; stain and strong 25kg/bag
Alx™-1102 c5 petroleum resins resin, c5 petroleum resin finishing is a widely used in tire rubber compounding, and natural rubber (nr), synthetic rubber, polyethylene, sis, sebs, eva, etc. Good compatibility with the natural increase adhesive resin (such as: terpene, rosin and its derivatives) compatibility is also good. Kneading the rubber can be used: tackifier, reinforcing agents, softeners, fillers 25kg/bag
Alx, -1204 petroleum resins from aliphatic c5 fraction after separation and purification concentrated piperylene to catalytic polymerization of a synthetic resin, a low molecular weight, thermoplastic hydrocarbon resin is light, can be provided with natural rubber, a butyl rubber , sis polybutene, atactic polypropylene, low density polyethylene, and good compatibility. Hot melt adhesives, Pressure sensitive adhesives, Seals 25kg/bag
Alx -1100 resin is thermoplastic, low molecular weight, aliphatic c5 resin. From mixed monomers of petroleum origin, characterized by its light color, excellent balance of tack and of adhesive and cohesive properties, heat resistance Hot melt adhesives Packaging Pressure sensitive adhesives Solventborne adhesives Tapes and labels 25kg/bag
En590, jeta1 and d6.
hydrogenated C9 hydrocarbon resin which compete and substitute C5 resin in Hot Melt Adhesive and Road marking paint
Jet a1, en590 diesel, crude oil .Connect buyers and sellers
HYDROGEN PEROXIDE 35%, 50%, 60% HS Code: 284700 Chemical name: Hydrogen dioxide solution Chemical Formula: H2O2 Packaging: IBC, 35 kg drum, 250 kg drum Appearance: Pale blue color Hydrogen peroxide (H2O2) is a chemical compound composed of two hydrogen atoms and two oxygen atoms. It is a clear, colorless liquid that is slightly more viscous than water. Hydrogen peroxide is often used as a mild antiseptic and bleaching agent. It has strong oxidizing properties and is commonly used as a cleaning agent, disinfectant, and as a bleaching agent for hair and teeth. In its pure form, hydrogen peroxide is unstable and decomposes into water and oxygen gas readily. It is also used in various industrial processes, including the production of chemicals, as a propellant in rocketry, and in the treatment of wastewater. As Ark Global Kimya, we do Hydrogen Peroxide wholesale and export in Turkey
Specification: Softening Point()ï¼? 80-90 90-100 100-110 110-120 Color(Gardner in 50% toluene),â?¤ 8-18 8-18 8-18 8-18 Ash(%),â?¤ 0.08 0.08 0.08 0.08 Acidity(mgKOH/mg),â?¤ 0.6 0.6 0.6 0.6 Recommended Application Adhesive Paint, Tyre Rubber Adhesive, Tire Rubber Adhesive, Tyre Rubber Application: 1. Used in Hot melt adhesive(HMA) and Solvent based adhesive(SBA) as tackifier resin 2. Solvent based paint 3. Printing Ink 4. Rubber Compounding 5. Asphalt emulsion mixtures Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Product description: C9 petroleum resin has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance. It is chemically stable to acid and alkali, and has the characteristics of good viscosity adjustment and thermal stability. C9 petroleum resin is generally not used alone, but as an accelerator, regulator, modifier and other resins. Application areas: 1. Paint The paint mainly uses C9 petroleum resin with high softening point. The addition of petroleum resin to the paint can increase the gloss of the paint and improve the adhesion, hardness, acid and alkali resistance of the paint film. 2. Tires and rubber Tires and rubber mainly use low softening point C9 petroleum resin. This kind of resin has good mutual solubility with natural rubber particles and has no major influence on the rubber vulcanization process. The addition of petroleum resin to tires and rubber can increase viscosity, strengthen, and soften, and the cost is low. 3. Adhesive industry C9 petroleum resin has good adhesion. The addition of petroleum resin to adhesives and pressure-sensitive tapes can improve the adhesive's adhesion, acid resistance, alkali resistance and water resistance, and can effectively reduce production costs. . 4. Ink industry Petroleum resins for printing inks are mainly high softening point petroleum resins. The addition of petroleum resin to the ink can achieve the effects of color development, quick drying, brightening, and improving printing performance. 5. Others: The resin has a certain degree of unsaturation and can be used as a paper sizing agent, plastic modifier, etc.
Greetings, my name is Sandra Moses-Adams, Owner of Moses Enterprise, a Sourcing Agency located in the USA. I am currently working with a dedicated, reliable vetted Fuel Reseller that is located in the USA and have been in business for 19 years, If your Buyer is looking for EN590, A1Jet Sour Crude or JP-54 Fuel our Sellers are vetted and ready to supply your requirements. I have added 1 SOP & pricing below for you to review, but we have others. If you would like to discuss your request with the Seller Mandate, please reply with your LOI and I will open a WhatsApp group for you to engage. If the call is to both satisfactions, then the SM will arrange a Zoom call with the Seller to discuss your requirements. Sandra Moses-Adams / Sourcing Agent Moses Enterprise 1 LLC James Bear / Facilitator J&B Oil & Gas Consulting PH/WhatsApp: 1-423-297-4656 Jet Fuel A1 Discount: $5.00 off Platt's US GCP Platts code: PJABPOO TERMS: Buyers issue LOI or Purchase Order to ITOE ITOE issues CI buyer signs CI and returns to ITOE ITOE issues COA to the buyer or the buyer contacts Sabolt to do physical verification If the buyer chooses not to do physical verification, then the buyer contacts the Refinery for verification Quantity: circa 2,025,000 Terminal Pajaritos FOB Port of Veracruz $1.00 Fees Total Both sides Open All export taxes paid by the seller After verification buyer deposit funds in attorney escrow account Buyer sends Q88 Seller allocate Lycan window for buyer to pick up product at refinery Terminal Buyer can also go to port to verify loading of ship After loading seller issue another Saybolt report Price is 6/5 gross/net Jet A1
1. Product Introduction: This product is belong to C9 category. It has the properties of good mutual solubility, water resistance, ethanol resistance and chemical resistance. It has good chemical stability over acid and alkali, good adhesive strength and good thermal stability etc. 2. Application: This product is suitable for paint.
Product Name: Petroleum Resin Place of Origin: China Features: 1) Paints: Paints mainly use C9 petroleum resins, DCPD resins and C5/C9 copolymerized resins with high softening points, petroleum resins are added to paints can increase the final finishes of paints, the adhesiveness of paint films and the hardness. Resistance to acid and alkaline. 2) Rubbers: Mainly use C5 petroleum resins, C5/C9 copolymerized resins and DCPD resins with low softening points, these kinds of resins have very good mutual solubilities with natural rubber particles, No affect to the sulphurization of rubber. Rubbers added with petroleum resins will increase the strength, adhesiveness and softening property. 3) Adhesives: Petroleum resins have very good adhesiveness, they can increase the adhesiveness of adhesives, resistance to acid, alkaline and water. Subsequently they will reduce the production cost. 4) Printing inks: Usually, the C9 petroleum resins and DCPD resins which hare high softening point are used for printing inks, they hare color spreading, fast dry and brightening effects and will increase the printing property. Packing: 25kg/bag