Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.
Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.
Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.
Api 16a standard 2 7/8" sucker rod bop 1. Size: 2 7/8" 2.Pressure: 3000 psi 3. Use for 1 1/4' rod 2 7/8" sucker rod bop Api standard 2 7/8" sucker rod bop Api 16a standard 2 7/8" sucker rod bop Api standard 2 7/8" sucker rod bop Api standard sucker rod bop 1. Size: 2 7/8" 2.Pressure: 3000 psi 3. Use for 1 1/4' rod Api standard 2 7/8" sucker rod bop Suck rod bop 1.Description of suck rod bop The sucker rod blowout preventer is used to prevent oil and gas from leaking, and ensure washing wells and etc 2.Specification of suck rod bop 1.Pr1, psl1-3, temp:pu, aa-ff 2.Connection:welding , thread, 3.Api specification Blow out preventor 2 â?? 7/8, 3000 psi, 1-1/4rod
API 16A Standard 2 7/8" sucker rod BOP 1. size: 2 7/8" 2.Pressure: 3000 PSi 3. Use for 1 1/4' rod 2 7/8" sucker rod BOP API standard 2 7/8" sucker rod BOP
Product Description A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company. Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel. Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use. Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production. And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells. API 11B OILFIELD NORRIS SUCKER ROD FROM CHINESE MANUFACTURERAPI 11B OILFIELD NORRIS SUCKER ROD FROM CHINESE MANUFACTURER The specifications and main parameters SIZE (in) ROD D.(in) THREAD D. (in) LENGTH (ft) OUTSIDE DIAMETER OF PIN SHOULDER(mm) LENGTH OF PIN(mm) LENGTH OF WRENCH SQUARE(mm) WIDTH OF WRENCH SQUARE(mm) 5/8" 5/8" 15/16 2 4 6 8 10 25 30 31.75 31.75 �?�31.75 22.23 3/4" 3/4" 1-1/16 38.10 36.51 25.40 7/8" 7/8" 1-3/16 41.28 41.28 1" 1" 1-3/8 50.80 47.63 �?�38.10 33.34 1-1/8" 1-1/8" 1-9/16 57.15 53.98 �?�41.28 38.10 product show : Company Information Our Services For more information, you can contact me : Looking forward to cooperating with you!
Sucker rod Steel sucker rod is one of the major equipment for oilfield. As an api licenced product, our sucker rod include grade d, hl, hy Our sucker rod is made of fine alloy steel. It is featured by high strength, better plasticity and long service life after heat treatment. 1) material: 20crmo, 35 crmo 2) standard: api spec 11b 3) grade: d, hl, hy 4) main specification: 5/8" , 3/4", 7/8" , 1", 1 1/8" 5) length: according to your request 1000 pcs/crate, 750kg, 1200*720*360mm
Sucker rod is an important part of sucker rod pumping equipment. In the process of oil production, sucker rod is used to transfer energy and the ground power or movement to the underground pump. Products we provide: (1) steel rod and pup joint with class of Cã??Dã??Kã??KDã??HX ( eq.N97 )ã??HY, hollow rod, hollow torque rod, solid torque rod and solid anti-corrosion torque bar of b, drive rod, anti-eccentric wear rod, pump pull rod, weight rod, solid polish rod, hollow polish rod and special polish rod, etc. (2) foot ruler of class of Tã??KDã??SM and small hole coupling, adapter coupling, coupling of bidirectional protection against eccentric, polish rod coupling and coupling of ultra high strength. (3) rod seal of follow - up adjusting polarizing, detach preventer of high strength for sucker rod, sucker rod centralizer, rod clamp, etc.
Specifications API 16A Standard 2 7/8" sucker rod BOP 1. size: 2 7/8" 2.Pressure: 3000 PSi 3. Use for 1 1/4' rod 2 7/8" sucker rod BOP API standard 2 7/8" sucker rod BOP API 16A Standard 2 7/8" sucker rod BOP API Standard 2 7/8" sucker rod BOP API Standard sucker rod BOP 1. size: 2 7/8" 2.Pressure: 3000 PSi 3. Use for 1 1/4' rod API Standard 2 7/8" sucker rod BOP Suck rod bop 1.description of suck rod bop The Sucker Rod Blowout Preventer is used to prevent oil and gas from leaking, and ensure washing wells and etc 2.Specification of suck rod bop 1.PR1,PSL1-3,TEMP:PU,AA-FF 2.Connection:welding ,thread, 3.API specification BLOW OUT PREVENTOR 2 â?? 7/8 , 3000 PSI, 1-1/4 ROD
Specifications API 16A Standard 2 7/8" sucker rod BOP 1. size: 2 7/8" 2.Pressure: 3000 PSi 3. Use for 1 1/4' rod 2 7/8" sucker rod BOP API standard 2 7/8" sucker rod BOP API 16A Standard 2 7/8" sucker rod BOP API Standard 2 7/8" sucker rod BOP API Standard sucker rod BOP 1. size: 2 7/8" 2.Pressure: 3000 PSi 3. Use for 1 1/4' rod API Standard 2 7/8" sucker rod BOP Suck rod bop 1.description of suck rod bop The Sucker Rod Blowout Preventer is used to prevent oil and gas from leaking, and ensure washing wells and etc 2.Specification of suck rod bop 1.PR1,PSL1-3,TEMP:PU,AA-FF 2.Connection:welding ,thread, 3.API specification BLOW OUT PREVENTOR 2 â?? 7/8â?� , 3000 PSI, 1-1/4â?� ROD
Many sizes of hollow rods for different usages. Its steel degree is high, and it can withstand strong torque and tension. Mechanical properties are H-grade level. When it is used in deep well, the performance is more reliable with the use of three step assemblage. It can come to the depth of 3,000 meters.
Hollow sucker rod
annular blowout preventer blowout preventer ,cameron double ram bop,BOP,double ram blowout preventer ,annular blowout preventer ,BOP,double ram blowout preventer annular blowout preventer cameron double ram bop blow-out preventer (BOP) BOP is shut in the well for oil testing, workover, well completion and operating process to prevent the blowout accident, totally enclosed and semi-closed two functions into one, has a simple structure, easy to operate, resistant to high-pressure characteristics is used to prevent blowouts safety oilfield sealing wellhead. Oil drilling, installed at the wellhead casing head, used to control the high pressure oil, gas, water blowout. Wells of oil and gas pressure is high, the BOP can be the wellhead closed (shut). The shutter has four, alternatively bullied invaded mud, increasing the pressure of the borehole fluid column, so as to suppress the high-pressure oil and gas discharged from the drill pipe is pressed into the heavy mud. Its type sub-ordinary blowout preventer, of universal blowout preventers and rotating blowout preventer. Ordinary BOP ram with full-and semi-closure, full closure type blowout preventer can seal the entire wellhead; semi-sealed shut wellhead annular cross-section of drill pipe exists. Universal BOP can start in case of emergency to cope with any size drill and empty wells; the rotating BOP side spray edge drilling operations. In addition to the outside two ordinary BOP, plus Universal BOP, rotating BOP, so three or four combinations installed at the wellhead deep drilling often. [1] annular BOP Annular Blowout Preventer
1, api 16a ram bop 2, bore dia.: 7 1/16"-26 3/4" 3. Pressure: 14mpa to 105mpa 4. Forged and casting Ram blowout preventer Hydraulically/manual operated locking mechanism. Secondary seal. Flat and side door structure or hydraulic control type flat door structure. The side door and shell are connected by triple hinges. Open and close the valve in sequence by using pressure bar(c type ram bop) The guide frame is set at the end of the side door, when the side door is opened, the ram can be pulled out along the guide rail and the ram can be replaced(d type ram bop) Pistons indicator. Concealed oil way. The cavity of ram is ellipse. Hydraulic pressure: 1200~1500psi(8.4~10.5mpa) Hydraulic connection: npt1 Working temperature: -29 Media: oil gas & drilling fluid containing h2s Ram size and type : series size pipe ram, reducing ram and cutter ram.
1. Standard: API 16A 2. Competitive price with high quality. 3. Prompt delivery 4. Size range: 7 1/16"-21 1/4" 5. Pressure range: 2000-15000psi 800kgs
Sucker rod BOP is used to prevent the oil and gas from leaking, and ensure the washing wells and etc, its max working pressure is 1500psi and its used for 1/2to 1-1/8sucker rod. Sucker Rod Bop
Specifications 1, api 16a ram bop 2, bore dia.: 7 1/16"-26 3/4" 3. Pressure: 14mpa to 105mpa 4. Forged and casting Ram blowout preventer Hydraulically/manual operated locking mechanism. Secondary seal. Flat and side door structure or hydraulic control type flat door structure. The side door and shell are connected by triple hinges. Open and close the valve in sequence by using pressure bar(c type ram bop) The guide frame is set at the end of the side door, when the side door is opened, the ram can be pulled out along the guide rail and the ram can be replaced(d type ram bop) Pistons indicator. Concealed oil way. The cavity of ram is ellipse. Hydraulic pressure: 1200~1500psi(8.4~10.5mpa) Hydraulic connection: npt1 Working temperature: -29 Media: oil gas & drilling fluid containing h2s Ram size and type : series size pipe ram, reducing ram and cutter ram. 900kg
Self-controlled electrical heating sucker rod is a new generation of electric heating rod of the latest products. The product has high heat productivity, and its temperature is self-controlled. Polymer PTC (positive temperature coefficient of resistance) will be installed within the hollow rod as the semiconductor material thermal heating elements. Both ends (male and female) are sealed by fire resistant PTFE material. The temperature of this kind sucker rod can be adjusted according to the complexity of current automatically. Within the entire pitshaft oils temperature is uniform, which saves energy without destroying oil properties. The rod is designed sectional. There is a fuse in every installation of rods, which can protect it in the case of partial flow. Without prejudice to the overall work.
API RH20 Sucker Rod Hooks for Oilfield Sucker Rod Hoisting Product Description Sucker Rod Hook is one of the hoisting equipment for sucker rods. It is suitable for all depths and operating conditions complete with single-hand latch construction and safety ring. It is safe and dependable enough. The sucker rod hook is designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Features: (1) . API certified handling tools for well drilling. (2) . Load capacity from 20 tons to 35 tons. (3) . Easy for operation for safety use. (4) . Short on delivery. (5). Quality assured with national best standard. Technical Parameters Model Rated Capacity (short tons) Length (mm) Hook Open Dimension RH 20 20 (180KN) 488 1 7/8 in (47.6mm) RH 25 25 (225KN) 494 RH 25L 25 (225KN) 798 RH 35 35 (315KN) 960 API RH20 Sucker Rod Hooks for Oilfield Sucker Rod Hoisting Photo View API RH20 Sucker Rod Hooks for Oilfield Sucker Rod HoistingAPI RH20 Sucker Rod Hooks for Oilfield Sucker Rod HoistingAPI RH20 Sucker Rod Hooks for Oilfield Sucker Rod HoistingAPI RH20 Sucker Rod Hooks for Oilfield Sucker Rod HoistingAPI RH20 Sucker Rod Hooks for Oilfield Sucker Rod Hoisting Packaging & Shipping Standard export packing or according to client's requirements. Shipping according to client's requirements. API RH20 Sucker Rod Hooks for Oilfield Sucker Rod HoistingAPI RH20 Sucker Rod Hooks for Oilfield Sucker Rod Hoisting Our Services With years experience serving clients from more than twenty countries, to provide you best service and competitive price. Quality Control API RH20 Sucker Rod Hooks for Oilfield Sucker Rod Hoisting
Sucker rods are manufactured according to API 11B Specifications. Currently, we market 3 types of API sucker rods Grade D Alloy and Grade D Special which are formulated from different alloysï¼?AISI 4130 (Grade D), AISI 4142 (Grade D) and AISI 4720 (Grade KD). Manufacturing Process: 1. Rod Bar The incoming rod bars are inspected for any damage, fault and discontinuities.Before arranging the rod bars for production process, carry out chemical composition testing, dimensional inspection & surface quality inspection. High quality standard is maintained at various stage inspections. 2.Manufacturing Rod bars are manufactured from hot rolled alloy steel. Rod bars are machine straightened and cold drawn to the required size. The rod bar ends are hot forged according to API designed sizes. The rods are then heat treated over the full length.As per requirement of mechanical properties, the rods are normalized and tempered to the specified level or quenched and tempered to the required hardness and strength. Care is taken to achieve metallographic structure with no residual stresses in the rod.A sample specimen is cut from the heat treated material and is tested for ultimate tensile strength, yield strength and elongation. The rod is then again checked for straightness. The forged ends are properly aligned with its body. Rods are cleaned by shot-blasting to remove any scale and oxidation. The forged ends are machined on C.N.C. Lathe machines as per API dimensions and checked with API approved gauges.
