An Amphibious Excavator is specially designed to work in swampy, wet land and shallow water. Our well designed Amphibious Undercarriages provides great mobility to work on soft terrains and swampy area.
Standard package of Amphibious Excavator is attached with long reach arm c/w conventional excavator bucket.
Amphibious Undercarriage has proven to work effectively on the following areas:
1) Swamp land clearing at mining, plantation and construction area.
2) Deepening of canal, river channel and river mouth.
3) Building bund for flood prevention and land reclamation.
4) Building bund wall for fish, shrimp ponds and salt making industry.
5) Clearing of lakes, ponds and water reservoir.
6) Digging trenches for oil & gas piping installation.
7) Clearing obstacles at landslide and flood hit area.
8) Water irrigation at paddy field and plantation.
Sunton amphibious undercarriage for drill rig
The midsection is flat, no sleeve ring is required. Load capacity from 40 to 50 ton. The rig will be used in deeper water. The pontoon size shall be l*w*h=11m*3m*2m and the steel wall plate of the pontoon is reinforced and much thicker than the normal pontoons in order to stand the large torque force during the drill rigs being working. The weight of the undercarriage reaches about 40tons and the total buoyancy will be 90tons at least to provide a payload about 50 tons.
Underwater weed harveste
Each pontoon will have 4 chains tracks being equipped with special material wearing plate and 2 sets doosan tm60vc motors. Main specification is as below:
The lifting load of the crane is 10tons.
Water hyacinth harvester
The platform payload is also 10tons.
Pipe is made of steel, length 12m.
Total buoyancy of the platform will be 41.3tons.
The pontoon size will be l*w*h=10.2m*1.8m*1.8m, doosan tm60vc motors.
Complete new type tracks and chains system for heavy duty applications.
Suitable for long distance travelling on both swamp lands, solid lands and deep water.
Vibration chute for gold mining
Pontoons are treated with special wearing materials and paintings from wearing and corrosions from seawaters.
Standard Amphibious Undercarriages- Small and Medium Size
Product Features
1) Pontoon Construction
High Strength Weathering Cor-Ten plate steel is used in the fabrication of the pontoons. Cor-Ten steel is marine grade and corrosion resistance steel that has 5 to 8 times the atmospheric corrosion resistance and 20% more tensile strength than similar size 16Mn Q345B structural plate steel.
In the pontoon, there are many supporting steel bars which reinforcing pontoon strongly. Each pontoon has 2 bulkheads, providing 3 independent watertight compartments with inspection plugs located on the outside of the pontoons. Each compartment of the pontoon has 1x25mm drain hole at bottom and 1x25mm inspection hole on side of pontoon near the top. Service man manholes on each pontoon are optional, made for easy maintenance and field servicing.
Pontoons are shot blasted to ensure that the surface is thoroughly clean and free from contaminants and rust. In addition, this process presents the steel with a surface texture that provides excellent adhesion of prime coat of paint. Interior Metal Finish is coated with Zinc chromate rust inhibitor or Rust Inhibitor priming paint. Exterior Metal Finish is 2 part organic zinc epoxy base coat Primer, Epoxy topcoat.
The bottom of the pontoon is reinforced for rough terrain operations. Especially the chains runway channels or paths are made of 3-layers steels, 2-part HD70 high tension steel plus the spring steel wear plate, which highly prolong the pontoon's service life.
SUNTON Pontoon shape is quite uniquely designed that could reduce the resistance of the water or mud during its moving.
The hydraulic hoses or pipes are shielded with steel from being damaged during operations.
2) Track Chains and Track Shoes
Each SUNTON pontoon could be equipped with two, three or four strands of heavy-duty track chains. The chain link pads and track pads are all made of high tension steel HD70. The design and size of SUNTON track chain rollers and pins or bushes are all different from others with larger sizes. Tensile strength of link pads could reach 680Mpa. The chain roller paths/channels are lined with high strength abrasion-resistant steel and spring steel that matches the hardness of the chain rollers.
Track shoes/cleats/pads are fabricated with heavy duty steel, which makes it less prone to cracking, due to the wider spread between yield strength and ultimate tensile strength. Track pad steel tensile strength reaches 620Mpa. Customer could select much harder steels, whose tensile strength could reach 860Mpa, but cost is higher. Track shoes are box-shaped, welded or bolted to the chains and fully covering the pontoons. UHMW wear plate or HDPE or HDMP plate, is the optional design to meet the challenge of wearing when machine often moves on stiff or tough ground. Usually there are two Ultra High Molecular Weight trackwear pads per cleat.
Undercarriage
Bulldozer Undercarriage, Bulldozer Final Drive, Bulldozer Chassis, Bulldozer Boom For Sale
HBXG can supply bulldozer undercarriage, bulldozer final drive, bulldozer chassis and bulldozer boom, etc. If you have any questions about our products or service, welcome to contact us.More information please view here.
Material Steel
Excavator Under carriage Parts
Mini excavator Under carriage parts
Track Chain,Rollers,Sprockers and idler
Top roller,Bottom roller,Track Shoe,Track Shoe Bolt
Model: rt series
Type: rubber tracks
Load capacity: 0.8-6 ton
Model: st series
Type: steel tracks
Load capacity: 3-50ton
Our subsidiary company, bonny tracked undercarriage factory, is specialized in the research and development of rubber and steel tracked undercarriage. Since the establishment of bonny, it keeps the whole world in view and blaze steadily new trails. By now, we have developed various tracked undercarriage systems and the load capacity is from 0.5 ton to 50 ton. It has been widely applied in drilling machines (core drill, horizontal directional drilling rig, belt engineering drill, and engineering rig), engineering machines, mining, colliery, agricultural and gardening machines. Meanwhile, we have a lot of experience engineers who can provide you technical support and technical consultancy to meet your needs
Special features:
the track motor can be fixed displacement or variable displacement concealed planetary gearbox and hydraulic motor, such as nabtesco (japen), brevini (italia). If you need, we can also provide track motor made by our own factory.
the beam is made of q345b with high loading capacity.
it can also be designed and manufactured on customers request.
it is widely applied in all kinds of mini- drilling rig, mini-excavator, lawn mower, aerial working platform and construction engineering machines.
- Pins and bushings are precision-machined, induction-hardened, and sealed from abrasives.
- Track links are forged from a special boron-steel alloy and deepinduction-hardened.
- Front idlers are induction-hardened on the tread for a long life.
- Carrier rollers are induction-hardened.
- Specification
Overall Length : 98.3~147.8 inch
Track Height : 24.4~28.7 inch
Sprocket Pitch Diameter : 18~23 inch
Carriage Weight : 3,042~4,630 lb
Excavator Dumper : 12,125~29,762 lb
Drill Rig with Outrigger : 19,400~47,620 lb
Final Drive Torque : 5,618~13,347 lbf.ft
Travel Speed : 2.1~5.3 kmf.hour
Takeuchi TB219. Year 2023. 1206 hours. 2 ton. Full cab. Heater. Two speed tracks. Piped for hammer. Quick hitch and 2 new buckets. Extending undercarriage. Good tracks. THIS IS IN Excellent condition.
Material:thermoplastic
Model no.: win-240607
Voltage range :5--26
Max load current: 1.2 a
Max static lift : 7 m
Max flow : 600 l/h
Rate power consumption : 28.8 w
Another function:submarine
Excavator Undercarriage Sprocket our track sprockets wheel is high quality spare parts of undercarriage parts are applicable for TATA Hitachi, Volvo, Sany, Caterpillar, XCMG, Kubota, Hyundai, L&T-Komatsu, JCB, Kobelco and all other Excavator are also ready in stock to offer the following attributes
HITACHI Excavator Undercarriage Parts
A&S UNDERCARRIAGE CO., LTD. is an experienced and professional company specialized in providing undercarriages and undercarriage parts for excavators and bulldozers .
We supply undercarriage parts for all HITACHI excavators.
EX270-5 LC undercarriage parts
EX27U undercarriage parts
EX285-5 LC undercarriage parts
EX300 undercarriage parts
EX300 LC undercarriage parts
EX300 LCH undercarriage parts
EX300-2 undercarriage parts
EX300-3 LC undercarriage parts
EX300H undercarriage parts
EX30-2 undercarriage parts
EX330-5 undercarriage parts
EX330-5 LC undercarriage parts
EX3500 undercarriage parts
EX3500 undercarriage parts
EX3500-3 undercarriage parts
EX3500-3 undercarriage parts
EX35-2 undercarriage parts
EX35U undercarriage parts
EX400 LC undercarriage parts
EX400 LC undercarriage parts
SUPER undercarriage parts
EX400 LCH SUPER undercarriage parts
EX400 SUPER undercarriage parts
EX400-3 undercarriage parts
EX400-3 LC undercarriage parts
ZW220 undercarriage parts
ZW250 undercarriage parts
ZW310 undercarriage parts
ZX110 undercarriage parts
ZX120 undercarriage parts
ZX120-3 undercarriage parts
ZX130 undercarriage parts
554 Amphibious Undercarriage Suppliers
Short on time? Let Amphibious Undercarriage sellers contact you.
