Led tact switch series main technical parameters:
Circuit :spst
Current rating :50ma
Voltage rating :12vdc
Dielectric withstanding voltage:250vac for 1minute
Contact resistance :100 max.(initinal)
Insulation resistance :100 min.
Operating force :200 add/reduce 50gf 300 add/reduce 50gf
Total travel :0.25mm±0.1mm
Operating life :100000 cycles min
Solder specifications :260 for 5 seconds
Function :momentary
Operating temperature :+10-+60
Illuminated:led (red/green/blue/green/white)
Electronic components motorcycle parts and auto parts like ic, adapter, connector, sensor, module, fuse, transformer, capacitor, resistor, led light, diode, triode, switch, buzzer, potentiometer, relay and spark plugs..
Led tact switch series main technical parameters:
Circuit :SPST
Current rating :50mA
Voltage rating :12VDC
Dielectric withstanding voltage:250VAC for 1minute
Contact resistance :100 Max.(Initial)
Insulation resistance :100 Min.
Operating force :200 add/reduce 50gf 300 add/reduce 50gf
Total travel :0.25mm±0.1mm
Operating life :100000 cycles Min
Solder specifications :260 for 5 seconds
Function :Momentary
Operating temperature :+10-+60
Illuminated: LED (red/green/blue/green/white)
1-metal dome at high quality
2-ISO90001,ROHS,SGS
3-factory price
4-OEM,ODM welcomed .
Metal Dome:
1.Material :Stainless steel
2.Avaliable for enhancing tactile feeling
3.Carrier: PET
4.Wth or without single side adhesive spacer
5.With silicone adhesive for rubber keypads
6.More than 10,000,000 life cycles
7.Avaliable in various metal dome: round, triangle, four Legs and oblong shape
8.Customized designs are welcome.
Design considerations include dome size, material composition, thickness, and mating circuit design which determine the characteristics of tactile feel, actuation force, actuation travel and contact resistance. We can supply different sizes and variations of metal domes, and has extensive experience in metal dome array applications to assist in optimizing designs for every requirement .
plastic bag/carton/according to your request.
2427 6X6 Led Lluminated Tact Switches Suppliers
Short on time? Let 6X6 Led Lluminated Tact Switches sellers contact you.
Led tact switch series main technical parameters:
Circuit :SPST
Current rating :50mA
Voltage rating :12VDC
Dielectric withstanding voltage:250VAC for 1minute
Contact resistance :100 Max.(Initial)
Insulation resistance :100 Min.
Operating force :200 add/reduce 50gf 300 add/reduce 50gf
Total travel :0.25mm±0.1mm
Operating life :100000 cycles Min
Solder specifications :260 for 5 seconds
Function :Momentary
Operating temperature :+10-+60
Illuminated: LED (red/green/blue/green/white)
Snap-in type, can be mounted directly on PC board.
Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy.
Available with anti-ESD ground terminal.
Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.
Led tact switch series main technical parameters:
Circuit :SPST
Current rating :50mA
Voltage rating :12VDC
Dielectric withstanding voltage:250VAC for 1minute
Contact resistance :100 Max.(Initial)
Insulation resistance :100 Min.
Operating force :200 add/reduce 50gf 300 add/reduce 50gf
Total travel :0.25mm±0.1mm
Operating life :100000 cycles Min
Solder specifications :260 for 5 seconds
Function :Momentary
Operating temperature :+10-+60
Illuminated: LED (red/green/blue/green/white)
Tact Lever Switches is applied to low current circuit push switch for electronic equipment.
Appearance of the Switch shall have good finishing, and no rust, crack or plating failures.
Operating force of a static load shall be applied to the tip of actuator in operating direction.
Robustness of terminal of a static load of 2N(200gf) shall be applied to the tip of terminal
in a desired direction for 1min. the test shall be done once per terminal.
Tact Switch MT 1101 S is applied to low current circuit tactile switch for electronic equipment.The standard test conditions shall be 5 ~ 35 degree Celsius in temperature.
45 ~ 85% RH and 860 ~ 1060 m bar in atmospheric pressure.
Should any doubt arise in judgement, tests shall be conducted at 20±2 degree Celsius, 60±5% RH
Tact Switch MT 1101 SE is applied to low current circuit tactile switch for electronic equipment.
Storage temperature range 96 hours maximum for continuous storage over a range
The standard test conditions shall be 5 ~ 35 degree Celsius in temperature.
Tact Switches MT 1101 Contact resistance applying a static load twice the actuating force to the center of the stem, measurements shall be made with a 1 kHz small-current contact
resistance meter.
Insulation resistance measurements shall be made following application of DC 100 V
Potential across terminals and frame for one minute
H48 drone rc quadcopter Main Features:
2.4GHz control system:
Ensures the stronger anti-interference performance and powerful signal
360-degree flip:
The quadcopter will flip forward / backward / leftward / rightward according to your instructions
6 axis gyro:
Provides the best stability during indoor and outdoor flight
Colorful LED light:
The drone will shine in the darkness, shows you the right flying direction and gives you a special look
Super mini design:
Easy to carry, takes it into your pocket and enjoys flight anywhere anytime
Tumbling skill:
It can realize 3D tumbling in four directions with colorful LED lights
Speed switch:
High-low speed modes can be changed by the transmitter
Tact Switch MT 1101 V Contact resistance applying a static load twice the actuating force to the center of the stem, measurements shall be made with a 1kHz small-current contact
resistance meter.
Insulation resistance measurements shall be made following application of DC 100V potential across terminals and frame for one minute.
Tact Switches MT 1102HT Contact resistance applying a static load twice the actuating force to the center of the stem, measurements shall be made with a 1kHz small-current contact resistance meter.
Insulation resistance Measurements shall be made following application of DC 100V Potential across terminals and frame for one minute
Tact Switches MT 1102 VS is applied to low current circuit tactile switch for electronic equipment .Contact resistance measured DC 5 V 1 A or by ohmeter allowing a small current at 1 kHz with a load of twice of the Actuating force
Insulation resistance DC 100V is applied between terminals and between terminals and cover for 1 minute ± 5 seconds
Tact Switches MT 1101 U is applied to low current circuit tactile switch for electronic equipment.
Contact resistance measured DC 5V 1A or by ohmeter allowing a small current at 1 kHz with
a load of twice of the Actuating force
Insulation resistance DC 100V is applied between terminals and between terminals and cover for 1 minute ± 5 seconds
Product Name:Tact Switchï¼?160gf 260gf strength double button with bracket 9.1*7.3*(1.4,3.4,6.4,7.9,13.4)ï¼?
Place of Origin:Guangdong,China
Model Number:TC-1122DD-X-X
Contact Rating:50mA 12VDC
Contact Resistance:100m max.
Insulation Resistance:100m min.500V DC
Dielectric Strength:250V AC/1 minute
Travel :0.25mm
Operating Temp.:-25C~+70C
Storage Temp:-30C~+80C
More product details please feel free to contact us.
FAQ:
Q1. Are you a factory or trading company?
A: We are a factory, we can guarantee our price is first-hand, very cheap and competitive. Q2. When can I get the quotation ?
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority. Q3. You can provide some samples for me?
A: Yes, we can provide free samples to you, but the freight need you to bear.
Q4. I am a small wholesaler, do you accept small order?
A: It's no problem if you are a small wholesaler, we would like to grow up with you together. Q5. What about the lead time for mass production?
A: Honestly, it depends on the order quantity and the season you place the order. The lead time of MOQ is about 10 to15 days. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country. Q6. How does your company do regarding quality control? A: Each year we have quality supervision department inspection, and issue inspection reports, each batch of goods will be strictly controlled, the company's internal will have qualityregulation, to ensure that every batch of products qualified and best quality.
Notice:
(1)due to our product range, many models, changes in prices of raw materials, the online prices are for reference.
(2) If your required products was not found in the shop, please consult our customer service, thank you for understanding and support!
2427 6X6 Led Lluminated Tact Switches Suppliers
Short on time? Let 6X6 Led Lluminated Tact Switches sellers contact you.
