Led tact switch series main technical parameters:
Circuit :spst
Current rating :50ma
Voltage rating :12vdc
Dielectric withstanding voltage:250vac for 1minute
Contact resistance :100 max.(initinal)
Insulation resistance :100 min.
Operating force :200 add/reduce 50gf 300 add/reduce 50gf
Total travel :0.25mm±0.1mm
Operating life :100000 cycles min
Solder specifications :260 for 5 seconds
Function :momentary
Operating temperature :+10-+60
Illuminated:led (red/green/blue/green/white)
Supplier: Japanese quality switchgear components, breakers, magnetic contactors, switches, pilot lights, pushbuttons, panel instrumentations, power management meter, protection relays, transformers, inverters, ups.
Universal Ceramic Honeycomb Catalytic Converter For Sale Catalytic converter is a device used to reduce the toxicity of emissions from an internal combustion engine.
This smd tact switch specifications: 1.Rating:dc 12v 50ma max 2.Travel:0.25mm 3.Force:100, 160, 250gf 4.Life:100, 160:100, 000cycles 250:50, 000cycles 6*6 height is available. Package:1000pcs/reel
Network Switch
Snap-in type, can be mounted directly on PC board. Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy. Available with anti-ESD ground terminal. Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.
Tact Lever Switches is applied to low current circuit push switch for electronic equipment. Appearance of the Switch shall have good finishing, and no rust, crack or plating failures. Operating force of a static load shall be applied to the tip of actuator in operating direction. Robustness of terminal of a static load of 2N(200gf) shall be applied to the tip of terminal in a desired direction for 1min. the test shall be done once per terminal.
Tact Switch MT 1101 S is applied to low current circuit tactile switch for electronic equipment.The standard test conditions shall be 5 ~ 35 degree Celsius in temperature. 45 ~ 85% RH and 860 ~ 1060 m bar in atmospheric pressure. Should any doubt arise in judgement, tests shall be conducted at 20±2 degree Celsius, 60±5% RH
Tact Switch MT 1101 SE is applied to low current circuit tactile switch for electronic equipment. Storage temperature range 96 hours maximum for continuous storage over a range The standard test conditions shall be 5 ~ 35 degree Celsius in temperature.
Tact Switches MT 1101 Contact resistance applying a static load twice the actuating force to the center of the stem, measurements shall be made with a 1 kHz small-current contact resistance meter. Insulation resistance measurements shall be made following application of DC 100 V Potential across terminals and frame for one minute
