5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. It s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing. The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%. Surface Advantages of 5052 Aluminum coils: 1. surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate. 2. The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%. 3. Allow the supplier to illuminate the profile longitudinally to a smooth surface. 4. Other requirements: There are demanders and suppliers to draw up their own. Application of 5052 Aluminum coils: 5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material. The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. Itâ??s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing. The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%. Surface Advantages of 5052 Aluminum coils: 1 - surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate. 2 - The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%. 3 - Allow the supplier to illuminate the profile longitudinally to a smooth surface. 4 - Other requirements: There are demanders and suppliers to draw up their own. Application of 5052 Aluminum coils: 5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material. The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on. Product Name : Aluminum coil Price range : $1000-$2000 Discounts are available for large orders Minimum order quantity : 1 ton Specifications Thickness 0.1-10mm, width 600-1500,or according to requirements Standard : ASTM, JIS, DIN, GB, Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880 Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. Product : certification ISO,SGS,BV,TUV, Processing Service : Welding, Drilling, Cutting, Bending, Stamping,Embossing Application : Roof , car building,curtain wall, Shelter ,oil tank,mould Packing : Wooden pallet or according to customer's request Lead time : 7 to 15 working days Payment terms : T/T ,LC Exporting country : Southeast Asia: Philippines, Vietnam, Laos Northern Europe: Finland, Sweden, Norway, Iceland South Africa: Zambia, Angola, Zimbabwe Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
* ASTM Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on. Product Name : ASTM Aluminum coil Price range : $1000-$2000 Discounts are available for large orders Minimum order quantity : 1 ton Specifications Thickness 0.1-10mm, width 600-1500,or according to requirements Standard : ASTM, JIS, DIN, GB, Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880 Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. certification : ISO,SGS,BV,TUV, Processing Service : Welding, Drilling, Cutting, Bendingï¼?Stamping,Embossing Application : Roof , car building,curtain wall, Shelter ,oil tank,mould Packing : Wooden pallet or according to customer's request Lead time : 7 to 15 working days Payment terms : : T/T ,LC Exporting country : Southeast Asia: Philippines, Vietnam, Laos Northern Europe: Finland, Sweden, Norway, Iceland South Africa: Zambia, Angola, Zimbabwe Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
* JIS Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on. Product Name : JIS Aluminum coil Price range : $1000-$2000 Discounts are available for large orders Minimum order quantity : 1 ton Specifications : Thickness 0.1-10mm, width 600-1500,or according to requirements Standard : ASTM, JIS, DIN, GB, Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880 Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. certification : ISO,SGS,BV,TUV, Processing Service : Welding, Drilling, Cutting, Bendingï¼?Stamping,Embossing Application : Roof , car building,curtain wall, Shelter ,oil tank,mould Packing : Wooden pallet or according to customer's request Lead time : 7 to 15 working days Payment terms : T/T ,LC Exporting country : Southeast Asia: Philippines, Vietnam, Laos Northern Europe: Finland, Sweden, Norway, Iceland South Africa: Zambia, Angola, Zimbabwe Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Aluminum coil plate and Aluminum foil hot-rolling strip The type of aluminum we have is 1050, 1060, 8011, 6063 1060 3003 5052 6061 7075.A380 ADC12 A390ZL101A ZL104 ZL109 ZL111 ZL205A ZL108 ZA12 4343 We can fluorocarbon paint and strip the aluminum coil into different widths, and the thickness of the aluminum foil ranges from 0.18-10mm. As well as can provide thermal insulation aluminum coil, color aluminum coil, with pattern aluminum coil, without viscosity, double-sided conductive high-quality aluminum. It can also be processed into different profiles. As a new type of metal material, aluminum alloy plate has been widely used in various fields in recent years. Its characteristics are in the following aspects: 1. Light weight and high strength. 2. Good corrosion resistance. 3. Good thermal conductivity. 4. Beautiful and practical. Aluminum foil and aluminum coil, as the two main forms of aluminum materials, are widely used in many industries. Although they are of the same origin, they differ in their characteristics and uses. Aluminum foil, known for its thin and flexible, thickness is usually less than 0.2mm, is the ideal choice for food packaging, electronics industry. The aluminum coil, with a thickness greater than 0.2mm, is known for its robustness and durability, and is often used in the construction field of roofs, wallboards and so on. In the field of application, aluminum foil shines in food packaging with its good sealing and toughness, such as the anti-paste and anti-drying when barbecuing and roasting chicken. The aluminum coil, because of its strength and hardness, has become an indispensable material in the construction field. Although both have the advantages of lightweight, easy processing and corrosion resistance, they also have disadvantages. Aluminum foil is thin and easy to tear, and aluminum rolls are difficult to bend and deform.
3003 aluminum coil is the most widely used aluminum alloy. It is made up of aluminum, copper, iron, manganese, silicon and zinc. It is commonly used because it has great resistance to corrosion and is moderately strong. The 3003 aluminum coil is 20% stronger than 1100 grade alloys because it is fused with manganese. Because it s not heat treatable, it has to be strengthened using cold working alone. The most common applications for the 3003 aluminum coil are for fuel tanks, sheet metal work and other types of projects that need a metal that is stronger than the 1100 series aluminum. In some cases, it is used for cooking utensils, refrigerator panels, gas lines, storage tanks, garage doors, builder s hardware and awning slats.
Product Description Aluminum plate is the thickness of above 0.2mm to below 500mm, more than 200mm width, length within 16m aluminum material called aluminum plate or aluminum sheet, below 0.2mm for aluminum,200mm width within the bar or bar. Aluminum plate refers to the rectangular plate made of aluminum ingot rolling, which is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium thick aluminum plate and pattern aluminum plate. Parameter Product Name: Aluminum plate Price range $350-$900 The price is favorable if the quantity is large Minimum order quantity 1 ton Specifications Thickness 0.2-500mm, width 200-1500mm,or according to requirements Standard ASTM, JIS, DIN, GB, Steel Grade 1050 A12 3003 5052 6061 7075 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. Product certification ISO,SGS,BV,TUV, Processing Service Welding, Drilling, Cutting, Bending�¯�¼?stamping Surface treatment Passivation Chromated Oiled Unoiled. Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T ,LC Exporting country South Africa: Zambia, Angola, Zimbabwe, Malawi, Mozambique East Africa: Ethiopia, Eritrea, Somalia, Djibouti, Kenya, Uganda Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
A unique product of Aluminum briquettes made from aluminum turning Aluminum contain 90% above.
One of the largest integrated primary producer of aluminium in Asia. With a pan-Indian presence that encompasses the entire gamut of operations, from bauxite mining, alumina refining, aluminium smelting to downstream rolling, extrusions and recycling, Hindalco enjoys a leadership position in aluminium and downstream value-added products in India. Our Indian aluminium operations are integrated and consist of bauxite mining, alumina refining, smelting and converting primary metal into value-added products. We have dedicated sources for critical raw materials such as bauxite, power and coal. We also have committed supply sources for auxiliary chemicals. Our finished products include alumina, primary aluminium in the form of ingots, billets and wire rods, value-added products such as rolled products, extrusions and foils. Metallurgical alumina is used for our own captive needs. Chemical alumina and hydrates are used in range of industries including water treatment, fillers in cables and plastics, refractories and ceramics, glass among others. Our facilities are in regions close to raw material sources, low cost and available labour and demand markets. This helps in reducing costs and improving profit margins. The technology upgrade has resulted in higher utilisation rates at our plants and improved efficiency. We believe implementation of superior technology not only reduces costs but also provides superior and customised products, thus, improving our sales. Hindalcoâ??s integrated complex at Renukoot, in Uttar Pradesh, India, houses an alumina refinery, an aluminium smelter and facilities for the production of semi-fabricated products. Power is sourced from our Renusagar power plant, located about 45km from Renukoot. Our facilities also include an aluminium smelter and an aluminium FRP facility (for rolled products, extrusions products and wire rods) at Hirakud (Odisha) with a captive power plant and coal mine, and alumina refinery at Muri (Jharkhand). Our Chemical grade alumina plant is located at Belagavi (Karnataka), and rolling mills at Belur (West Bengal), Taloja near Mumbai and Mouda near Nagpur (Maharashtra). Foil rolling facility is situated at Mouda near Nagpur (Maharashtra) and our extrusion plant at Alupuram (Kerala). Hindalco's new age smelters at Aditya (Odisha) and Mahan (Madhya Pradesh), operating on state-of-the-art AP36 technology, have not only resulted in expansion of our capacities but also improved cost-efficiency of our operations. These smelters have their own captive power plants and source alumina from Utkal, our 100% subsidiary. Utkal Alumina (Odisha) is a world class refinery with one of the lowest cost structure in the world. The bauxite for Utkal is sourced from Baphlimali mines by a 18 kilometer long conveyor, one of its kind in the world.
ALLOY:1100 1050 1050A 1060 1070,1080,3003,3004,3005,3104,3105,5005,5052 TEMPER:O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 etc. THICKNESS: 0.1mm- 7mm WIDTH: 10mm to 2630mm Max APPLICATION: Printing Plate, Antiskid Tread Plate, Lid Stock, Industrial Device, Storage, cabinet sheet, lighting component,All Kinds of Containers, etc.,
We are supplier and exporter of Aluminum Alloy Ingots ADC 12 Our company supply ADC 12 and Aluminum Ingots, Origin.. India, Indonesia, Vietnam , China And Europe. PAYMENT TERM.. SBLC, LC AT SIGHT, 30/70 ICPO and BCL
Aluminium coil Alloy:5052 H38/H34 Specification:0.7mm*940mm/0.7mm*980mm
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
3 Roda Mosquito Qoil - The original product from Indonesia. - Can Expel Mosquito and Insect. - Type Available : - 8 Hours Green - 8 Hours Green Refill - 10 Hours Green - 10 Hours Red - 12 Hours Green
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
alloy or not:1xxx, 3xxx, 5xxx, 6xxx, 7xxx, 8xxx brand name:musen place of origin:guangdong, china (mainland) application:electronic, electrical appliances, building etc type: sheet treatment:no color:sliver temper:o-h112 thickness:0.2-200mm thickness tolerance::+ / -5% width:50-2600mm ID:505MM OD:1750MM MAX surface:pe protection film on one side or paper protect between sheets. flanttness quality:both sides surfaces must be cleaned/degreased, no surface defects:pits & dents, black spot, oils stains, scratches, no bending on flat surface. certification:fda/sgs/iso/ gb/t3198-2010 packaging details:by plywood pallets, standard export sea worthyport: qingdao/tianjin/chongqing/shenzhen delivery detail:25 - 40 days after receive deposit or lc fob price usd $ 2, 000 - 3, 000 / ton min.order quantity:5 tons supply ability:2000 tons per month company profile: Musen Group is the leading trading & manufacture company in China, and we are themajor strategic partner in charge of oversea market with CHALCO & WANJIGROUP, the state-owned enterprises in China. We have our own factory forproducing aluminum slugs in Jiangsu, and we also have a own partner factory inFoshan to producing aluminum sheets and coils.20 years experience make us havemany resources in China aluminum industry including CHALCO and publiccompanies, whom can manufacture aluminum foils, aluminum sheets, plates and coilsfor different applications, aluminum circles and mirror sheets, embossedaluminum sheets, checked sheets, etc Main product:aluminum foils,aluminum sheets,aluminum coils,aluminum strip,aluminum plates,embossing aluminum coils,aluminum chequered plates,aluminum circles,aluminum slugs,aluminum disc. Temper: O-H112 Thickness:0.0045-200mm Width:20-2600mm factory equipment : The core equipments are introduced from Germany, Italy and other countries, such as 2400mm-KUPP hotrolling mill,3 sets of 2300mm-SMS SIEMAG cold rolling mill, 3 sets of2150mm-ACHENBACH foil mills , 2 washing machines pull straightening out , 1knitting machine , 1 slitting machine , 1 high-speed trimming machine , 1 co-volume machines, 3 sub-volume machine, 4 grinders, 40 vans andthree-dimensional elevated annealing furnace intelligent libraries relatedauxiliary equipments and so on. We are confident to be your helpful cooperation partner to export the aluminummaterials from China to global markets.
Classification : Hastelloy Alloy Hastelloy Alloy Coil is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Coil is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Monel Alloy 1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.
