The self-unloading ship adopts a self-unloading system with belt conveyor as the main body. The cargo space turns a hopper shape, unloads cargo from the hopper gate by the role of gravity, can feed cargo from the cargo hopper mouth to a ring-shape belt machine through pulling the hopper by man, by hydraulic pressure or pneumatic pressure, then lifts to the height of the deck and finally delivers the cargo through the conveyor belt on the unloading arm to the storage yard of receiving device on the bank.
The self-unloading ship mainly depends on high unloading efficiency and rapid turnover speed to obtain good economic benefits with low requirements to channels, also it can greatly reduce cost invested in equipment in the unloading dock, therefore, it is very effective.
5000t passenger vessel/ship for sale as scrap metal YOM: 2015, Gross tonnage: 5464 Length overall (m); 90 Location; Zanzibar
The unloading speed is designed based on shipbuilding tonnage and can reach 2,000 to 6,000 tons per hour; the operation efficiency is very high;
Self-unloading ship is a hull with special cargo space structure and unloading equipment, can discharge cargo in a continuous way and unload materials to the dry bulk ships directly.
Chemical Name: Monocalcium Phosphate Molecular Formula: Ca (H2PO4) 2, Ca (H2PO4) 2�·H2O Molecular Weight: anhydrous: 234.05; Monohydrate: 252.07 CAS: anhydrous: 7758-23-8; Monohydrate: 10031-30-8 Character: It is white crystalline powder or flaky crystal. Specific gravity is2.220. When heated to 100â??, it begins to lose crystal water. It is soluble in hydrochloric acid and nitric acid ,slightly soluble in water(1.8﹪). Uses: In the food industry, Monocalcium Phosphate serves as a raising agent for chemically leavened baked goods, baking powders,prepared cake mixes, self-rising flour, pancake mixes and more. It can also be used as an acidulant and buffer in dry beverage mixes. Packing: It is packed with polyethylene bag as inner layer, and a compound paper-plastic woven bag as the outer layer. The net weight of each bag is 25kg. Storage & Transportation: It should be stored in a dry and ventilating warehouse; be cautious to keep away from moisture and hot; unloaded with care, so as to avoid the damage. Furthermore, it should be stored separately from poisonous substances
The EverFlex stent is designed for use in the treatment of peripheral arterial disease (PAD), specifically in the iliac arteries. Key features of the EverFlex Protege stent may include: Self-Expanding Design: The stent is self-expanding, meaning it can open and conform to the shape of the artery without the need for balloon inflation. Nitinol Construction: The stent is typically made of nitinol, a nickel-titanium alloy known for its flexibility and ability to maintain shape memory. Longitudinal Flexibility: The stent is designed to provide longitudinal flexibility, allowing it to adapt to the natural movement of the vessel. Iliac Artery Treatment: The EverFlex Protege stent is specifically indicated for use in the iliac arteries, which are located in the pelvis.
The boat is not installed with hoisting equipment but completes loading and unloading of cargo by the hoisting equipment or loading and unloading machinery on the dock. Generally a flatboat has one cargo space only.
The self-unloading ship adopts a self-unloading system with belt conveyor as the main body. The cargo space turns a hopper shape, unloads cargo from the hopper gate by the role of gravity, can feed cargo from the cargo hopper mouth to a ring-shape belt machine through pulling the hopper by man, by hydraulic pressure or pneumatic pressure, then lifts to the height of the deck and finally delivers the cargo through the conveyor belt on the unloading arm to the storage yard of receiving device on the bank.
The self-unloading ship adopts a self-unloading system with belt conveyor as the main body. The cargo space turns a hopper shape, unloads cargo from the hopper gate by the role of gravity, can feed cargo from the cargo hopper mouth to a ring-shape belt machine through pulling the hopper by man, by hydraulic pressure or pneumatic pressure, then lifts to the height of the deck and finally delivers the cargo through the conveyor belt on the unloading arm to the storage yard of receiving device on the bank.
Steel/FRP boats, fishing trawlers, barge, self propelled steel hull vessels.
Distilled Water Still, Wfi Plant Manufacturer, Steam Generator Manufacturer , Pw Storage And Distribution Tank, Aseptic Mixing Vessel, Mixing Tank Manufacturer, Cip System Manufacturer, Horizontal Plate Type Filter Press, Liquid Oral Manufacturing Tank, Clean Room Equipment, Pass Box Manufacturer, Wfi Distribution System, Eye Drop Mixing Tank, Self Cleaning Filter.
Barges, motor tug and self-propelled barges, vessel .Manufacturer
Pressure Vessel Conical End with Cladding Plate-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
ASME Standard Pressure Vessel of Spherical Head ASME-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Reactor vessel head-tank head manufacturer -founded in 2000, dingjin general machinery co., ltd., specialized in the production of dished heads and pressure vessel plates, covering 74, 000 square meters which located in the beautiful costal city dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We possessed 3 sets of spinning units made in germany, self-made df10050, df 2220 and md21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from325*thk 8 to10000*thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in china. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (the maximum lifting capacity is 100 tons). Processing size of dish head(end): the max size with integral spinning technology is10000*50mm; the max size with integral stamping technology is6000*400mm; there is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: elliptical head china, hemispherical head china, dished heads china, conical head, customized dished ends, tank heads, china oem/odm dished end head.
Hot Forming Crown Head for End Cap-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from Φ325*Thk 8 to Φ10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is Φ10000*50mm; the max size with integral stamping technology is Φ6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Elliptical Head China manufacturer-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from Φ325*Thk 8 to Φ10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is Φ6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
China Hemispherical Head dished Head-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Nickel alloy / Zirconium Crown dish head -Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from Φ325*Thk 8 to Φ10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is Φ10000*50mm; the max size with integral stamping technology is Φ6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, Tank heads, China OEM/ODM dished end head.