Commodity: Dry Coconut Shells Husk - Biofuel
Uses: (1). (for Heating, Energy Uses and to Power Mills to Generate Electricity End Applications), (2). Dry Coconut Shells Husk - for Carbonization in Charcoal Kilns - into Coconut Shells Husk Charcoal Lumps - natural sizes mesh for Production-of (BBQ- Briquettes, Hookah and Shisha- machine made Charcoal)
(3). Dry Coconut Shells Husk to Crush / Grind into Sawdust to Produce - Coconut Shells Pellets
Burning: Long Burning Time
Specification: Moisture: 10%
Ash Content: 2%
Calorific Value: 3500-4000kcal/kg
Bulk Density: 410kg/m3
Palm kernel shells (PKS) are the shell fractions left after the nut has been removed after crushing in the Palm Oil mill. Kernel shells are a fibrous material and can be easily handled in bulk directly from the product line to the end use. We have capacity.
Humic Acid Powder is in black color and insoluble in water itself, it has high content of organic matter and humic acid, and is milled from leonardite or lignite sources.
Humic Acid Balls is in made from humic acid powder and has high content of humic acid and organic matter. It improves the soil condition by application
Humic Acid Granules is meshed out from natural leonardite or lignite souces, it is irregular shapes, high in organic matter and humic acid content
Potassium Humate Powder is in black color and soluble in water.It is extracted from natural leonardite or lignite powder. It has several grades for different applications.
Potassium Humate Flakes is derived from leonardite or lignite powder, it has high content of humic acid and water solubility.
Sodium Humate Powder is made from leonardite with NaOH, it is water soluble , it is widely used in agriculture, industrial and livestock feedings and milled from sodium humate shiny flakes, sodium humate crystals and dry-method. Sodium humate has lowest content of HA, not is most economy products
We were the first to start a china clay processing plant in Bhuj-Kutch, Gujarat, by acquiring 100 hectares of land on lease from the government in 1983.
Back in 2018, a fully automated kaolin plant was established, featuring High Gradient Magnetic Separation (HGMS) and an automatic filter press that can handle up to 8000 tons every month.
In 2020, all plants were revamped to include a ball mill, centrifuge decanter, hydro cyclone, and filter press, which helped us achieve a capacity of 25000 tons per month.
3857 2Flutes 4Flutes Ball Nose End Mills Suppliers
Short on time? Let 2Flutes 4Flutes Ball Nose End Mills sellers contact you.
Dimension: 4.7 (12cm) inch nose to tail and have a 4.7 inch (12cm) wingspan.
Manufacturer: Artisans in Vietnam
Condition: New
Material: Bamboo
-They have a point on the underside of their nose that they can balance on. They will balance on almost any small pointy surface. They look great arranged in a flower pot balancing on small dowel rods or well placed sticks. In one of the photos they are shown balancing on the small ends of pen. These are a very fun and unusual item. They make great gifts.
Layer Battery Cage model of extended height battery cages, provide the luxury of comfort and optimum space to the birds. Tesla series is particularly designed to make birds comfortable in the tropical climate, because it is provides more head room for the birds to get fresh air, even at the centre of the cage.
This economical system is indigenously designed and made in India, considering the efficiency of poultry production. The manure unit consists of complete rubber coated rollers and heavy duty gears and sprockets made of steel with Robust manure start and end kit. It is fitted with 360 degree ball type nipples for optimum supply of drinking water to birds.
The feeder trolley is accurately Calibrated so that only the desired quantity of Chicken Feed will be dispensed.
Our Premium Ball Clay is a highly versatile and refined clay material, ideal for a wide range of industrial and artistic applications. Mined and processed to the highest standards, this ball clay exhibits exceptional plasticity, workability, and consistency, making it a preferred choice for ceramics, pottery, and other specialized uses.
Key Features:
High Plasticity: Offers excellent molding and shaping capabilities, ensuring smooth and detailed forms.
Fine Particle Size: Provides a smooth texture and a fine finish, enhancing the aesthetic and functional quality of the end product.
Consistent Composition: Guaranteed uniformity in mineral content and physical properties, ensuring reliable performance in every batch.
High Purity: Minimal impurities, reducing the risk of defects and improving the overall quality of the finished product.
Excellent Workability: Easy to handle, shape, and process, suitable for both manual and automated production methods.
Firing Range: Suitable for a wide firing range, ensuring versatility in various firing techniques and temperatures.
Supply Ability: 50 sets per Month
Keywords: Small Mini Ball Mill 1 Ton
Per Hour
Dimension(L*W*H):Customized
Capacity(t/h): 0.2-40TPH
Warranty of core components: 5 years
Name: Grinding Ball Mill cement gold
processing Machine Prices
Motor Type: AC Motor
Machinery Test Report: Provided
Condition: New
Balls load: 0.5-17.5t
Place of Origin: China
Warranty: 1 Year
Advantages: High Efficiency Low Energy
Color: Customer Requirement
Weight: 17800 KG
Brand Name: XKJ
Type: Ball Mill
Video outgoing-inspection: Provided
Cylinder RPM(r/min): 24.1-45.5
Core Components: PLC,Engine,Gearbox,Motor,Gear
,Pump
Marketing Type: New Product 2020
Applicable Industries: Manufacturing Plant,Machinery
Price: Negotiable and reasonable
Packaging Detail: Standard containers
Highly efficient 3-phase Air Cooled motor
- 100% EC grade copper winding
- Easily Rewindable
- Good suction lift characteristics
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Double shielded ball bearings, so no need of external lubrication
- Mechanical seal or stuffing box is provided as per customers requirement
- Zero maintenance
Product Specification
Power Range : 1.0 HP to 10.0 HP
Operating Speed : 0 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 10000 Wp
Input Solar DC Voltage Range : 110 Vmp, 600 Vmp
Head Range : 10 Mtr, 50 Mtr
Discharge Range : 45000 LPD - 405000 LPD
Max. Suction Head : 7 Mtr
Type of Duty : S1
Material Of Construction
Part Grade
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.
specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
3857 2Flutes 4Flutes Ball Nose End Mills Suppliers
Short on time? Let 2Flutes 4Flutes Ball Nose End Mills sellers contact you.
