Our company manufactures Wireline Drill Rods, BQ, NQ, HQ, PQ, PHD, Parallel Threaded Drill Rods, DCDMA Sizes AW, BW, NW, HW, and Metric sizes 42 mm, 50 mm, 60 mm to 90mm. Note: 1. Thread oil should be used when screwing the drill rod and hammer knocking should be prohibited. 2. The drill rod stand should have buffer materials, like wood, rubber, and more. The contact between the threaded ends and iron tools should be forbidden. 3. During the relocation of drill rod, the thread protector should be screwed on the threaded parts so as to protect it from damages. -
Dual-wall drill pipes is used for R. C. drilling, when it works, circulating medium is following through the gaps between the dual-wall pipes, carrying samples out of the holes efficiency, meanwhile, it can protect the hole from collapse, matching up with our R.C. air(water) swivel, GQ air-driven hollow DTH hammer can complete getthe samples constantly. -
Drift is a simple and general tool designed to measure inside size of casing, tubing, drill pipe and other pipes. Our Services: 1.High quality products with favorable price at right delivery. 2.Customized products. 3.Warranty. 4. When enquiry, please kindly advise below: Size: drift size & casing (tubing) spec if necessary Material: metal/ nylon or something else Quantity Port of destination if you need CNF or CIF price Your ideal delivery date if you need the goods urgently -
TSP-40 man portable drilling rig was designed in 2003 and adopted international advantaged technology. Strict testing has been passed in the worst terrain and mountain areas. It can be used in mountain, hill, Plain, Forest, Farmland for petroleum prospecting. All of operation handles and indicators were installed on operation platform. The rig was installed with safety, caution and environmental protection symbols, and it meets with the requirement of HSE. The rig is a kind of high efficiency and applied equipment for petroleum seismic crew. The rig can be disassembly into 10 modules, and each module weight was not exceed 100kg. The rig includes two sections: The first section is the main-rig section in which the rotarying and pulldown of the rig is realized by an engine driving a hydraulic pump via belt. The second section are air compressors I which two engines respectively drive two air compressors which supply downhole hammer with air as the motive force, and as the well washing medium. The rig totally needs three engines as the power. The rig has the advantages of light-weight, simple construction, easy to assemble, disassemble, transport and operate. The drilling rig can be work at -10â??and +55â??, 0-3000m height above sea level, ambient temperature in dusty environment. If you are also interested in other drilling rigs contact EveryChina site, Zhuozhou Threesource Company for detail contact.
TST-150 truck-mounted drilling rig is the new designed rig used for petroleum, coal and minerals prospecting and sampling in complex terrain formation area. It is mounted on WTC5225TSM 6*6 off-road truck chassis. Power takes from chassis engine. The drilling rig uses hydraulic driving. It can carry out air drilling, mud drilling normal circulation function. Main technical parameters: Max drilling depth Mud drilling: 150m, air drilling: 80m Drilling method Mud drilling, air drilling Drilling tools Drill bits (dia) Ф114mm Drilling pipe (DiaXLength) Ф60�4500mm Power swivel Output torque 3400N.m Output rev. scope 0-160 r/min Pull-up & pull-down system Max pull-up force 32kN Feed rate 0�0.4m/s Max Pull-up rate 1.7m/s Hydraulic system Oil pump rev. 1600r/min Working pressure Rotating 17MPa Pull-down 12MPa Mud pump Pressure 3MPa Flow rate 300L/min Screw air compressor Pressure 1.2 MPa Displacement 12.5 m3/min
Tungsten Carbide Drawing Dies Used for wire,bar and tube.We produce various tungsten carbide drawing dies which are used to draw ferrous and non-ferrous products.
Tungsten Carbide Cutting Wheels Our standard tungsten carbide cutting wheels have been well known and utilized throughout thin, flat glass cutting industries, tile cutting, used for all-purpose, ordinary cutting, etc. The cutting process is clean and fast, (smooth, clean afterbreak edges and high yield), requiring no oil or other lubricant. We can send you some samples for your testing. Welcome your enquiries. Samples and quotation will be given upon receipt of your enquiry.
Tungsten Carbide Gear Hobbing/ Gear Milling Cutters We produce various of tungsten carbide gear hobbing cutters, they can be made according to customers' request. No minimum order quantitiy. Please contact us for details. Samples and quotations will be given upon receipt of your inquiry.
Product name:12 1/4" iadc537 tricone bit/rock roller bit for warer well drilling Model:12 1/4" iadc537 Type:tci rock roller bit Wob:0.35~1.05kn/mm Rpm:110~40 Usage: water well drilling Suitable formation:medium soft with low compressive strength and harder avrasive stringers, such as hard shale, hard gypsolyte, soft limestone, sandstone and dolomite with stringers, etc. Hebei crossing drill bit manufacture co., ltd is a professional supplier of drilling tools, including tricone bit, pdc tricone bit, hole opener, single cone bit and so on.With years of study and refining of the introduced technology, we have succeeded in the field of product research with proprietary intellectual property rights.Also, we have made major breakthrough in the lines of analogue simulation in bottom-hole flow field, profile optimization, design of inserts arrangement and low torque, material and manufacturing techniques etc. As a result, our products own better characters of service and ranges of application.Mainly used for oil and gas, mining, geothermal, construction and so on. The products of our company have achieved industrialization and serialization.Besides our company has always laying importance on the technical exchanges and cooperation with the counterparts both at home and abroad.Our products have been sold all over the world, including the united states, england, canada, brazil, russia, italy, iran, saudi arabia, korea, india, and poland and so on.
Product name:16" hole opener for horizontal directional drilling Model:16" hole opener with 5 pcs of 8 1/2" roller cones Usage:horizontal directional drilling Hebei crossing drill bit manufacture co., ltd is a professional supplier of drilling tools, including tricone bit, pdc tricone bit, hole opener, single cone bit and so on.With years of study and refining of the introduced technology, we have succeeded in the field of product research with proprietary intellectual property rights.Also, we have made major breakthrough in the lines of analogue simulation in bottom-hole flow field, profile optimization, design of inserts arrangement and low torque, material and manufacturing techniques etc. As a result, our products own better characters of service and ranges of application.Mainly used for oil and gas, mining, geothermal, construction and so on. The products of our company have achieved industrialization and serialization.Besides our company has always laying importance on the technical exchanges and cooperation with the counterparts both at home and abroad.Our products have been sold all over the world, including the united states, england, canada, brazil, russia, italy, iran, saudi arabia, korea, india, and poland and so on.
we are a well reputed firm here in brandth road lahore Pakistan we specialized in tolls and machinery mostly we are perfect in Hand, Cuttimg ,Power and Auto tools we provide the quality and price that the customer required as we reside on branndth road we also manufactures the machnery like lathe machines, trainers and as well the quadrants on the customer demand.we are member of Kraft Germany and also hold the distribution of Pro's kit tools . we provide local n imported tools as the customer demands.we are in business of this area of field for more then 10 years , quality n customer relation are the main targets of our firm thats why we are dealing from 10 years with faith n belief ,
1.Cutting structure this type tci tricone bits: The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit. 2.Gauge structure this type tci tricone bits: Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life. 3.Bearing structure of this type tci tricone bits: High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved. 4.Seal and lubrication of this type tci tricone bits: Premium oring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability . 5.Product application this type tci tricone bits: It can receive high wob in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height. 6.Advantage: 1. High-strength, high flexibility, high temperature and high wear resistance. 2. High-precision metal seal. 3. Locking roller ball, to adapt to high-speed. 4. The use of high strength high toughness carbide teeth, 5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock. 6. Cone bit to adapt to the soft, medium and hard of various strata. 7. Reasonable price and long working life.
Specification: 1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29°C~121°C. 4).application enrvironment: standard or H2S 5).Standard: API standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
General Instruction: We offer a complete line of single & double and triple tube core barrels, which willl provide superior performance and obtain the full recovery of the sample in any application of diamond core drilling. Using a wireline system, core is recovered quickly by retrieving the inner tube directly through the drill string. The rods remin in the hole until the bit needs to be replaced. This has big cost advantages when drilling deep holes for mineral exploration. The core barrel assembly is composed of the inner-tube group and outer-tube group. Advantages: 1.Faster coring at greater depths 2.Good stability due to constant diameter of the drill string 3.excellent hydraulics 4.Good core recovery
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable. BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell. APPLY TO BELOW BOP: Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP Technical parameter Specification: 1. Standad: API 16 A and ISO 9001 2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa) 3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm) 4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram 5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP 6.Brand:Shenkai and Rongsheng. 7.Imitate: Camaron and Shaffer 8.U type and SH type Characters of BOP pare parts: In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks. Blowout preventer with spherical plastic core and dust-proof ring. Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use. Working of BOP pare parts: When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Lifting Subs are of one-piece construction and manufactured from alloy steel fully heat-treated. The structure includes sloping shoulder and straight shoulder, which can be selected by customs. Lifting Subs are normally manufactured 1200mm long overall. But this type sub can be made to any length desired.
Pilot/ Sonde Housing (2 3/8"~6 5/8" FH) Connection: Direct connection with drill pipe, Octagonal connection, Side-opening Octagonal connection back-load transmitter housing Standard connection side -load transmitter housing Choose the suitable drill bit based on different soil condition to improve construction efficiency. Good wearing, connviences to demount and maintain. Available for all makes (XCMG, Ditch Witch, Vermeer, Astec, others) and bolt hole patterns. 3.5", 4", 4.5" and 5" cut. Sonde Housings with a variety of thread configurations. Our Side-Load Housings are manufactured from American-Made 4140 Alloy. Our Heat Treatment Process and optional Hard Facing give you the wearability you can count on. They are offered for Duck Bill or Carbide Bits. All of our sonde housings are machined from heat treated 4140 Alloy for superior strength and durability.Side load feature provides for quick installation and removal of transmitter sonde and batteries.Hex-style connection on the 2-3/4" and 3" models provides for quick disconnect from the drillstem.
1. Barrel reamer-2: Specification: Size: 200-2000mm Suitable for soft soil. Connection with drill rod: Direct connection with drill rod Octagonal connection Connection with laid pipe: Within or without swivel 2. Cutting reamer: Specification: Size: 200-2000mm Suitable for hard soil and strong-mantle rock. Connection with drill rod: Direct connection with drill rod Octagonal connection 3. Barrel reamer-3: Specification: Size: 200-2000mm Suitable for soft soil. Connection with drill rod: Direct connection with drill rod Octagonal connection Connection with laid pipe: Within or without swivel 4. Barrel reamer-1: Specification: Size:200-2000mm Suitable for soft soil. Connection with drill rod: Direct connection with drill rod Octagonal connection Connection with laid pipe: Within or without swivel 5. Fluted reamer: Specification: Size: 200-2000mm Suitable for sand and medium-to-very hard soil. Structure: Steel casting, Welded Connection with drill rod: Direct connection with drill rod Octagonal connection Connection with laid pipe: Within or without swivel
1. PDC Matrix Body bit Type and feature PDC bit can be customized for oil well,water well, mining, explorer well drilling. Suitable formation Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble. Main type Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",etc.Body type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings. 2. PDC Matrix Body Core Bit Type and feature PDC core bit can be customized for oil well,water well, mining, explorer well drilling. Suitable formation Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble. Main type 75/54mm,94/74mm,113/89mm,113/109mm,153/129mm,215/105mm,etc. 3. PDC Steel Body Bit Type and feature PDC bit can be customized for oil well,water well, mining, explorer well drilling. Suitable formation Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble. Main type Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4", etc. Body Type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings 4.PDC Drill Bit Body & Cutters Welding PDC body(matrix) Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc. 2.PDC body(steel) Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc. Core bit body(matrix or steel) Main Type:75/54,94/74,113/89,113/109,153/129mm,110/215.9mm, etc. 4.PDC cutter and Welding OEM PDC Cutters Type : 5/16"(8mm), 1/2"(13mm), 5/8"(16mm), 3/4"(19mm).
From WLA to WLP, Parallel Threaded Drill Rods, DCDMA sizes AW-HW, and Metric sizes 42mm to 90mm, tapered threaded drill rods, DCDMA sizes AWY to NWY, AWJ, BWJ and S75 drill rods. Specification: 1. Our drill rods are of the highest quality ,are manufactured to exacting specifications using advancing maching technoogy. 2. They are manufactured from seamless steel tube by cold drawn.The material is XJY850/30CrMnSiA which meets the global standard. 3. Drill rods are made from quality heat treated materials which ensure superior strength, wear resistance and toughness in the most demanding applications. 4. Rods and casing are manufactured under stringent industry standards, and are field tested under a variety of conditions. 5. All rods are designed to be compatible with other rods manufactured to the standard DCDMA.
