Hsk40e tool fingers cnc tool change grippers Model: hsk 40e tool fork clips This cnc gripper is hsk40e tool gripper for hsk 40e cnc tool holder. Hsk40e tool finger specifications: 1. Made in china, famous brand. 2. Imported pom plastic material, high quality, reinforced and anti-explosion. 3. Dynamic balance grade: g2.5, 30000rpm 4. Yaw precision: 0.005mm Cnc tool fork hsk40e are available in stock for quick delivery. Rico cnc supplies high-quality cnc toolings, replacement and accessories. Iso30 tool forks, hsk 63f tool grippers, bt30 bt40 tool clips, iso10 forks, iso15 clips, iso20 grippers, iso25 tool fingers, cnc replacing tool finger for many automatic tool changers such as biesse, cnt motion, cr onsrud, dms, flexicam, multicam, northwood, homag, scm, unique and more. Payment can be made by western union, paypal, t/t. Welcome your inquiry!
Specifications:- 1)Origin:Russia 2)Ash Content,not more %: 0.1 3)Mass fraction of sulphur,not more % -low-sulphur-residual-oil :0.5 4)Temperature of the flash,not less °C in the closed crucible in the open crucible °C :110 min 5)The temperature of solidification,not higher °C :25 6)Kinematics viscosity at 50°C: 118 max 7)Water Content: 0.5% 8)Mechanical Impurities:Lower than 0.1% 9)Acidity:Lower than 5mg KOH/100 ml 10)Gross Calorific value Kcal/kg/KJ/kg: Min 9200/41300 11)Density at 15.0 deg. C kg/l: 0.880-0.9200 12)Hydrogen sulfide content (H2S)pom:0.5 max 13)Carbon Residua:Lower than 7% 14)Vanadium (V) ppm : 30% MAX 15)Aluminium (Al) ppm : 5 16)Silikon (Si) ppm :12 17)Nickel ((NI) ppm :49 18)Asphaltenes :/ :3.6% 50,000-250,000 MT/month with roll for extension 100-75x50mmx75cm Tanks
Plastic mill/non-ferrous metal mill Working principle: The material and air flow are rotating with the high speed rotation when the equipment is running.The materials are crushed by the strong air pressure, strong shear force and fierce impact with each other on the grinding block composed of turbine rotor and abrasive bricks of the sieve circle.It is on the basis of the airflow and the machine, and turn into the products such as uniform particle, small particle size distribution range. The performance and feature The machine has many advantages, including low energy consumption, high efficiency, long life, easy maintenance and change parts and so on. Especially for the powder separation of the combination or compound of metal and nonmetal.It can make all kinds of metal into a round ball, this is good use for electrostatic and separation.The patent of this machine is zl200820148816.9. Applicable scope This machine is widely used to all kinds of materials under the medium hardness , such as the plastic (polyethylene, polyester, polypropylene, polyvinyl chloride, polyethylene, polypropylene, nylon, pom, etc.), rubber, chemical dyes (salt, pigment, gesso, paint, kaolin, etc.), pesticide, medicine, food, feed, non-ferrous metals (copper, aluminum, iron, magnesium, etc.) or nonmetallic minerals (such as asbestos, glass, clay, etc.) and so on . Plastic mill/non-ferrous metal mill
Abs grinder | ppr mill grinder | abs price Working principle: The material and air flow are rotating with the high speed rotation when the equipment is running.The materials are crushed by the strong air pressure, strong shear force and fierce impact with each other on the grinding block composed of turbine rotor and abrasive bricks of the sieve circle.It is on the basis of the airflow and the machine, and turn into the products such as uniform particle, small particle size distribution range. The performance and feature The machine has many advantages, including low energy consumption, high efficiency, long life, easy maintenance and change parts and so on. Especially for the powder separation of the combination or compound of metal and nonmetal.It can make all kinds of metal into a round ball, this is good use for electrostatic and separation.The patent of this machine is zl200820148816.9. Applicable scope This machine is widely used to all kinds of materials under the medium hardness , such as the plastic (polyethylene, polyester, polypropylene, polyvinyl chloride, polyethylene, polypropylene, nylon, pom, etc.), rubber, chemical dyes (salt, pigment, gesso, paint, kaolin, etc.), pesticide, medicine, food, feed, non-ferrous metals (copper, aluminum, iron, magnesium, etc.) or nonmetallic minerals (such as asbestos, glass, clay, etc.) and so on . Abs grinder | ppr mill grinder | abs price
Place of Origin: Guangdong, China (Mainland) Brand Name: Egood Model Number: TYPE 65,80,100 Open Style: Folding Position: Interior Surface Finishing: Finished Type: movable partition Door Material: Aluminum Alloy Track: Anodized aluminum 6063-T6 Carrier materials: Imported POM Main frame: Anodized aluminum 6063-T6 Carrier over load: 225kg Panel thickness: 65,80,100mm Sound insulation: Max 45db Height: Max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: Melamine,fabric,leather,HPL,wall paper ect. 1)Thickness panel:65mm,80mm,100mm, height from 2meter to 17meter 2)Top supported without floor track or guide 3) Clear anodized extruded aluminum tracks and frames,customized powder coated color are available 4) Rock wool infill,with top and bottom retractable mechanism in the middle and mdf,plywood or plaster base board on both side 5) Sound insulation coefficien :STC 32db to 53 db, ASTM standard of acoustic tested in HongKong. 6) Available in wide range of finishes. 7) Fast delivery and Rich experiences in oversea project installation guide & supervision.
Place of Origin: Guangdong, China (Mainland) Brand Name: Egood Model Number: TYPE 65,80,100 Open Style: Folding Position: Interior Surface Finishing: Finished Type: movable partition Door Material: Aluminum Alloy Track: Anodized aluminum 6063-T6 Carrier materials: Imported POM Main frame: Anodized aluminum 6063-T6 Carrier over load: 225kg Panel thickness: 65,80,100mm Sound insulation: Max 45db Height: Max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: Melamine,fabric,leather,HPL,wall paper ect. 1)Thickness panel:65mm,80mm,100mm, height from 2meter to 17meter 2)Top supported without floor track or guide 3) Clear anodized extruded aluminum tracks and frames,customized powder coated color are available 4) Rock wool infill,with top and bottom retractable mechanism in the middle and mdf,plywood or plaster base board on both side 5) Sound insulation coefficien :STC 32db to 53 db, ASTM standard of acoustic tested in HongKong. 6) Available in wide range of finishes. 7) Fast delivery and Rich experiences in oversea project installation guide & supervision.
Place of Origin: Guangdong, China (Mainland) Brand Name: Egood Model Number: TYPE 65,80,100 Open Style: Folding Position: Interior Surface Finishing: Finished Type: movable partition Door Material: Aluminum Alloy Track: Anodized aluminum 6063-T6 Carrier materials: Imported POM Main frame: Anodized aluminum 6063-T6 Carrier over load: 225kg Panel thickness: 65,80,100mm Sound insulation: Max 45db Height: Max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: Melamine,fabric,leather,HPL,wall paper ect. 1)Thickness panel:65mm,80mm,100mm, height from 2meter to 17meter 2)Top supported without floor track or guide 3) Clear anodized extruded aluminum tracks and frames,customized powder coated color are available 4) Rock wool infill,with top and bottom retractable mechanism in the middle and mdf,plywood or plaster base board on both side 5) Sound insulation coefficien :STC 32db to 53 db, ASTM standard of acoustic tested in HongKong. 6) Available in wide range of finishes. 7) Fast delivery and Rich experiences in oversea project installation guide & supervision.
Place of Origin: Guangdong, China (Mainland) Brand Name: Egood Model Number: TYPE 65,80,100 Open Style: Folding Position: Interior Surface Finishing: Finished Type: movable partition Door Material: Aluminum Alloy Track: Anodized aluminum 6063-T6 Carrier materials: Imported POM Main frame: Anodized aluminum 6063-T6 Carrier over load: 225kg Panel thickness: 65,80,100mm Sound insulation: Max 45db Height: Max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: Melamine,fabric,leather,HPL,wall paper ect. 1)Thickness panel:65mm,80mm,100mm, height from 2meter to 17meter 2)Top supported without floor track or guide 3) Clear anodized extruded aluminum tracks and frames,customized powder coated color are available 4) Rock wool infill,with top and bottom retractable mechanism in the middle and mdf,plywood or plaster base board on both side 5) Sound insulation coefficien :STC 32db to 53 db, ASTM standard of acoustic tested in HongKong. 6) Available in wide range of finishes. 7) Fast delivery and Rich experiences in oversea project installation guide & supervision.
Place of Origin: Guangdong, China (Mainland) Brand Name: Egood Model Number: TYPE 65,80,100 Open Style: Folding Position: Interior Surface Finishing: Finished Type: movable partition Door Material: Aluminum Alloy Track: Anodized aluminum 6063-T6 Carrier materials: Imported POM Main frame: Anodized aluminum 6063-T6 Carrier over load: 225kg Panel thickness: 65,80,100mm Sound insulation: Max 45db Height: Max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: Melamine,fabric,leather,HPL,wall paper ect. 1)Thickness panel:65mm,80mm,100mm, height from 2meter to 17meter 2)Top supported without floor track or guide 3) Clear anodized extruded aluminum tracks and frames,customized powder coated color are available 4) Rock wool infill,with top and bottom retractable mechanism in the middle and mdf,plywood or plaster base board on both side 5) Sound insulation coefficien :STC 32db to 53 db, ASTM standard of acoustic tested in HongKong. 6) Available in wide range of finishes. 7) Fast delivery and Rich experiences in oversea project installation guide & supervision.
SCM Group Morbidelli Clamping Fork for CNC ISO30 Toolholder This clampping fork is for Morbidelli cnc machine use. This holding fork is for Morbidelli ISO30 toolholder. Morbidelli CNC Tool Holder Specifications: 1. Made in China, famous brand. 2. Imported POM plastic material, high quality, reinforced and anti-explosion. 3. Dynamic balance grade: G2.5, 30000rpm 4. Yaw precision: 0.005mm ISO 30 CNC Tool holder forks for Morbidelli toolholders are available in stock for quick delivery. Rico CNC supplies high-quality CNC toolings, replacement and accessories. ISO30 tool forks, HSK63 tool gripper, BT30 BT40 tool cradles, CNC replacement finger for many automatic tool changers such as Biesse, CNT Motion, CR Onsrud, DMS, Flexicam, Multicam, Northwood, Homag, SCM, Unique and more. Payment can be made by Western Union, Paypal, T/T. Welcome your inquiry! Morbidelli clamping fork, Holding fork, clamp for CNC Tool Holder, Morbidelli cnc tool holder, Morbidelli tool forks, Morbidelli tool grippers, Morbidelli toolholder, Morbidelli tool cradle, Morbidelli ISO30 fork
Place of origin: guangdong, china (mainland) Brand name: egood Model number: type 65, 80, 100 Open style: folding Position: interior Surface finishing: finished Type: movable partition Door material: aluminum alloy Track: anodized aluminum 6063-t6 Carrier materials: imported pom Main frame: anodized aluminum 6063-t6 Carrier over load: 225kg Panel thickness: 65, 80, 100mm Sound insulation: max 45db Height: max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: melamine, fabric, leather, hpl, wall paper ect. 1)thickness panel:65mm, 80mm, 100mm, height from 2meter to 17meter 2)top supported without floor track or guide 3) clear anodized extruded aluminum tracks and frames, customized powder coated color are available 4) rock wool infill, with top and bottom retractable mechanism in the middle and mdf, plywood or plaster base board on both side 5) sound insulation coefficien :stc 32db to 53 db, astm standard of acoustic tested in hongkong. 6) available in wide range of finishes. 7) fast delivery and rich experiences in oversea project installation guide & supervision. -
Place of origin: guangdong, china (mainland) Brand name: egood Model number: type 65, 80, 100 Open style: folding Position: interior Surface finishing: finished Type: movable partition Door material: aluminum alloy Track: anodized aluminum 6063-t6 Carrier materials: imported pom Main frame: anodized aluminum 6063-t6 Carrier over load: 225kg Panel thickness: 65, 80, 100mm Sound insulation: max 45db Height: max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: melamine, fabric, leather, hpl, wall paper ect. 1)thickness panel:65mm, 80mm, 100mm, height from 2meter to 17meter 2)top supported without floor track or guide 3) clear anodized extruded aluminum tracks and frames, customized powder coated color are available 4) rock wool infill, with top and bottom retractable mechanism in the middle and mdf, plywood or plaster base board on both side 5) sound insulation coefficien :stc 32db to 53 db, astm standard of acoustic tested in hongkong. 6) available in wide range of finishes. 7) fast delivery and rich experiences in oversea project installation guide & supervision. -
General Mold Specifications: Name:Plastic injection moulds Plastic material:PVC/PPR/PP/PE/ABS/POM/PPH/PERT/PVDF/PPSU/...etc Steel of Cavity & Core:DIN 1.2316/ DIN 1.2738/DIN 1.2344 /M300/ 718/ P20..etc Steel of Mouldbase:S50C.LkM standardetc Nos of Cavity:Customized Fitting standard:EN/DIN/GB/BS Core pulling system:Hydraulic cylinders Injection molding machine:Engel ES3550/550K Gate system:Tunnel gate/Point gate/Direct gate/Sub-gate/Rectangular gate...etc. Design software:AutoCAD/UG/Solidworks Mould heat treatment: Tempering/Quenching/Nitriding Surface treatment: Polish/Etched...ect. Mould ejector way: Ejector pin/Ejector plate/ Air valves/Slide. Hardness of Cavity & Core:35-52HRC Hardness of Wear Parts:45-52HRC Core pulling system:Motor /oil cylinder/ stripping plate/angel pin/machinery. Mould Accessories:DME/HASCO Standard. Cooling system:In core baffle cooling and in cavity plate chain drilling type cooling Surface finish:Diamond polish Molding life:500,000-3,000,000shots Runner:Cold or Hot Delivery time:25-40work days Packing:wooden case woods
Engineering Plastic Materials., Pa6, Pa66, Pom & Pbt.
Pa6, Pa66, Pom, Pbt Plastic Resins.
Switch Probe Pogo Pin SWP164 for Electronic Test Switching Probes is a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switching probe we will introduce is SWP164. Its diameter is 1.64 mm and total length is 44.65 mm. As usual, switching probes do not entail very high currents, and this model SWP260 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP164 is 160 m. The materials used for the construction of switching probes are different for each component: The barrel is made of brass. Subsequently gold plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of Beryllium Copper, then gold and nickel plated. The insulating sleeve is made of POM For details of SWP164 switching probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 160 milliohms, maximum Full Stroke: 5 mm Rated Stroke: 3.3 mm Spring Force: 130 gf (4.5 oz) Normal Condition: Disconnecting between Plunge 1 and Plunger 2 Press down 1 mm: Continuity between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Au on Ni Plated Spring: SWP, Au on Ni Plated Plunger 1: Beryllium Copper, Au on Ni Plated Plunger 2: Beryllium Copper, Au on Ni Plated Insulating Sleeve: POM Advantages of this switching probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switching probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Valve Housing is a key auto valve fitting to assist valve to control the flow of air or liquid through the tube. If your valve in a corrosive environment and the valve housing can't resist corrosion, it will reduce the durability.The inappropriate valve housing and valve fittings will influence valve performance as well. So, choosing the right valve housing and valve seal material is critical to the running of an automobile valve and the whole system. The core characteristics, materials, properties of the automotive valve housing and application environment should be taken into consideration, including temperature, corrosion possibility, wear characteristics and pressure. The valve body is an important part of the vehicle's automatic transmission frame. It works in the system framework. The valve body directs the pressurized transmission fluid to the valve system, which is equipped with a suitable handle assembly to smoothly shift the gears. Also, the valve uses the weight of the pressure drive flag to determine the gear set, otherwise it is called servo. This process will be performed when the speed changes from low to high or vice versa. Material Available Stainless Steel:SS201,SS301, SS303, SS304, SS316, SS416 17-4PH etc. Steel:mild steel, Carbon steel, 4140, 4340, Q235, Q345B, 20#, 45# etc. Brass:HPb63, HPb62, HPb61, HPb59, H59, H68, H80, H90 etc. Copper:C11000,C12000,C12000 C36000 etc. Aluminum:AL6061, Al6063, AL6082, AL7075, AL5052, A380 etc. Iron :A36, 45#, 1213, 12L14, 1215 etc. Plastic:ABS, PC, PE, POM, Delrin, Nylon, Teflon, PP,PEI, Peek etc.
Name plastic plant pots mold Brand Name Odin MOULD Our Service Mould Tool Manufacturing/Plastic Injection Moulding and OEM Services/Prototyping and 3D Printing/Assmebly. Value -added Services DFM Report, Mould Flow, Mould Design,, QC Report, Injection Parameter Sheet, Testing Video. Standard ISO9001:2008 Component Standard Local, HASCO, DME, MiSUMI....etc Mould Base LKM Mould Base...etc Mould Material P20/718/738/NAK80/S136/H13/H13...etc Runner Hot Tip/Cold Runner...etcSMC/BMC Mould: heating oil or electirc Product Material ABS/PP/PC/PE/PA/POM/NYLON/TPU/PVC/PMMA/PLA...etc Painting Color Customized plastic plant pots mold maintenance: Mold maintenance is more important The more times the mold is repaired, the shorter the life of the mold, and the less the number of mold repairs, the longer the life of the mold. Mold maintenance is mainly divided into three points: 1. Daily maintenance of the mold, various moving parts such as thimbles, row positions, guide posts, guide bushing, cleaning of the mold surface, and dredging of water. This is the daily maintenance of mold production . 2. Regular maintenance. Regular maintenance includes cleaning the exhaust trough in addition to long-term maintenance, trapped gas burned at black level and exhaust, and correction of damage and wear parts. 3, appearance maintenance, the outside of the mold is painted with paint to avoid rust. When lowering the mold, the fixed mold of the moving mold should be coated with anti-rust oil. The mold should be closed tightly when stored to prevent dust from entering the cavity.
Name Vegetable Bread Crate Injection Mould Brand Name Odin MOULD Our Service Mould Tool Manufacturing/Plastic Injection Moulding and OEM Services/Prototyping and 3D Printing/Assmebly. Value -added Services DFM Report, Mould Flow, Mould Design,, QC Report, Injection Parameter Sheet, Testing Video. Standard ISO9001:2008 Component Standard Local, HASCO, DME, MiSUMI....etc Mould Base LKM Mould Base...etc Mould Material P20/718/738/NAK80/S136/H13/H13...etc Runner Hot Tip/Cold Runner...etcSMC/BMC Mould: heating oil or electirc Product Material ABS/PP/PC/PE/PA/POM/NYLON/TPU/PVC/PMMA/PLA...etc Painting Color Customized How to design the good crate injection mould? For the plastic crate mold, we pay more attention to the crate mold cooling system design. A good plastic filling system requires a special hot runner system to assist with molding to ensure optimal cooling. In order to produce a durable crate mold, the cooling water path on the largest forming surface of the mold must be optimized, and the tempered steel must be used with the excellent cooling water circuit design. In addition, the air venting system at the handle of the trunk is also the focus of our design. When the container is under load, the handle at both ends is the key point. If the two handles on the mold are not vented properly, obvious seams will be left and the product will be easily damaged.
Helmet Injection Mold Basic Imformation NAME (Mould Type) OEM Plastic Injection Mould Material of Steel 738ï¼?718ï¼?NAK80ï¼?S136,P20 etc... Plastic Material ABS, PP, PC, PVC, POM, PA66 etc... Runner Cold/Hot Runner Gate Type Pin point gate, Edge gate, Sub gate, Side gate,etc. Mould Life 500000-1000000 shoots Design Software UG, Pro-E, Solid Works, Auto CAD etc.... 1, Mould base is use of LKM frame, and HASCO standard frame, all components are with DME or HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 45#, 50#, P20, H13, 718&738H, 2738,2344, S136, from ASSAB, DAIDO, THYSSEN, FINKL,etc. heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply full set of 3D mold drawing and details layout. 4, We make all kinds of mold, big size up to 15 Tons, smaller size up to 0.5mm on plastics; We make cold runner mold, hot runner mold(Husky,Mold maser,Synventive,DME and YUDO), 3-plate mold, over mold, insert mold, reverse ejection mold, gas asistance mold, etc. Our engineer and technican are always keep studying and get more and more experienced and professional on mold making skills. 5, We have a wide usage on plastic material, especially for those may cause worse deformation, bad filling, worse part surface, we have our ways to control the mold to have better parts. 6, We ensure the mold life to customers, we provide steel and material conformity, certicate to customers. 7, Our advanced equipment and high effective mangement give customer quick lead time, sometimes we only take 10 days to complete prototype molds.
