Rated Power : 10KW Shaft Power : 11KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46 Rotor Diameter : 8m Blade Length : 3.9m Tip Chord : 250mm Max Chord : 397mm Material : FRP Weight(Kg/pcs) : 25.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Rated Power : 5KW Shaft Power : 6KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46. Rotor Diameter : 6.4m Blade Length : 3.1m Tip Chord : 255mm Max Chord : 360mm Material : FRP Weight(Kg/pcs) : 19.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Blade diameter 1.6m Rated Rotated speed 200 Rated wind speed 8m/s Rated power 300W Max voltage 450w Output voltage 12/24v Start up wind speed 2(m/s) Operating wind speed 3-35(m/s) Security wind speed 50(m/s) Height of tower 6m Weight of top section 102kg Output controller system charger and inverter Capacity and quantity of battery(reference) 12V100AH 2pcs can supply power for lighting, electric fan, charger. Wodden case packing.
1kw wind turbine YW series is with a good apearance. It's widely used for government project, such as street light. It's usually be used together with solar panel to build the hybrid system. It's used in the 2008 Olympic games and also will be probably used in the coming 2010 world cup.
Main Parameter: Model: TR10.0-20KW Rated Power: 20KW Max Power: 25KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 360V Start Wind Speed: 2m/s Rated Wind Speed: 12m/s Maximum Wind Speed: 45m/s Rotor Diameter: 10.0m Rated Rotor Speed: 90r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 18m or higher
Main Parameter: Model: TR8.0-10KW Rated Power: 10KW Max Power: 12KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 8.0m Rated Rotor Speed: 180r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Main Parameter: Model: TR6.4-5000W Rated Power: 5000W Max Power: 6000W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 6.4m Rated Rotor Speed: 200r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Main Parameter: Model: TR3.2-1000W Rated Power: 1000W Max Power: 1500W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 48V Start Wind Speed: 2m/s Rated Wind Speed: 8m/s Maximum Wind Speed: 35m/s Rotor Diameter: 3.2m Rated Rotor Speed: 400r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 6m ,9m or 12m
Turbine (Steam, Gas, Wind, Hydraulic) Click to enlarge image We have contracted pwoer generation projects. The main equipement is turbines, which are designed and manufactured to our standard which is accepted by our international clients. We have setup consortium for power generation projects with the main turbine producers in China, who can provide your every kinds of turbines, including steam turbine, gas turbine, hydraulic turbine, wind turbine. All these turbines are designed and manufactured to world most advanced technology such as from GE, Mitsubishi, and German standard. Steam Turbine: We can provides you various steam turbines of up to 60MW covering 9 series of condensing, back pressure, extraction, extraction-back pressure, geothermal, wet steam, multi-pressure, industrial and packaged modular units, including more than 200 types, which find a wide application in many industries such as power generation, petroleum, chemistry, printing and dying, textile, cement, pulp and paper, sugar refinery, steel and iron, garbage disposal, combined steam and gas turbine cycle, and urban district heating, and, user?s different requirements can also be satisfied to the utmost extent. The corporation devotes itself to the technical innovation, and adopts full 3-dimension methods for the optimization of garbage power and combined cycle units as well as 15MWf=25MWf=60MW?135MW?200MW units, completed with WOODWARD EHC systems and BENTLY instruments, thus showing a new image of products with the first-class technology in China. We can also provide you large sized turbine of which the technologies are transferred from top international turbine makers. 1.1000MW Ultra Super Critical Steam Turbine 2.600MW Super Critical Steam Turbine 3.600MW Sub-critical Steam Turbine 4. 300 MW Sub-critical Steam Turbine 5. 200 MW Steam Turbine GAS Turbine: Condensing Gas Turbine from 750KW to 25000kw; Exhausting Condesong Turbone from 1500kw to 22000kw; Single or Multi Stage Back Pressure Turbine from 750KW to 12000kw; Exhausting Back Pressure type with rating of 1500KW to 25000KW different dimensions
3125 KVA Allison 501KB Gas Turbine Generator 3125 KVA Allison 501KB Gas Turbine Generator, Allison 501KB turbine engine coupled to a Allen Gearbox and Brush Generator, all mounted on a Heavy Duty Steel Base Frame, Natural Gas Fuel, 3125 KVA/2500 KW, 11000 volts, 50 HZ, Year 1981, ONLY 1500 hours since new. The turbine package was used for standby power at a production facility and is very well maintained. Allison heavy duty turbines are dependable and are known for delivering reliable power to worldwide facilities. The first major maintenance is not required until it reaches 30,000 hours. Complete package.
Custom made turbine blade for steam turbine and gas turbine compressor. Non-OEM where quality and pricing offers a good deal.
Forged Entire CNC Machined Pelton Runner Forging could considerably improve metal's organizational structure and mechanical property. Forging offers uniformity of composition and structure. Forging results in metallurgical recrystalisation and grain refinement as a result of the thermal cycle and deformation process. This strengthens the resulting steel product particularly in terms of impact and shear strength.Forged steel is generally stronger and more reliable than castings part. Project Basic Information Project Name: Minas-San Francisco HPP Project Location: Ecuador Pelton runner pitch diameter: 2460mm. OD: 3179mm Net Weight: 13300KG Buckent No. 21 Output: 91.6MW Product Introduction 1. Brief introduction for Forged Integrally +100% CNC Machined Pelton Turbine Runner Forging could considerably improve metals organizational structure and mechanical property. Forging offers uniformity of composition and structure. Forging results in metallurgical recrystalisation and grain refinement as a result of the thermal cycle and deformation process. This strengthens the resulting steel product particularly in terms of impact and shear strength. Forged steel is generally stronger and more reliable than castings of same material due to the fact that the grain flows of the steel are altered, conforming to the shape of the part. Getai Hydropower is Pelton Turbine Experiment, Francis Turbine Diagram, Francis Turbine Working, Pelton Turbine For Sale factoty. Performance comparison table of forging parts and casting parts Performance test of forging part Mechanical Property bMpa 0.2Mpa �5% % AKVJ/cm� HB Standard value 795 620 15 45 50 230295 Actual value Horizontal 815 655 17.5 64.5 107 102 110 259 256 253 Vertical 820 660 18.5 67 149 152 136 256 257 257 Performance test of casting part Mechanical Property bMpa 0.2Mpa �´5% % AKVJ/cm� HB Standard value 750 550 15 35 50 221286 Actual value 770 610 17 50 84 88 85 252 255 254 2. Machining vedio for the Forged entire CNC machined Pelton runner. 3. ISO 9001 Quality Management system is carried out to ensure better management control 4. Advanced CFD, FEA technic is utilized in the designing process to ensure better technical solution. 5. CAE casting simulation is adopted for the produciton of casting parts, this advanced and reliable process plan could help effectively improve product quality. 6. All raw material strictly conform to international standard, key component such as runners, guide vane is Forged and entire CNC machined
GT Type Air Pneumatic Turbine Vibrator For Hopper Products Features Vibration intensity can be adjustable based on air pressure, can immediately start, stop, fast, low-noise, vibration force, security. Application Feed material conveyor, vibrating screening, vibrating hopper, to help fill packing, foundry sand mold vibration. Works Copper eccentric gear installed counterweight impact air intake charge into the gear rotates, the eccentric rotation of the centrifugal weight with vibration, the gear driven by a bearing, low noise.
Sensor VIbrasi Turbine and generator DWQZ Oriental YOYIK, a well-known brand of power equipment spare parts in the industry, not only provides comprehensive generators, steam turbines and boiler accessories, but also has well-known pneumatic and hydraulic component brand resources at home and abroad. Driven by technological innovation and focusing on quality control, the company provides stable and reliable equipment support for industries such as power, metallurgy, and mining, and has established a good brand image. Yoyik can offer many spare parts for power plants as below: #DF-Sensor VIbrasi Turbine and generator DWQZ-DF Eddy Current Sensor PR6422/103-140 IGNITER SPARK ROD XDZ-1R-1800/16 Sensor RTD Thrust Bearing Pad Generator L 130,45mm x Dia 5,80mm Furnace flame monitoring system screen splitter EHM-03-12D Sensor do vi tri khe ho chen APH GJCT-15-E RELAY AUXILIARY RELAY JZS-7/2403 thermal resistance WZGPK2-9A3 LVDT sensor 1000TDGN-15-01 linear displacement measurement 0508.902T0201.AW021 Analog Output Module HAO805 Limit Switch 3SE2210-OE Relay module 3300/33 Magnetic Resistance Speed Sensor CS-1 D-100-02-01 VOLTMETER 6L2-V Passive speed sensor CS-1 D-100-02-01 thermocouple WRNK2-191 Frequency transducer WBF154S01 Eddy Current Sensor PR6423/002-111 Connector 4-Pin P28J2Q high pressure transmitter RC861CZ090HYT LVDT Sensor 191.36.09.15 Speed probe DF6101-005-065-01-03-00-00 EH OIL PRESSURE HIGH 396049-WC103D Eddy Current Sensor PR6422/002-031 Shaft Displacement Protecting Unit TM0182-A90-B00-C00 speed sensor CS-1H-G-065-05-01 High Voltage Shielded Cable DKNL-4800 LVDT transmitter XCBSQ-03/35-01-22 Sensor DF311180-50-02-02 BENTLY Preamplifier 330180-91-00 Eddy Current Sensor PR6422/002-120 PLC CPU module IC693CPU374 Sensor; TILT SWITCH MFFP-15A AEVC-12DC PRINTED CIRCUIT BOARD IO PORT PCB JD10095 Bolt electric heating rod ZJ-15-350(R) analog cylinder position sensor TDZ-1-23 Sensor VIbrasi Turbine and generator DWQZ Sensor VIbrasi Turbine and generator DWQZ MY-DFYL-2024-7-17
Bellows GJCFL-15 for steam turbine Dongfang Yoyik perennial supply spare parts of steam turbine, turbine generator, EH oil system filter, fluorine rubber O-ring, EHC system various types of pumps, valves, power plant automatic control components, water turbine generator, all kinds of bearings, electrical insulation materials, and other power plant spare parts accessories. The quality is quite worthy of buying. Yoyik can offer many spare parts for power plants as below: #DF-Bellows GJCFL-15 for steam turbine-DF Thermal expansion sensor QBJ-TD-20-25mm Speed monitor display instrument SJK-B eddy current probe types TM0181-A45-B00 Indicator RDZW-2Na04-B02-C01-F01 DEH controller PLU650A speed sensor CS-4-065-03-02 AD Change Card AC6682 speed sensor CWY-DO-�¦11-01-A01-B5-C70-D10-E02 Water conductivity tester 2402B+2401B-01 outlet Oil Temp., Monitoring Controller DC1040CR-702-100-E SENSOR PROXIMITY TRANSDUCER CWY-DO-811107 industrial thermometer probe WSS-461 0ï½?350â?? �?8�?150 M27�?2 speed sensor CS-1H-D-075-03-02 Case Heat Expansion Monitor DF9032/03/03 Eddy Current Signal Converter CON021/913-030 cost to run electric heater RJ-22.5-650 proximity sensor device CWY-DO-813502 SF6 trace moisture monitoring device HS-WD LVDT sensor TD-1 0-100mm LVDT Sensor 1000TDGN-25-01 Eddy Current Sensor PR6423/002-010 Speed Sensor Include Cable RS-2-M16x1-L240 SPEED SENSOR FOR TURBINE SZMB-9 magnetic pickup tachometer CS-1 D-100-02-01 Pressure Switch 860300 Generator Exciter Board PCA-6740L SWITCH PROXIMITY 70C85-1010-423 RTD (PT-100) 3 WIRE WZP-231B Differential pressure transmitter CM HV Fuse XRNM1-7.2/80 types of pressure sensors 403213-N 10716 terminal 1771-WN Side Current Transformer LAJ1-10Q Conductivity meter LEX2000.01/4073-01-333-WS240 Eddy Current Sensor PR6422/103-110 HP LVDT SPRAY POSITION SENSOR BY PASS DET-700A Bellows GJCFL-15 for steam turbine Bellows GJCFL-15 for steam turbine MY-DFYL-2024-6-4
Compact lvdt measurement systems DET100A Chinese steam turbine is an exclusive product for power units offered by Yoyik. Dongfang Yoyik Engineering Co., Ltd mainly provides hydraulic components, spare parts of power units, mechanical parts processing and so on. We have spare parts, components, replacements for generators, boiler, turbines and hydroturbines. Yoyik can offer many spare parts for power plants as below: #DF-lvdt measurement systems DET100A-DF Control power supply PSMC1-4-220V/240W speed sensor CS-3-M10-L60 LVDT Sensor 3000TD-6 LVDT transmitter XCBSQ-02/400-01-02 Pressure Switch 6L-EE5-N4-C2A-YY LVDT Sensor 1000TDGN-25-01 Bolt electric heating rod ZJ-21-3(R) lvdt linear DET600B Anode and Cathode for electrolytic battery F4281S-H0601-202 RTD sensor WZPQ2-E32-50 high pressure transmitter BH-209028-209 Digital Temperature Monitor WK-Z2T4(TH) heater GYY-230/400-2 ACTUATOR RAGA RJ -50 speed sensor CS-1H-D-085-05-02 Vacuum pressure transmitter ZS-I FUSE HOLDER XRNM1-7.2/250 Travel switch NI4-M12-AD4X potentiometer for linear and angular position 191.36.09.01 PH measurement device PHG-5288 High Voltage Fuse SDLAJ-7.2kV/ 31.5A -50kA, XRNTO-7.2 with striker FAN RG130/0800-3612-030206 Displacement transmitter LTM-4-S1 linear position measurement 4000TD POWER SUPPLY JD194-BS5U Auxiliary power PSMU-1�±12V/120W Pneumatic Positioner F001798154 Differential pressure transmitter CMS-â? Pressure Switch RC0113CZ091Z LVDT transmitter XCBSQ-01/400-01-11 Transmitter 2051CD2A02A1AS5E1M5Q4 Eddy Current Sensor PR6422/103-001 RTD sensor WZPK2-16A Motor protection circuit breaker PKZMC-6.34.06.3A Dual Channel Vibration Monitoring Protector JM-B-3E Sensor DF310880-50-06-00 lvdt measurement systems DET100A MY-DFYL-2024-4-12
We are specialised in manufacturing industrial brake especially for wind turbines and port machinery. For wind turbines, we have yaw brake, high speed rotor brake, motor tailend brake, floating brake and hydraulic rotor lock. And we are also the approved vendor to provide brakes to these top famous wind turbine generator manufactures like GE, Siemens Gamesa, Nordex, Goldwind, Envison, etc. for many years.
1.400w output 2.Contains items: -generator -blades -waterproof charge controller 3.Place of origin: wuxi city, china 4.Materials: aluminum alloy shell 5.Supply capacity: 2900/month 6.Packing: carton 7.Delivery lead-time: 1 working day after receiving payment Model  ne-400m  rated power  400w  maximum power  410w  rated voltage  12/24v  start up wind speed  2.0m/s  rated wind speed  11.5m/s  survival wind speed  50m/s  top net weight  9.5kg  wheel diameter  1.55m  blades number  3/5  blades material  nylon fiber  generator  three phase permanent magnet ac generator  magnetic steel  ndfeb  generator case  die-casting aluminum  control system  electromagnet  speed regulation  automatically adjust windward  working temperature  -40 to 80â?? Design lifeâ 20 years  certifications Ce, iso14001, iso 9001 -
This blender series have the characteristics of universal round plate turbine blender.The difference is the change of the leave's section shape,as to increase the pump transferring capability of the blender,improve the performance of dispersion and media.The operation condition is the same with the universal round plate turbine blender. Flow state:The flat blade impeller and curved blade impeller are radial flow.When there is baffle,the upper and down circulating flows can be formed from the blade boundary.The opposite pitched subsidiary blade impeller has an axial shunt.The capacity mixing of liquid above and below the disc is worse than the open turbine impeller.
2 X 40MW GE Gas Turbines Available - More Info Available Upon Request
