Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Material Origin : Car Battery / Van Battery / marine batteries and industrial traction batteries. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. . Automotive Waste Batteries completely washed, cleaned with lead acid contents. RAINs per ISRI Specifications) (Product Detailed SpecWET/DRY WHOLE INTACT CAR LEAD BATTERIES(RINKs and ifications) height :116mm and whight :310 gr height :123mm and whight :350 gr Used Auto Battery Scrap Drained lead battery scraps Lead Battery Plate Scrap Type Battery Scrap 20D 16H Lead Battery Plates Scrap Lead Battery Plate Scrap Type soft lead scrap Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
Aluminum ingots, copper ingots, copper cathodes, magnesium ingots, zinc ingots, lead ingots, sugars, flour, rice, saffron, frozen beef products, frozen chicken products, frozen chicken paws, frozen prawns, frozen shrimp, coffee, cocoa, soybeans, corn, jet a1 fuel, diesel, urea formaldehyde concentrate, latex concentrate (ha), concentrated sulfuric acid (h204 98%, thermal coal .Manufacturing services, wholesaler, procurement services, importer, exporter, shipping, logistics
Gluten free native and modified starches for all industries like food, cassava flour, tapioca starch (cassava starch),maize starch (corn starch ), corn flour, potato starch, pregeletinised starches, physically modified clean label starches for food, functional native starches, rs4 dietary fibre starches, resistant starches, maltodextrins, liquid glucose, high maltose corn syrup, dextrose monohydrate, brown, white yellow dextrin, food grade modified starches emulsifiers, starch for crispy coating, starch as thickeners, binders, moulding starch, oxidised starch, thin boiled starch, acid treated starch, starch glycerols, e 1412 phosphated starch, e 1413 phosphated distarch phosphate, e 1414 acetylated distarch phosphate, e 1420 acetylated starch, e 1422 acetylated distarch adipate, e 1440 hydroxy propylated starch, e1442 hydroxy propylated di starch phospate, e 1451 acetylated oxidised starch. we make chemicals free, preservatives free, trans fats free, msg free, foods.Research and development of value added starches for specific applications, gluten free ingredients for food, vegan, plant based products for foods, etc., we are customising our value added modified starches, clean lable starches & functional food ingredients for the applications as binders, thickeners, emulsifiers, stabilisers, gluten free food ingredients, products, vegan food products, plant based food products, alternative meat products, meat analogues, texturing agents, low glycaemic food products, probiotic prebiotic symbiotic food ingredients. we are a complete customised solution provider for all kind of food applications.
Packing: In Can 720 Ml And 1500 Ml Net Weight Ingerdients: Gherkins/ Cucumber, Carrot, Garlic, Dill, Sugar, Salts, Acid Acetic, Water Size Of Gherkins: 3-6 Cm, 4-7 Cm, 6-9 Cm Shelf Life: 2 Years
Packing: in Can 720 Ml and 1500 Ml Net Weight Ingerdients: Gherkins/ Cucumber, Carrot, Garlic, Dill, Sugar, Salts, Acid Acetic, Water Size of Gherkins: 3-6 Cm, 4-7 Cm, 6-9 Cm Shelf Life: 2 Years
Bitumen 60/70, petroleum asphalt , diesel en590, jet fuel a1, d2, kerosine fuel, crude oil, light cycle oil (lco) , mazut, polyethylene(ldpe,lldpe,hdpe) ,liquefied petroleum gas (lpg) , liquefied natural gas (lng) ,automotive gas oil (ago), fuel oil (ifo) , cst , base oil, diesel ultra low sulphur (ulsd), eastern siberian pacific ocean (espo), crude oil, petroleum coke, urea, naphtha, sulfur, gasoline octanes, rebco, copper cathode and etc..
Lactic acid has characteristics,such as hot stability natural purely with soft and certain tart flavor,etc.Widely used in the food,pharmaceutical,electroless plating industries,etc. Basical Information: CAS#: 50-21-5 M.F.: C3H6O3 EINECS NO.: 200-018-0 Appearance: Colorless Transparent Viscidity Liquid Lactic Purity: 80.0-90.0% Item Unit Quality Standards Analysis Results Color Appearance Smell Chromaticity Hazen Colorless to pale yellow, Transparent liquid,No odor or slightly characteristic odor, Max.100 Light yellow Transparent liquidNo odor97.5 Burning residue % w/w Max. 0.1 0.04 Chloride ppm Max. 20
Product Name: L-Carnitine-L-tartrate Molecular Formula: C18H36N2O12 Molecular Weight: 472.49 Appearance: white or offwhite crystalline powder Purity: 99% CAS Number: 36687-82-8 EINECS number: 1308068-626-2 Application: nutrition supplement, medicine, especially applicable to solid preparation Supplier: ZHENYIBIO L-carnitine-L-tartrate (LCLT) is the salt of L-carnitine with tartaric acid. LCLT has potential chemoprotective and antioxidant activities LCLT is used in foods as a source of L-carnitine for particular nutritional uses. It can be used to reduce soreness, improve oxygen flow, increase density of androgen receptors, and elevate post-exercise fat oxidation. LCLT also promotes human hair growth. LCLT is used as nutritional therapy in the treatment of fatty liver and hemorrhagic shock in pharmaceutical and as a nutritional supplement in agriculture/animal feed to increase the growth rate and reduce the fat rate of aquatic animal.
CAS NO.: 87-90-1 DG Class: 5.1 Solubility(25 C): 1.2g/100g water Available Chlorine: 90% Moisture: 0.5% Granular: 8-30mesh,20-60mesh(or decided by customer) Tablet: 1g,3g,5g,15g,50g,100g(or decided by customer)
Molecular Formula - C7H6O3 Molecular Weight - 138.12 Appearance - white crystalline powder Density - 1.44g/cm3 Melting point - 158-161 C Boiling point - 211 C (20 mmHg) Assay - 99.0% min Loss on drying - 0.5%max Application - Pharmaceutical Intermediate
Deoxycholic acid (conjugate base deoxycholate), also known as cholanoic acid and 3�±,12�±-dihydroxy-5�²-cholan-24-oic acid, is a bile acid. Deoxycholic acid is one of the secondary bile acids, which are metabolic byproducts of intestinal bacteria. The two primary bile acids secreted by the liver are cholic acid and chenodeoxycholic acid. Bacteria metabolize chenodeoxycholic acid into the secondary bile acid lithocholic acid, and they metabolize cholic acid into deoxycholic acid. There are additional secondary bile acids, such as ursodeoxycholic acid. Deoxycholic acid is soluble in alcohol and acetic acid. When pure, it comes in a white to off-white crystalline powder form. EINECS No - 201-335-7 Color - White Powder Purity - 98% Function 1. treating and preventing cerebral thrombus; 2. Treating miocardial infarction; 3. Preventing high blood viscosity; 4. Treating angina pectoris, cerebral infarction, diabetes
Tempered glass, laminated glass, mirror, acid etched glass, fritted glass, float glass, reflective glass, low e glass, patterned glass, glass bottle, glass jar, glassware, glass tube, glass cup.
Food Chemical And Additives Sodium Acid Pyro Phosphate
During Hindalco's copper production process, by-products such as sulphuric acid and copper slag are formed. Sulphuric acid is partly converted into phosphoric acid, which is then made to react with ammonia to make di-ammonium phosphate (DAP) fertiliser. During the process of making phosphoric acid, phosphogypsum and hydrofluosilicic acid (HFA) are formed. HFA is partly utilised to make aluminium fluoride, and rest is sold in the market. Sulphuric acid Hindalco produces sulphuric acid of IS 266/1993 technical grade. The sulphuric acid plants use the double contact double absorption (DCDA) process, and are designed by Monsanto Envirochem (USA). Phosphoric acid Hindalco's phosphoric acid plant is based on the Prayon Mark IV dihydrate technology provided by SNC Lavalin (Belgium). Phosphogypsum Phosphogypsum is a by-product of Hindalco's phosphoric acid plant. Copper slag (iron silicate) Copper slag is produced during the smelting process at Hindalco's copper smelter located at Dahej. Aluminium fluoride Hindalco produces aluminium fluoride by reacting HFA (a by-product of the phosphoric acid plant) with aluminium hydroxide (from Hindalco's aluminium manufacturing facilities).
Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
Creatine Monohydrate, CAS No.6020-87-7, an odorless, white crystalline powder, a white odorless crystal powder that is extracted from fish and beef. Creatine Monohydrate is used in the food and beverage industry as an additive to food, health, and fitness products. Creatine Monohydrate can increase muscle strength, speed, and endurance while improving physical fitness and level of training, also available as Tri Creatine Malate. As an experienced Creatine Monohydrate manufacturer and supplier, we has been supplying and exporting Creatine Monohydrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Labsa 96% IN HDPE Drums Packing Available For Immedieate Shipment
Melting point 151-154 C(lit.) Boiling point 265 C100 mm Hg(lit.) Density 1,36 g/cm3 vapor density 5 (vs air) vapor pressure 1 mm Hg ( 159.5 C) refractive index 1.4880 FEMA 2011 | ADIPIC ACID Flash point 385 F storage temp. Store below +30C. solubility methanol: 0.1 g/mL, clear, colorless pka 4.43(at 25) form Solid color White Odor wh. monoclinic prisms, pract. odorless PH 3.74(1 mM solution);3.22(10 mM solution);2.71(100 mM solution); Water Solubility 1.44 g/100 mL (15 C) Merck 14,162 JECFA Number 623 BRN 1209788 Exposure limits ACGIH: TWA 5 mg/m3 Stability Stable. Substances to be avoided include ammonia, strong oxidizing agents. InChIKey WNLRTRBMVRJNCN-UHFFFAOYSA-N LogP 0.09 at 25â?? FDA 21 CFR 184.1009; 582.1009; 175.300; 175.320; 177.1680 Substances Added to Food (formerly EAFUS) ADIPIC ACID SCOGS (Select Committee on GRAS Substances) Adipic acid CAS DataBase Reference 124-04-9(CAS DataBase Reference) EWG's Food Scores 1 FDA UNII 76A0JE0FKJ NIST Chemistry Reference Hexanedioic acid(124-04-9) EPA Substance Registry System Adipic acid (124-04-9)
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
