Steel Tools Suppliers and Manufacturers

¡·this tool is used for removing the valve springs of vag cars. ¡·applications:4 cylinder 1.8l turbo(5v) audi a4 and passat b5. Box packing

Drywall sander with automatic vacuum system, New electric drywall sander with bag packing, dustless drywall Products parameter: Type: jz-3 Voltage: 110v-230v Frequency: 50hz Working diameter: 180mm Dust absorption rate: 98% Main shaft: m8 Instrument components: sander, suction machine, dust suckingconduit, dust collecting sleeve, braces, tube, trigeminal tool, and tool case. Product (cm) L52.0 W38.0 H31.0 0.061cbm Carton box (cm) N/a N/a N/a

High efficiency : 0-3100rpm 4-6times than manual work. Smooth : high smooth level without any scratch. Envivonmenfer : the unique dust extractor offers dust-free cireumstance. Portable :compact light weigh and convenient to carry. Humanized : streamlined&unique design.The removal kit at the edge of the sander special for corner sanding.Height of the pad is adjustable. Multifunctional : widely used on drywall sanding, polising, wood sanding, etc. Variety of hard surface finishing. Products parameter: The sanding machine weighs 1.7kg only 1. Standard components list: (1). Sanding machine (2). Suction machine (3). Suction pipe: 1.5m¡ê¡§retractable) (4). Power line: 1.5m (5). Dust collecting sleeve¡ê¡§long or short¡ê© (6). Braces (7). Trigeminal tool (8). Tool case. 2. The overall weight of the sander is 6.5kg including all standard components. 3. Components list: (1). Suction pipe: 3m (2). Power line: 3m 4. Packing (1). Small carton: 362¡¨¢295¡¨¢485 mm Product (cm) L52.0 W38.0 H31.0 0.061cbm Carton box (cm) N/a N/a N/a

Product Description: Dimension(mm):2980X1700X2025 / 2381X1700X2025 / 2255X1700X2025 / 1800X1410X1670 Power(KW):200/220;132/160;90/110;55/75 : - Magnetic impeller feeder, removes impurities effectively. - Air-swept 'tear circle' design. - Adding bottom re-grinding chamber, improve grinding efficiency. - Rotor is after high precision dynamic balance test, low noise and small vibration. - Rotor rotating direction can be positive and negative, allows hammer longer use life. - Elastic pressure sieve institution, replace sieve easier and faster. - Adjustable clearance between hammer and sieve, sufficient to satisfy different grinding requirements, coarse or fine. - Special treatment, high wearability long use life. - Gate locks with safety protection devices.

Ref.No. Size l(mm) qty/ctn 11316 6¡± 150 6/60 11318 8¡± 200 6/60 Drop forged with cr.V . Special design, labor-saving and high torque. Cutting same material could save 50% strength comparing other traditional similar tools in the market. Size :6", 7"

Ref.No size l(mm) qty/ctn 11336 6¡± 150 6/60 11338 8¡± 200 6/60 Drop forged with cr.V . Special design, labor-saving and high torque. Cutting same material could save 50% strength comparing other traditional similar tools in the market. Size :6'.7"

Ref.No. Size l(mm) qty/ctn 11326 6¡± 150 6/60 11327 7¡± 175 6/60 Drop forged with cr.V . Special design, labor-saving and high torque. Cutting same material could save 50% strength comparing other traditional similar tools in the market. Size :6', 7"

patent design:only need 5 degree to turn a nut compared to ordinary wrench need 30 degree to turn a nut ultra-thin design:suitable for application in narrow spance that other spanners cann¡¯t use. Ref. No. Spec. L(mm) package 6201 8mm 140 10/300 6202 10mm 160 10/300 6203 12mm 173 10/200 6204 13mm 180 10/200 6205 14mm 200 10/200 6206 15mm 211 10/100 6207 16mm 220 10/100 6208 17mm 230 5/100 6209 18mm 240 5/100 6210 19mm 250 5/60 6211 21mm 260 5/40 6212 22mm 273 5/40 6213 24mm 298 5/40

Chemical Composition£¨%£© Standard Steel Grade C Si Mn P S Cr Mo V Cu Ni DIN 1.2379 1.50-1.60 0.10-0.40 0.15-0.45 0.030 0.030 11.00-12.00 0.60-0.80 0.90-1.10 - -¡¡ ASTM D2 1.40-1.60 0.10-0.60 0.20-0.60 0.030 0.030 11.00¡«13.00 0.70¡«1.20 0.50-1.10 ¡Ü0.30 ¡Ü0.25¡¡ GB Cr12Mo1V1 1.40-1.60 ¡Ü0.60 ¡Ü0.60 0.030 0.030 11.50¡«13.00 0.70¡«1.20 0.50-1.10 ¡Ü0.30 ¡Ü0.25¡¡ Specification Round bar Diameter Length - Forged round bar£º¦Õ50~450 2000~6000 - Rolled round bar£º ¦Õ10~80 2000~6000 - Flat bar Thickness(mm) Width(mm) Length(mm) Forged plate£º20~300 50~710 2000~6000 Rolled plate£º 10~65 155~610 2000~6000 Characteristics 1.With good hardenability and abrasion resistance. 2.With high oxidation resistance, good corrosion protection after quenching and polishing and little deformation through heat treatment. Application Used to manufacture different kinds of cold work moulds with high accuracy and long service life, cutting tools and measuring instruments. Such as complex-shaped piercing dies, threading screw plates, cold-extruding dies, cold-cutting scissors, precision measuring tools, etc. Delivery Condition Annealed, hardness¡Ü255HB. According to customer's requirements.

Characteristics 1.Air cooling hardened hot work tool steel, most widely used hot work tool steel. 2.High toughness and cold and heat-fatigue resistance. 3.Excellent toughness hot fatigue resistance and certain abrasion resistance at medium temperature. 4.During air cooling, deformation and oxide skin tendency is small. Good resistance from the undermining of fusing aluminum. Chemical Composition: Standard Steel Grade C Si Mn P S Cr Mo V W DIN 1.2344 0.37-0.42 0.90-1.20 0.30-0.50 0.030 0.030 4.80-5.50 1.20-1.50 0.90-1.00 -¡¡ ASTM H13 0.32-0.45 0.80-1.20 0.20-0.50 0.030 0.030 4.75-5.50 1.10-1.75 0.80-1.20 -¡¡ GB 4Cr5MoSiV1 0.32-0.42 0.80-1.20 0.20-0.50 0.030 0.030 4.75-5.50 1.10-1.75 0.80-1.20 -¡¡ Specification Round bar Diameter Length - Forged round bar£º¦Õ50~450 2000~6000 - Rolled round bar£º ¦Õ10~80 2000~6000 - Flat bar Thickness(mm) Width(mm) Length(mm) Forged plate£º20~300 50~710 2000~6000 Rolled plate£º 10~65 155~610 2000~6000 According to customer's requirements.

Chemical Composition: Standard Steel grade C Si Mn P¡Ü S¡Ü Cr Mo V W DIN 1.2080 1.90-2.20 0.10-0.40 0.15-0.45 0.030 0.030 11.00-12.00 - - - ASTM D3 2.00-2.35 0.10-0.60 0.20-0.60 0.030 0.030 11.0-13.5 - ¡Ü1.00 ¡Ü1.00 GB Cr12 2.00-2.30 ¡Ü0.40 ¡Ü0.40 0.030 0.030 11.50-13.00 - - . Specification Round bar Diameter Length - Forged round bar£º¦Õ50~280 2000~6000 - Rolled round bar£º ¦Õ10~80 2000~6000 - Flat bar Thickness(mm) Width(mm) Length(mm) Forged plate£º20~300 50~710 2000~6000 Rolled plate£º 10~65 155~610 2000~6000 Characteristics 1.A kind of cold work tool steel in widespread use, belonging to ledeburitic steel of high-carbon and high-chromium. 2.With quite good hardenability and abrasion resistance, but small quenching distortion. 3.With not good impact toughness, be liable to fracture and form inhomogenous eutectic carbides. Application 1.Commonly used for manufacturing cold work moulds of excellent abrasion resistance with light shock loads, punch heads, cold cutting scissors, drill bushes, gauges, wire drawing dies, stamping dies, wire drawing sheets, drawing dies, thread rolling dies, etc. 2.Making cutting tools which is used for machining material of low hardness. 3.Used as plastic mould with good abrasion resistance and long service life. According to customer's requirements.

1. 1.2067 2. Thickness:20-500mm length:500-6000mm 3. Iso9001 2000, bv, abs 4. Standards: astm, jis, gb, en(din, bs, nf) Product basic information: 1.Chemical composition and mechanical properties(in quenched & tempered state): Material 1.2067 Chemical composition C si mn cr mo p 0.95-1.05 0.15-0.35 0.25-0.45 1.40-1.65 0.10 0.025 2.Product application areas: Our products have been used in all kinds of areas, such as aviation, aerospace, navigation, nuclear energy, chemical industry, electronic information, achine manufacture, petrochemical, automotive, instrument and meter, communication , transportation, and medical instruments, etc. Product sales information: Material 1.2067 Size Thickness:20mm-1000mm Length:500mm-6000mm Origin place Made in china Delivery condition Hot rolled, cold drawn, forged Surface require Black, grinding, bright, polish Heat treatment Quenched, tempered, annealed Packing Seaworthy packing , wooden case , carton, woven bag or at client's requires Delivery time In 45-60 days Trade term Exw, fob, cif Payments T/t or l/c at sight Port Wuhan port Moq 3 ton

Specifications Grade: din1.2343 / astmh11 / skd6 / gb: 4cr5mosiv Standard: aisi, astm, bs, din, gb, jis Sizes: round dia 16mm to 600mm; flat 16 - 400mm; width: 200mm-800mm Place of origin: hubei, china (mainland) Brand name: hubei Application: heavy duty hot work tools and dies: mandrels, and containers for metal tube and rod extrusion; hot extrusion equipment; tools and dies for the manufacture of hollow bodies, screws, rivets, nuts, and bolts. Dies casting equipment, forming dies, die inserts, hot shear blades, and plastic moulding dies. Smelting & shaping: ef/ esr, hot forged/ hot rolled Production route: ef/eaf+lf+vd/esr Chemical composition: C si mn cr mo v 0.33-0.420.80-1.200.25-0.504.80-5.501.10-1.600.30-0.60

Hot work tool steel H21/SKD5/1.2581 Steel grade: AISI H21, JIS SKD5, DIN 1.2581, GB 3Cr2W8V Size: round bars diameter(mm) length(mm) 50~500 2000~5800 flat steel thichkness(mm) width(mm) length(mm) 20~400 80~1000 2000~5800 Chemical composition(for reference only): C 0.30~0.40 Si 0.40 MAXz Mn 0.40 MAX Cr 2.20~2.70 W 7.50-9.00 v 0.20-0.50 P �0.030 S �0.030 Soft Annealing: Heat to 780-810°C, cool slowly. This will produce a maximum Brinell hardness of 240. Stress Relieving: Stress relieving to remove machining stresses should be carried out by heating to 650°C, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment. Hardening: Harden from a temperature of 1080-1160°C followed by air, oil or warm bath quenching. Hardness after quenching is 47-53 HRC. Tempering Tempering temperature: See the table bellow. Tempering Temperature (oC) vs. Hardness (HRC) 400°C 500°C 550°C 600°C 650°C 700°C 49 49 51 50 46 36 Charateristics: a. SKD5 Alloy steel is a hot work tool steel with dry hardening,have upper hot intensity and rigidity, under middle pemperature, b. 1.2581 mould steel have good tenacity c. Hot tirdness nature and definite wearable empty quench under lower Ao shi ti temperature condition, small distortion after heat treatment and so on. Delivered Condition: hot rolled and forged, annealed, black(ground or peeled )surface Terms of Payment: T/T, L/C, Application: Die Steel H21/SKD5/1.2581 is for making punch and die under high temperature and stress without shock load,high temperature thermal cut pieces Suitable for making of aluminum, zinc and copper alloy extrusion dies, casting dies and hot shearing blades, etc Small silver polish steel (scaled and cold drawn), which is an ideal material for ejection pins and sleeves. Also suitable for manufacture of plastic molds of high productiveity and long service life.

Steel Grade: H10 steel Standard: AISI, ASTM, BS, DIN, GB, JIS Dimensions: dia 50-500mm Place of Origin: Hubei, China (Mainland) Brand Name: BETTER Model Number: round bar Technique: Forged Application: Die Steel Barz Alloy Or Not: Is Alloy Special Use: Mold Steel Type: Alloy Steel Bar process: EF+LF+VD+ESR+EAF Packaging Details: seaworthy or your request Delivery Detail: within 45-60 days Grade: 4Cr3Mo3SiV/H10 /1.2365/SKD7 Factory state: Annealed / Ingot / Processing Surface: Machined bright, black Process: LF+VD+Forged+CCM Chemical composition C Si Mn Cr Mo V P S 0.35-0.45 0.80-1.20 0.25-0.70 3.00-3.75 2.00-3.00 0.25-0.75 �0.030 �0.030 Characteristic 1. Good hardenability and hardness 2. High toughness and tempering resistance 3. Good hot strength and abrasion resistance Quenching and tempering Quenching temperature is 1010-1040°c, oil cooling and air cooling, hardness is 50-55HRC Tempering temperature is 600--620°c, hardness is 50-55HRC; 620-640°c, hardness is 40-55HRC

1. Product introduction Gl-12119 van drop side door locks door gear flush handles and flush latches have a low price but quality is very high. Locking paddle latch is made of steel material and the paddle latches steel tool boxes surface treatment is galvanized. Ome supply and hot sale. Mainly used in cabinets , trucks , trailer trucks , heavy and metal box , aluminum tote tool boxs and the other industrials, this product hot sell in usa market. 2. Product details 2.1. Model:gl-12119 2.2. Material: steel 2.3. Surface treatment:zinc plated 2.4. Weight:1.1kg 2.5. Size:260*75mm 3.Company strength Jiaxing ganland auto parts co., ltd is a professional manufacturer specializes in designing and producing different types of machinery parts for trucks and other commercial vehicles.Gl products are exported to over 60 countries and regions, and have gained a good reputation through quality. 4. Our special service 4.1. Competitive price. 4.2. Short production time. 4.3. Package according to clients' special requirment. 4.4. Fully satisfactory after-sales service. 4.5. Heavy inquires witness our quality. 4.6. We can develop the new items as customer' special requirment. 4.7. We can accept small orders. 5. Other products We also have many other parts, like truck & trailer door lock system, door hinge system, door seal, door retainer, buckle, roller, e-track, winch, euphroe, buffer, folding step, lashing ring and other locks, hooks, latches, wrenches, aluminuim sections and container corner fittings etc.

High quality Stainless steel Stylish, flexible, removable For artists Especially useful for human body dimensions Easy to use Microblading Divider for perfect eyebrow shape.

Chemical composition (%) National brands China 50 # U.S. C50 Germany CF53 Japan S50C Sweden 1647 Chemical composition C Mn SI P S S50C 0.47-0.50 0.65-0.80 0.18-0.31 ¡Ü 0.030 ¡Ü 0.030 Delivery status Hot rolling, forging, annealing, normalizing, hardness HB180-220 Availability size: thickness 20-900mm, width 1500-2500mm, length 5000-10000mm; bar ¢20-¢800mm, length 2000-10000mm. Export standard.

Flat bar:8-90mmX305-610mm Round bar:Dia 8mm-Dia1000mm. By container