Ruik's polarization-maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output while blocking the reversed direction. 2W Optical Isolator (1064nm, Faraday Based) Features Applications Low Insertion Loss Fiber Amplifier High Return Loss Testing Instrument High Isolation MOPA Fiber Laser High Stability & Reliability Fiber Laser Specifications Parameters Value Center Wavelength 1064nm Operating Wavelength Range ±5nm Typ. Peak Isolation at 23 35dB Min. Isolation at 23 28dB Max. Insertion Loss at 23 1.7dB Max. Insertion Loss at 23 and Input Power 300 mW 2.0dB Max. Insertion Loss at 23 and Input Power 1 W 2.5dB Max. Insertion Loss at 23 and Input Power 2 W 3.0dB Max. Polarization Dependent Loss at 23, only for PI 0.2dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return Loss(Input /Output) 45dB Max. Average Optical Power 2W Max. Peak Power for ns Pulse 10kW Max. Tensile Load 5N Operating Temperature +10 to +50 Storage Temperature 0 to +60 With connectors, the handling power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's FWDM Device is a device to combine the two different wavelengths from the fibers to one output fiber. PM FWDM Device Features Applications Low Insertion Loss CATV System High Return Loss CWDM/DWDM Module High Reliability & Stability EPon/Gpon Networks Specifications Parameters Values Type 0698 5598 5506 5548 Transmission Wavelength 1020~1080nm 1520~1580nm 1520~1580nm 1535~1565nm Reflection Wavelength 960~990nm 960~990nm 1020~1080nm 1480±10nm Max.Insertion Loss of Transmission Channel 0.8dB 0.7dB 0.8dB 0.8dB Max.Insertion Loss of Reflection Channel 0.6dB 0.5dB 0.6dB 0.6dB Min.Transmission Isolation@Reflection Wavelength 25dB 30dB 25dB 25dB Min.Reflection Isolation@Transmission Wavelength 15dB 15dB 15dB 15dB Max.Channel Flatness 0.4dB Min.Extinction Ratio at 23 18dB Max. Wavelength Thermal Stability 0.003nm/ Max. Insertion Loss Thermal Stability 0.005dB/ Min.Return Loss 50N Max.Power Handling (CW) 300mW Operating Temperature 0~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
CT-24100G UAV Drone High Power 140W 2.4Ghz GPS Portable Case Jammer up to 3000m Most of quadcopters and drones use only 2.4ghz and GPS signals for their remote controls This is one of the most power 140W Jammers specialized to totally block only this two bands The effective blocking range is 1000 to 3000 meters. Do not blocking GSM Cell phones. Working time is 24 hours without stop. Frequency: 1. GPS L1 1575.42MHz 1 x 40W 2. 2.4Ghz 2400-2500MHz 1 x 100W TOTAL: 140W Jamming Range Radius 1000m to 3000m+ The jamming distance will be varied depending on the signal strength and location. Adjustable Output Power from Max to 0 (OFF) VSWR over protection for each modular Integrated battery in order option: Battery +24V / 45AH LiFePO4 can work 3-5 Hours. + 500$ Power supply: AC110 or 220-240V /DC 27V Good cooling system with Heat sink and two 2 big fans inside, low noise Dimension: CT-24100G 518 x 428 x 228 mm (Case only ) Working time: Without the time limit, May continue to work, Antenna External Omni 750mm long and Directional Patch Panel Antennas Weight 30Kg 1 Year warranty, Taiwan quality made in Hong Kong R&R GROUP INTERNATIONAL Taipei Taiwan, Hong Kong, Dubai UAE
E-beam optical coater http://www.pvd-metallizer.com Automatic optical coating equipment equipped with fan-shaped multi-fixtures or vaulted single substrate plate, uses man-machine interface with touch screen plus PLC and automatic crystal thickness control system to realize full automatic control, enabling to achieve functions of parameter input, process monitoring and data storage, etc. So the operation process can be set and the machine runs automatically to achieve the coating repeatability with optical properties of a stable quality. It has solved the complexity of manual operation and the problems of uniformity of film color, optical performance and others. Optical coating equipment can coat multi-layers of short-wave pass, long wave pass, antireflection film (AR), reflective film, filter film, spectral film, band pass film, dielectric film, high reflective film, color reflective film, etc, enabling to achieve 0-99 layers of film coating, also able to meet technical requirements such as automotive reflective light cover, binoculars, glasses, optical lenses, cold-light cups and other products coating. Equipped with different evaporation source, E-beam gun and ion source as well as film thickness monitoring and control system can realize various film coating systems, such as metal, oxide, compound and other high melting point films can be deposited, even super-hard film can be coated on the glass surface. It is extensively used in many fields such as in optical, electronic, decorative industries and in research institute or film research and application fields.
A wireless switch; Ssid broadcasting switch; Working frequency band selection: 2.4 ghz and 5 ghz; 2.4 ghz channel choice: 1-13;5 ghz channel choice: 149, 153, 157, 153, 157; Spectrum bandwidth optional: • 20 mhz, 40 mhz, automatic; 2.4 ghz wireless mode optional: only 11n, 11 bgn mixed (default), 11 bg mixed, 11g only, only 11b; 5 ghz wireless mode optional: only 11n, 11 an ixed (default), 11 a, only. Wds wireless bridge; Wireless host status display. Wireless security Wireless mac address filtering; Switch of wireless security function; 64/128/152 - bit wep encryption; Wpa-psk/wpa2-psk¡¡éwpa/wpa2 security mechanism; Function Network settings Wan connection type automatic detection; Wan connection type support: pppoe, dynamic ip, static ip; Dial-up way type: automatic dialing, manual dialing; Support the pptp, l2tp, openvpn (optional). Ddns dynamic domain name; Static routing; Dhcp settings Dhcp server; Dhcp client; Client list; Static address allocation; Port forwarding A virtual server; Special application; Dmz host; Upnp settings; Security settings Ip and mac address binding prevention of arp attacking; Ip address filtering; Mac address filtering; De dos attack prevention; Flood attack prevention; Ping packet control; System tools Traffic statistics; System security log; Remote web management; Configuration files, import and export; Tftp software upgrade; Using environment Working temperature: 0 ¡æ to 40 ¡æ; Storage temperature: - 20 ¡æ to 60 ¡æ; Working humidity: 10% to 90% rh without condensation; Store humidity: 5% to 90% rh without condensation; Carton cases
The power supply Dc 12v, 1a, Size 100 * 95 mm Wireless parameters The basic function A wireless switch; Ssid broadcasting switch; Working frequency band selection: 2.4 ghz and 5 ghz; 2.4 ghz channel choice: 1-13;5 ghz channel choice: 149, 153, 157, 153, 157; Spectrum bandwidth optional: • 20 mhz, 40 mhz, automatic; 2.4 ghz wireless mode optional: only 11n, 11 bgn mixed (default), 11 bg mixed, 11g only, only 11b; 5 ghz wireless mode optional: only 11n, 11 an ixed (default), 11 a, only. Wds wireless bridge; Radio host status display. Wireless security Wireless mac address filtering; Switch of wireless security function; 64/128/152 - bit wep encryption; Wpa-psk/wpa2-psk¡¡éwpa/wpa2 security mechanism; Function Network settings Wan connection type automatic detection; Wan connection type support: pppoe, dynamic ip, static ip; Dial-up way type: automatic dialing, manual dialing; Support the pptp, l2tp, openvpn (optional). Ddns dynamic domain name; Static routing; Dhcp settings Dhcp server; Dhcp client; Client list; Static address allocation; Port forwarding A virtual server; Special application; Dmz host; Upnp settings; Security settings Ip and mac address binding prevention of arp attacking; Ip address filtering; Mac address filtering; De dos attack prevention; Flood attack prevention; Ping packet control; System tools Traffic statistics; System security log; Remote web management; Configuration files, import and export; Tftp software upgrade; Using environment Working temperature: 0 c to 40 c; Storage temperature: - 20 c to 60 c; Working humidity: 10% to 90% rh without condensation; Store humidity: 5% to 90% rh without condensation; Carton cases
Applications Shallow reflected or shallow refracted wave surveying, transient rayleigh wave surveying, wave speed testing, ground s the world's smallest engineering seismic surveying equipment at present. 3. Built-in scrolling switch for ease of covering multiple reflected wave surveys 4. Contains all shallow seismic surveying functionality 5. Windows 2000 operating system 6. Chinese user interface 7. Water-tight keyboard and mouse buttons 8. Two usb ports 9. Signal edge trigger, ttl trigger synchronization Main specifications: Channel no: 24 Sampling interval: 25 us- 10 ms (selectable) Bandwidth: 0.1 hz - 5000 hz Programmable analog filter Low cut filter: 10-200 hz programmable High cut filter: 500-2000 hz programmable Band cut filter: 50/60 hz A/d (ifp's) precision: δ σ 24 bit Computational precision: 32 bit Equivalent noise: 1μ v, rfi (at 2.0ms sampling rate) Cross-channel interference: > 80db Harmonic distortion: -114 db (at 2.0ms sampling rate) Data display and recording: Main processor: intel pentium 500 mhz processor Memory: 118 mb Internal hard drive: 10 gb Monitor: 1024 x 512 8" svga Data transfer: usb Data storage: seg2, segy, and geopen data format System self-test criteria Static voice sound, cross-channel consistency, cross-channel isolation Main unit size and weight Size: 330x180x100mm, weight: 4.5 kg Environmental tolerances: Operating temperature: -20 to 50 deg c Storage temperature: -40 to 70 deg c Operating humidity: 0 - 95% Protecting packing
Introduction: BT02 is a miniature handset and as the name suggests connects to your mobile device via Bluetooth connection, which allows you to make or receive calls on the move or in the office. This wireless mini phone may be pretty small but it has a good selection of features including Indicator light, volume keys and a charging socket. With crystal clear sound, cute look and simple setup, BT02 can be very good for those who don't want to cause much attention by showing off their shiny new phone or wearing a Bluetooth Headset when not driving. Product Features: * 128x64 OLED Display * Caller Telephone number and Caller ID display * Phonebook Synchronization, * Support English, Chinese Simplified, Chinese Traditional * Echo Cancellation and Noise Reduction by Build in DSP Technology * Can directly make a call from the keypad * Can make a call from the phonebook contacts * Support the first letter searching contact * Support phone call history * Support HSP HFP profiles * Support Call vibration * Support Call ring tone * Support Pairing name and pair code amendment * Support keypad lock Product Specs: * Bluetooth Specification v2.1+EDR class 2, * Supports Bluetooth Headset and Hands-free Profile HFP 1.5 * Supports A2DP1.2 and AVRCP1.0 profiles, * RF Frequency Range: 2.402-2.480GHZ, 2.4G ISM band * Radio Performance: Receive Sensitivity of -90dBm, TX Power Max 4dBm * Speaker output power: * 19 Button design: 0-9 Keypad, MFB, Answer Key, Volume Button * LED Indicator Status: LED indicator light for keypad * Rechargeable 200mAh Li-Polymer Battery * Mini 5 Pin USB Plug charging Port * Charger adapter Output: DC 5V&200mA * Nominal charging time: MAX 2 hours * Talk time: Up to 6 hours * Standby time: Up to 100 hours * Dimensions: 32.5*72*11.3 mm * Weight: 26.0 g * Operating Temperature: -10~50 * Storage Temperature: -20~80.
Improving the manufacture of saws tapes, vantec launches in the market of woodworking machines bandsaw horizontal ash tape 700mm x 1 ". With rocker system. The function of the rocker is a counterweight in the mountains shake in the steering wheel, ensuring greater durability of the mountain and preventing the breakdown of that without interfering with the stability of the cut. The dimensions of the width of cut and also the width of the trough will depend on the customer's needs, and 160mm to 220mm, is optional inverter frequency by varying the speed from 0 to 38 mt.Lin / min. As required. The horizontal band saw 700mm x 1 "has three forward speeds, ensuring better performance of the machine, as well as providing a higher yield, distance between the teeth of 19mm and 1.7mm cut It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of timber and established part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, bandsaw vol horizontal 700rpm x 1 "guarantees the quality of the cut, the lowest rate of sawdust and uniformity of the gauge. Dimensions of wood: Minimum path length---------------------5mm Maximum height of the block-----------400mm Minimum length---------------------------400mm Maximum length---------------------------3.000mm Equipament: Ash------------------------------------------700mmx1" Main engine--------------------------------20cv 2p trif Engine feed---------------------------------3cv 4p Maximum width being cut---------------220mm/350mm Total length---------------------------------5.500mm Width----------------------------------------2.000mm Blade: Saw blade------------------------------------1.1/4"x0.9x4.220mm Approximate cut----------------------------1.7mm Feed rate-------------------------------------17-22-32mt/lin/min Average production head------------------198m2/h
Improving the manufacture of saws tapes, vantec launches in the market of woodworking machines bandsaw horizontal ash tape 700mm x 1 ". With rocker system. The function of the rocker is a counterweight in the mountains shake in the steering wheel, ensuring greater durability of the mountain and preventing the breakdown of that without interfering with the stability of the cut. The dimensions of the width of cut and also the width of the trough will depend on the customer's needs, and 160mm to 220mm, is optional inverter frequency by varying the speed from 0 to 38 mt.Lin / min. As required. The horizontal band saw 700mm x 1 "has three forward speeds, ensuring better performance of the machine, as well as providing a higher yield, distance between the teeth of 19mm and 1.7mm cut It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of timber and established part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, bandsaw vol horizontal 700rpm x 1 "guarantees the quality of the cut, the lowest rate of sawdust and uniformity of the gauge. Dimensions of wood: Minimum path length---------------------5mm Maximum height of the block-----------400mm Minimum length---------------------------400mm Maximum length---------------------------3.000mm Equipament: Ash------------------------------------------700mmx1" Main engine--------------------------------20cv 2p trif Engine feed---------------------------------3cv 4p Maximum width being cut---------------220mm/350mm Total length---------------------------------5.500mm Width----------------------------------------2.000mm Blade: Saw blade------------------------------------1.1/4"x0.9x4.220mm Approximate cut----------------------------1.7mm Feed rate-------------------------------------17-22-32mt/lin/min Average production head------------------198m2/h
63e1 sdh/mstp multiplexer Brief introduction Idm mstp155-63 is wide narrow-band integrated optical fiber transmission equipment base on sdh/mstp technology, it can directly connected to the remote pdh multiplexer, optical modem and multi-service optical terminal and so on, integration of sdh transmission unit, e1 crossing unit and integrated service accessing unit, to adapt to various network topology can be set as a multi-service access, sdh transmission, pdh optical access functions of the small mstp equipment. Powerful network management functions, it can configure, failure and data statistics, real-time monitoring of network performance. Features 1.Two stm-1 optical interface, provide 1 +1 channel protection. 2.Provide 2mm connector, up to support 63 e1. 3.2-channel n íß 64k (n = 0 ~ 31) of the v.35/v.11 channel. 4.Provide e1, ethernet, v.35 and voice service optional. 5.Provide 4-channel ethernet physical isolation, to achieve n íß 2.048mbps bandwidth. 6.Support point-to-point, chain-shaped and ring network. 7.Comply with the itu-t g.813 standards and fully meet the timing accuracy. 8.Powerful network management features, online real-time monitoring. 9.Standard 19-inch 1u chassis structure, easy to install. Specifications Optical interface Rate: 155mbpsía4.6ppm Fiber mode: single/multi-mode Consumption: -15 ~ -8dbm Wavelength: 1310nm/1550nm Physical connector: fc/sc Sensitivity: better than -32dbm
I Theory: Advanced technologies, bipolar radio frequency + IPL, can be used together or separately. The perfect result can be expected. The RF energy can penetrate into the dermis and the heat directly deliveries to the hair follicle. Integrating with the IPL energy, good treatment result will show you in short time. Additionally, the cooling system inside is effective on the epidermis this can greatly reduce pain in the process of treatment. II Application: 1.Eliminate wrinkles, tense skin, raise skin, with the combine of IPL and RF technology, eliminate wrinkles and raise skin of face 2.Thick black/tiny hair-removal: using the quantum emitted by E quantum, also with the effect of RF on vesica below the skin of 6mm,which are not absolutely depended on the delivery of the capillary, so great efficient on treatment of tiny light hair 3.Eliminate the dermic speckle and blood lines, improve the coarse skin obviously 4.Treatment to acne: using the special wave band kill bacillus of acne, also with the combine of IPL and RF efficiently reduce the activities of saponaceous gland. III Features: 1.Joint part adopts the most advanced í¦plug and playí¦ technology, integrating the water and electricity protection automatically, makes install more easily, safe and reliable. 2.Special technique, automatic energy adjustable system 3.8.4inch color touch screen operating, simple and convenience 4.UL standard independently adjustable three kinds of pulses design, obeying the clinic ten years experiences 5.Humanized menu, easy operation 6.Water level, water flow and water automatic detection greatly increasing machineí»s life expectancy and safety. 7.Hand-touch, foot-touch and switches satisfy your different operating habits. 8.Multilingual arbitrary languages, anywhere in the world can be easily grasped. 9.Smart system clock makes the operator control the time easily. IV Advantage 1.Remarkable effects on fuscous spot and live spot 2.Great effect on unwanted hair removal, both thick black hair and tiny hair, and comfortable during the treatment 3.Avoid burn, pigment mark and blister during former IPL treatment 4.Wide range of treatment, great effect, and with high safety factor 5.Large color touch screen, comfortable and elegant 6.Breakthrough based on traditional IPL technology. V Specifications: Light Source: six times atmospheric pressure Multi-band hand-piece: 480 nm/530nm/590nm/640nm/690nm Energy density: 50J/cm2 Max Frequency: 2s Pulse number: 1-15 Sub-Pulse duration: 0.5-10ms Pulse spaceú¦1-50ms RF Frequency 10Mhz RF Energy: 0-50 Light Spot area: 13í-30mm2 Cooling system: semiconductor+ wind + water +cooling gel Size: 42í-54í-105cm Weight: 68kg Voltage: 220Vú¿110Vú¬/15A 50Hzú¿60Hzú¬. Special features: top-safety,painless,no scar Brand name:YINHE Quality certification: CE,TUV, Capability:30 sets per month Delivery time: 5 days Place of origin: Zhejiang Packaging: Cartons & Aluminium Case Minimum order: 1 set Price term: FOB Payment terms: T/T west union Currency type: USD laser tattoo removal beauty machine.
GSM Home Alarm Systems, GSM Medical Alarm, GSM SMS Controller Alarms, GSM GPRS data Logger, GSM Telemetry Systems (M2M),GSM Gate Opener. Remote Monitoring your assets in anywhere and anytime An Innovative GPRS RTU to reduce your management costs GSM GPRS RTU Telemetry Data Logger GSM GPRS RTU Telemetry Data Logger M2M GPRS Terminal with RS485 GPRS Telemetry with SCADA GPRS Data Logger with Modbus RTU protocol GPRS Controller with Modbus RTU protocol GSM GPRS RTU Telemetry Data Logger S240 equipped Siemens MC55i quad-band GSM Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc. The features and functions of GSM GPRS RTU Telemetry Data Logger S240: 1) Quad-band Siemens MC55i GPRS Module and High-density performance line ARM 32-bit MCU inside 2) Direct connection to the GSM GPRS Network 3) Transparent Serial Data Tunneling using low cost SMS/GPRS network 4) Remote Configuration by SMS Messages or GPRS 5) Upload data via GPRS or SMS on Schedule or event occurs 6) Supports Dynamic Domain name or Static IP address 7) Supports SMS, GPRS UDP and TCP protocols 8) Supports Modbus RTU protocols 9) 1USB Port, 1 RS232 Serial Port, and 1 RS485 Serial Port 10) 6 Opto-isolated digital inputs can be programmed to NC/NO/Edge/Level type by switch, Passive Contact Type and Active Contact (3~24VDC) type can be programmed by DIP switch, DIN1 and DIN2 are Completely isolated. when alarm occurs can send Alarm Messages by SMS or GPRS or auto dial the preset phone numbers 11) 6 digital inputs can be used as Pulse Counters 12) 4 Digital Relay Outputs can be programmed as dial to switch on/off with free communication fee, alarm-linkage and Schedule to action, also can be send SMS to switch on/off 13) 10 Analog Inputs. (12 bit resolution, 0-5V or 0-20mA) 14) 2 Thermometer Inputs for DS18B20, measures temperatures from -55 AC to +125AC Fahrenheit equivalent is -67 to +257 accuracy from -10¡AC to +85 AC, Thermometer resolution is programmable from 9 to 12 bits 15) 4 Power Source Outputs for external device, like Thermometer or transducer, 3 with 3.3V/400mA, another with 12VDC/750mA 16) Supports 1 SMS Center Number and 1 IP address or 1 Dynamic Domain name 17) User friendly PC Programming Interface, it can remotely program the terminals as well as to upload the data from the terminals by SMS or GPRS, all of the Current Value or status of the terminal can be display directly, and also will display the SMS Command details while you programming it 18) More Protocols can be updated by user through USB Port with the updated firmware 19) Power supply 9V to 24V(Recommend 12VDC) 20) Size: 168mm*113mm*32.3mm. Standard packing list of GSM GPRS RTU Telemetry Data Logger S240: 1X Mainframe 1X AC/DC adaptor 1X User Manual(CD) 1X GSM ANT PC Configurator is free charge in the CD With internal back up battery. 1X Mainframe 1X AC/DC adaptor 1X User Manual(CD) 1X GSM ANT PC Configurator is free charge in the CD.
Ruik's Tap Isolator is the device hybrid of coupler and isolator. PM Tap Isolator Features Applications Low Insertion Loss Compact Fiber Amplifiers High Return Loss Compact Fiber Optical System High Extinction Ratio Fiber Laser High Isolation Fiber Sensor Specifications Parameter Value Stage Single Dual Single Dual Operating Wavelength Range1550±15nm 1064±5nm Max. Excess Loss 1.0dB 1.2dB 2.2dB 3.5dB Signal Tap Ratio 1±0.2%, 5±1%, 50±2% Typ. Peak Isolation 40dB 52dB 40dB 52dB Min. Isolation at 23 28dB 45dB 28dB 45dB Min. Extinction Ratio at 23 20dB Min. Return Loss 50dB Max. Optical Power(CW) 500mW Max. Tensile Load 5N Operating Temperature 0~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Tap Isolator is the device hybrid of coupler and isolator. PM Tap Isolator Features Applications Low Insertion Loss Compact Fiber Amplifiers High Return Loss Compact Fiber Optical System High Extinction Ratio Fiber Laser High Isolation Fiber Sensor Specifications Parameter Value Stage Single Dual Single Dual Operating Wavelength Range1550±15nm 1064±5nm Max. Excess Loss 1.0dB 1.2dB 2.2dB 3.5dB Signal Tap Ratio 1±0.2%, 5±1%, 50±2% Typ. Peak Isolation 40dB 52dB 40dB 52dB Min. Isolation at 23 28dB 45dB 28dB 45dB Min. Extinction Ratio at 23 20dB Min. Return Loss 50dB Max. Optical Power(CW) 500mW Max. Tensile Load 5N Operating Temperature 0~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's polarization-maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output while blocking the reversed direction. 3-port High Power PM Isolator (1064nm, 1030nm) Features Application Low Insertion Loss Polarization Maintaining Fiber Amplifier High Return Loss Testing Instrument High Isolation Mopa Fiber Laser High stability & Reliability Fiber Laser Specifications Parameters Value Center Wavelength 1064nm , 1030nm, 980nm Operating Wavelength Range ±5nm Typ. Peak Isolation at 23 30dB Min. Isolation at 23 25dB Typ. Insertion Loss at 23 0.6dB Max. Insertion Loss at 23 0.8dB Max. Polarization Dependent Loss at 23, only for PI 0.2dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return Loss(Input /Output) 45dB Max. Average Optical Power 100W Max. Peak Power for ns Pulse 20kW Max. Tensile Load 5N Package Dimension 82x38x35mm Operating Temperature +10~+50 Storage Temperature 0~+60 Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Manual Variable Optical Attenuator is used for reducing the light power, by blocking the light with a screw. PM Manual Variable Optical Attenuator Features Applications High Precision Optical Communication Systems Test Wide Attenuation Range Optics Laboratory Low Insertion Loss Specifications Parameter Value Center Wavelength 1310nm 1550nm 1064nm Operating Wavelength Range±40nm ±40nm ±20nm Attenuation Range 0.6~60dB 0.6~60dB 0.6~60dB Max. Insertion Loss 0.6dB 0.6dB 0.6 dB Min. Return Loss 50dB Adjustment Precision 0.02dB Min. Extinction Ratio at 23 20dB Max. Power Handling 500mW Operating Temperature 0 ~ +70 Storage Temperature -40~+85 Package Dimensions 26x18x8mm For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's polarization-maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output while blocking the reversed direction. High Power Optical Isolator (TGG Based) Features Applications Low Insertion Loss PM Fiber Amplifier High Return Loss Testing Instrument High Isolation Mopa Fiber Laser High stability & Reliability Fiber Laser Specifications Parameters Value Center Wavelength 1064 or 1030 or 980 or 915 or 850 or 780nm Operating Wavelength Range ±5nm Typ. Peak Isolation at 23 30dB Min. Isolation at 23 25dB Typ. Insertion Loss at 23 0.8dB Max. Insertion Loss at 23 1.0dB Max. Polarization Dependent Loss at 23, only for PI 0.15dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return Loss(Input /Output) 45dB Max. Average Optical Power 10W or Specified Max. Peak Power for ns Pulse 10kWor Specified Max. Tensile Load 5N Package Dimension 58x28x26mm Operating Temperature +10~+50 Storage Temperature 0~+60 With connectors, the handing power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
1. Characteristics of XYX-3 wheeled hydraulic core drilling rig ·The drilling rig is equipped with wheeled walking mechanism and hydraulic cylinder support, which is convenient for the whole machine to be relocated and easy to adjust the level of the drilling rig. ·Using the ball card holding mechanism to replace chuck,can implement non-stop down rod,convenient operation,safe and reliable. ·With oil pressure feeding mechanism to improve drilling efficiency ·The pressure gauge is provided with the pressure gauge of the bottom of the hole, so it is easy to master the hole in the hole. ·The lifting and falling tower is hydraulic operation, which is convenient and reliable. ·The diesel engine uses electric start to reduce the labor intensity of the worker. 2. Parameters of XYX-3 wheeled hydraulic core drilling rig Drilling depth 100/ 250 / 300/ 600 m Maximum opening diameter 300 / 200 /150 / 75mm Max open hole caliber 300mm Final hole diameter 75mm Drill pipe 60mm Borehole inclination 90°-65° A vertical scroll of painting Vertical rotation speed of vertical axis 30-1050r/min Vertical reversal speed 29-137r/min Vertical axis stroke 560mm Diameter of shaft inner hole 96mm Vertical axis lifting capacity 60kn Main hoist (hydraulic drive) Single rope lifting speed 0-45m/min Wire rope diameter 14mm Band width 90mm Drum diameter 300mm Reel capacity 30m Maximum lifting capacity of single rope 40kn Auxiliary hoist (hydraulic drive) Drum diameter 140mm Diameter of steel wire 6mm Reel capacity 450m Mud pump Mud pump BW-250 Horizontal three cylinder Flow 250 l/min Working pressure 7mpa Inlet diameter 75mm Outlet diameter 50mm Gear oil pump Double oil pump CBF-F63/25 Front-end flow pressure 63 l/min 20mpa Backend flow pressure 25 l/min 20mpa Rig power Diesel engine FAW Xichai 4 cylinder Electric machinery Y180L-4 22KW Wheeled chassis Bearing capacity of wheel chassis 3.5t Wheel chassis length 2.6m Wheel chassis width 2m Wheel chassis height 0.6m
1.Overview 54LED x 3W RGBW Par Lights Great for Club, Dj Show, Home Party, Ballroom, Bands, Show bar etc. 54 x 3W RGBW Par Lights: It use the latest LED technology, Adopt 54 lights(RED 12 + GREEN 18 +BLUE 18 +WHITE 6) Multiple Control Modes: DMX512 / Auto / Sound Activated/ Master-Slave, 8 channels Aluminum Alloy Housing: our par light is made of engineering Aluminum shell, light weight, durable Super Bright: 162W high brightness sage lights, perfect for KTV Party Wedding Show Club Pub Disco DJ and scale performances. Its light spot on the wall, the effect likes glass ball, bright and powerful. Extremely Long Life: Light Source of this stage lighting lifespan up to 50,000 hours will be achieved under normal operational conditions 54 x 3W LED Par Lights :Each 3w high power leds, high brightness and low power consumption, bright color and so on. DMX512 / Auto / Sound Activated/ Master-Slave 8 Channels :This par lights connect 512 signal controller, can pull up numerous kinds of color effect, stroboscopic effects, etc. Skill Specifications: Beam Angle: Approx.25 degree. Dimming: 0%~100%. Connector: 3 Pin XLR. Par lights come with double handles :Double handles with two holes , can be self-supporting, can be hung, more conveniently. Sound Active :This Par light features sound activated function will reflect to music, voice, and beat. Auto Setup :A variety light/ automatically switches 2.Specifications: Features: Full color changing effect, strobe, LCD protection. Light source: 54 x 3W LED(Red 12/ Green 18/ Blue 18/ White 6) Control mode: Sound-activated/ Auto-play/ DMX/ Master-slave Power Supply: 100-240VAC, 50-60HZ Light Source Lifespan: 50000 hours Total power: 180 W LED angel: 25° DMX channel: 8 channels Power Cord Length: 27.56inch (70cm) Plug Type: US Standard Packing: 4 pcs/carton Product package size: 9.25x 9.25x 11.61inch (235*235*295MM) Product package weight: 5.64lb (2.56KG) 3.Package include: 1 X 54*3W LED Par lights 2X Brackets 2 X Screws 1 X English Manuel