Carbon Nano Tube CNT Copper Foil Thermal Conductive Tape Descriptions: CNT Copper Foil Tape, also name Carbon Nano-tube (CNT) Copper Foil Thermal Conductive Tape, coated one layer of Nano carbon on the surface of the copper foil, coated with the not conductive acrylic adhesive on the other sided. Features: Excellent thermal conductivity. Reliable ESD ground and EMI shielding. Comparing with graphite, CNT film does not peel off during cutting process. Flexible, reusable, re-workable and cost effective. Applications: Mobile, Phone, Pad, Industrial Computer, TV, LED.
Descriptions: Teflon PTFE Thread Seal Film Tape of Xinst brand is an ideal tape for sealing, which is widely applied in construction machinery, chemical industry and other areas, especially in pipe linking systems such as building sealing tape. With excellent characteristics of our tape such as sealing insulativity, acid-resistance, and corrosion-resistance, it can be widely used under all conditions for a long term. Features: Pressure: to 10,000 PSI (690 BAR) Sealing temperature: -450°F to 500°F (-268°C to 260°C) 3 mils thick and made with PTFE for greater sealing power Applications: Pipe thread sealant for oxygen systems Water pipe head seal
Descriptions: Insulation Pure Teflon PTFE Film Tape is based on pure Teflon film, single-sided coated with high-temp resistant pressure sensitive adhesive.The PTFE Tape are widely applied in the conduct roll for resistance of high temperature, acid, alkali and non-stain of the surface, protecting with the low friction of heating up flat, pulling off of the plastic model, joining and binding up cable of high temperat-ure and high-pressure with anti-static, protecting with the electrical components joi-ning in hith temperature, affixing of the hot plastic parts. It can be used conveniently, long-lived and have good insolation. This tape can be well used in the temperature range of -60°C ~+260°C. Features: It has very pesistant adhesion and can adhere reliably in a temperature range of -60°C to +260°C Easy to wash away the blot or other dust on the surface such as resin, coating material, etc. High chemical corrosion resistant: it could resist acid, alkali, aqua fortis and various kinds of organic liquid corrosion. Capability of medicament resistant and non-poison, almost to resist all kinds of medicament. High capability of insulation. Fireproofing and flame resisting. Easy to use and install, reusable, and own long using life. Applications: Sorts of high temperature roller submerging, works of calefaction slab, membrane doffing. Heat sealing of food, pharmaceutical and plastic bag. Cushion pasting of slippery pond, stuff funnel, aircraft mould, etc, it also could be used on platern, thermoplastic doffing module. Suitable for other surface disposal such as glue proofing, corrosion resistance, high temperature resistance. Used in the fields of packing (including thermoplastic, vacuum bagging),compositing, thermoplastic seal, electronic and electric.
Light Shielding PET Film Black And White Double Sided Tape For TFT-LCD Descriptions: Black and white tape consists of a white PET film carrier coated with black color, and a high performance acrylic adhesive. It features excellent initial tack and good convertability. Features: Good adhesion to many kinds of materials including most plastics, glass and metals. Excellent light insulation. High light reflectance. Easy converting by die-cutting. Applications: Light insulating applications in electronic devices. General purpose indoor and outdoor joining and mounting applications. Holding and bonding in electronic device components like BLU bonding to LCDs,BLU module bonding or appliance bonding.
Equivalent To Tesa 4965 PET Film Double Sided Adhesive Tape Descriptions: PET Film Double Sided Tape is polyester film, double coated with an aggressive permanent acrylic adhesive system. It offers a wide temperature range and can be used for bonding a variety of films, including flexible substrates. This double sided polyester tape is used for splicing, mounting, bonding and application of decorative parts. Ultra-Thin PET film double sided tape is use ultra-thin PET film double sided coated with acrylic adhesive. Features: Excellent adhesion strength. Superior holding power. Good temperature resistance, Ultra-Thin thickness. Applications: Fixing mobile phones, computers, auto parts and other plastics, metal, electrical components. Coated with EVA foam, PE foam, PORON foam, then die cut. For bonding LCD backlight module frames, shading and reflecting. Bonding ferrite with objects or FPC with stiffener. Bonding graphite with phone cover or chips, and do not affect the graphite thermal conductivity.
ESD Anti-static PVC Warning Tape Descriptions: Anti-static PVC Tape,also call ESD warning and marking tape,it is made of excellent pvc film, coated with high quality pressure sensitive adhesive. PVC film surface printed with ESD symbol and "Caution, Static Sensitive",used for floor marking in "Electrostatic Protected Areas" (EPA) , heavy duty and abrasion resistant. Features: The esd marking tape is heavy duty and abrasion resistant. Compatible with floor cleaners. Color: yellow with black printing. Applications: ESD marking or warning. ESD protected area.
High Temperature Double Sided Kapton Polymide Film PI Tape Descriptions: Double Sided Kapton Polymide Film PI Tape,also call Double Sided Polyimide Film Tapes,they are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They can withstand temperatures of up to 500°F/(260°C). Double Sided PI Tape offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance. Features: Thin and conformable enabling masking of uneven surfaces Wide operating temperature range up to 500°F Removes cleanly without adhesive residue after exposure to heat High performance silicone adhesive High strength backing provides superior resistance to puncture and tear Resistance to chemical attack Applications: High Temperature Masking Insulation on Transformers, Motors and Coils Powder Coating Protection of circuit board gold finger contacts during wave solder Solar Panels
Double Conductive Tin Plated Copper Foil Tape For EMI Shielding Descriptions: Tin Plated Copper Foil Tape consists of an embossed deadsoft tin-plated copper foil backing and an aggressive pressure-sensitve acrylic adhesive. The edgs of the embossed pattern pressed into the foil cut through the adhesive layer to establish reliable metal-to-metal contact between the backing and the application substrate. Features: Good electrical conductivity from the base material through the surface of viscose to foil substrate. With good shielding effect. Applications: Used for high-end electronic equipment, components of the grounding and EMI shielding, the tin on the plating layer has good weld-ability, and high oxidation and corrosion resistance.
Conductive PET Mylar Copper Foil Tape Insulation Copper Foil Tape For Soldering Descriptions: Mylar copper foil tape is composite material consisting of copper foil laminated onto a polyester film base, and this is suited to fields which demand electrical characteristics. Then copper foil sided coated with conductive or not conductive acrylic adhesive. Features: The PET film can protective the copper foil from damaged and oxidized. The copper foil is conductive. the PET film is Insulation effect. Applications: Computer peripheral wire EMI shielding Used in coaxial cable, local area network wire and electronic communications cable, and other needs of anti interference shielding. Electronic equipment shield FPC Electric wire shield
Descriptions: Double Copper Foil Tape is as a smooth copper (purity is 99.95%) foil that also has an adhesive coating, but this adhesive coating is also conductive. The unplated copper with conductive adhesive is a common EMI shielding tape for non-corrosive conditions. Features: Good viscosity, Cold resistance Mechanical resistance, Moisture resistant High heat and electric conductivity Excellent ductility and corrosion resistance Flame retardant Easy to tear apart Applications: Electric and electric springs, switches Lead frames Connectors and oscillation reeds Battery Communication cable Cable armoring Mobile phone main board Ion battery production lamination with PI film PCB collector (electrode backing) materials
Single Sided Conductive Adhesive Copper Foil Acrylic Adhesive Tape Descriptions: Single Copper Foil Tape is as a smooth copper (purity is 99.95%) foil backing with a not conductive acrylic pressure-sensitive adhesive and liner. The unplated copper with conductive adhesive is a common EMI shielding tape for non-corrosive conditions. Features: Dead soft copper foil backing for good shielding effectiveness, soldering and converting (slitting and die cutting). Acrylic pressure-sensitive adhesive has good resistance to heat, oxidation, solvents and oils. Removable liner on adhesive side makes it easy to handle, protect the adhesive prior to application and die cut complex shapes. Applications: Commonly used for RFI/EMI (radio-frequency interference or electromagnetic interference) shielding and ESD (electrostatic discharge) grounding for components, integrated circuits, connectors, cables, motors, equipment enclosures/cabinets and shielded rooms. Conductive circuit or bus bar for low voltage applications Used in jobs requiring high conductivity or shielding effectiveness for a given thickness. Best used in non-corrosive environments.
PET Laminate Mylar Aluminum Foil Tape For FFC Descriptions: Mylar aluminum foil tape is composite material consisting of aluminum foil laminated on to a polyester film base, and this is suited to fields which demand electrical characteristics. Then aluminum foil side coated with conductive or not conductive acrylic adhesive. Features: The PET film can protective the aluminum foil from damaged and oxidized. The aluminum foil is conductive. the PET film is Insulation effect. Applications: Computer peripheral wire EMI shielding Used in coaxial cable, local area network wire and electronic communications cable and other needs of anti interference shielding. Electronic equipment shield Soft FFC of TV Electric wire shield
Descriptions: Conductive Double Sided Tape is consists of a unique electrical conductive pressure-sensitive acrylic adhesive and a high quality release liner.Xinst411T provides a better way for applications requiring excellent conductivity.Besides,Xinst411 transfer tape is made of a unique PSA to assure the adhesion to many kinds of substrate such as conductive fabric, aluminum foil, copper foil and so forth. Features: Offer wide range of usage and service temperatures. Excellent electrically conductive performance Supplied on a removable liner for easy handling and die-cutting. Thinner for avoiding remaining adhesive residual after slitting. Applications: EMI shielding applications in mobile phone, notebook, PC and others electronic products. EMI shielding applications in connector, FFC and wire stock etc. Die cut pieces and laminate.
Descriptions: Copper foil glass cloth tape is copper foil laminated to glass cloth with silicone adhesive can be use for EMI shielding. Features: Shield against EMI/RFI radiation The tape is conductive throughout, including the adhesive, and offers mechanical, electrical, and thermal values to meet shielding requirements Applications: mainly used in all kinds of electronic products, high frequency transformer transmission cover or isolate the interference with the electromagnetic wave or radio waves.
Descriptions: Double sided glass cloth tape is with imported glass cloth as the basic carrier, and coated with the pressure-sensitive silicone adhesive on both sides, and combined with the fluorine release liner. It has excellent high temperature resistance, easy removal, and good adhesion. Especially because of it's excellent high tempearture resistance, it can also be. It features good temperature resistance, good tensile strength, good chemical resistance, no residue, in line with ROHS and halogen free etc. Features: Good stability, can work under 260 â?? for a long time, can withstand 260â?? high temperature short time. No adhesive residue, high temperature for a long time after curing tear tape, leaving no residue. Applications: Mostly applied in the fixation of the surface board and the other parts during the production process of the electrical parts of digital products. Used for the temporary fixation, masking and protection of the accessories under high temperature process
Die Cutting Custom Size Poron Foam Gasket Tape Foam Strips Product Description PORON is a fine pitch open cell urethane foam produced by Rogers Corporation. The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns. Poron Foam tape Features: Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required. Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices. Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications. Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface. Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies. Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side. Poron Foam tape Applications: Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications. For Sealing, Gasketing, and Cushioning.
OCA Optically Clear Double Sided Adhesive Tape For Touch Panel Descriptions: OCA(Optically Clear Adhesive) double sided tape are highly specialized optically clear free-film adhesives offering superior clarity and excellent adhesion to various types of transparent substrates. They are easy to convert and are contaminant-free, resulting in improved bubble resistance in laminations exposed to high temperature and high humidity. Common applications include displays, touch panels and others requiring an optically clear bond. Features: Superior transparency. Very little change in appearance even when exposed to light or in a hot and humid climate. Suitable for bonding materials such as glass and polycarbonate to plastics. Manufactured in a clean room. Outgassing of plastics such as polycarbonate controls bubble formation and allows ink to follow uneven surfaces. Applications: Touch screens- for bonding film and glass laminates. Avionics/military displays. Transparent graphic overlays. Optical management films for LCD. Projection screens.
Manufacturer Cleanroom Anti-Static ESD PET Tape Descriptions: ESD PET Tape is use silver PET film as materials, it is use the high performance adhesive tape for anti-static function. With both side ESD treated, it is recommended to use in the cleanroom and ESD function required places. Features: Made from durable PET material. Reliable ESD protection. Applications: Packing tape for sensitive semiconductor devices ideal for glass and acrylics in cleanroom where conductivity is needed. EMI shielding, sealing ESD bags or ESD containers and grounding of shelving units. To make resin surface of tools used in cleanrooms conductive.
Self Adhesive BOPP Tape, Pvc Shrink Roll, Rakhi .
Apperance: Smooth&bright Colour: transparent Thickness: 25um(1mil)~125um(5mil) Width: 0.05~1m Alternative: Dupont kapton polyimide film HN Storage: In dry condition Shelf life: 8 years if storage safety Materials: PMDA, ODA and DMAC Application condition: High temperature and voltage condition Major customer: Alston and Moto China Factory This polyimide film is similar Dupont Kapton HN, but compared with Kapton HN that is more economical. Like properties of other polyimide film, this thermal conductive polyimide film with good thermal conductive property, could work at the condition from -269â?? up to 400â??. This polyimide film designed by our factory is absolutely alternative to dupont kapton HN, has excellent dielectric strength, electric dissipation factor, wide temperature range, chemical resistance at elevated temperatures, compared with Dupont Kapton HN that is more economical. Certification: ISO9000:2008, UL, SGS Mainly used in electrical and electric insulation application: 1) Formed coil insulation 2) Substrates for FPC 3) Motor solt liner 4) Magnet wire insulator 5) Transformer and capacitor insulation 6) Magnetic and PSA tape 7) Tubing Thickness from 25um up to 175um, width from 5mm up to 1m could be cut by customerâ??s requirement. The film will be provided in rolls and fixed on to the pipe core. Each roll is well packed in plastic bag to be placed into dry and clean box. Delivery Time: prompt Our other high performance materials: Polyimide film coated with FEP Polyimide film PSA tape coated with Acrylic Pressure Sensitive Adherence Corona resistant polyimide film Corona resistant polyimide coated with fep CR polyimide film mica tape CR polyimide film PSA tape For more information on Kapton (polyimide) film or other high performance materials, Please contact your representative.