Carbon monoxide (CO) is a very toxic gas with TLV of 35 ppm and it is to be removed from the air in mines, enclosed spaces, fire breaking places. Active carbon can not hold the CO due to physisorption and therefore palladium impregnated carbon was developed which became even more active due to high RH. This again one of the very specialized carbon exported by us for air purification and CO removal. It almost works like the turn over catalyst and offers very high protection against CO. This carbon has High Surface area providing almost offers endless protection against CO, Works in any RH but becomes more active at high RH.
(Color Taste Odor Removal) - We are leading exporter of Activated Carbon Blocks, made from high Surface Area, low ash coconut based Activated Carbon with high adsorption efficiency and contaminant removal capacity. The CTO Blcks have high adsorptive capacity that simultaneously removes chlorine, bad taste, odor and organic chemicals that contribute to bad taste. They are suitable for use as Pre and Post Reverse Osmosis Systems in CTO BLOCKS (Color Taste Odor Removal) residential and commercial water purification. Size & Diameter can be customised as per buyer's requirement.
IRON REMOVAL BLOCK - Iron is one of the major problem in ground water of many areas in India. Excessive levels of iron above 0.3 mg/l in water, may lead to many problems in usage and also adverse health effects. Iron will be in the form of Fe2+, Fe3+ and as few more other compounds in dissolved state in water. Iron imparts color in water if it is excessive, which leads to aesthetic effects in water. If it is used for laundry application, affects the color of the white fabric. Size & Diameter can be customised as per buyer's requirement.
Exhaust gases from several industrial and production units where coal or sulfide ores are used, contain sulfur-containing toxic gases and vapors such as sulfur dioxide, hydrogen sulfide, carbon disulfide, and several organosulfur compounds. These industrial gases need to be desulfurized effectively before mixing with the environment. Sulfur can also be removed with the use of activated carbons. Flexus Global speciality activated carbons are promising adsorbents for SO2 and sulfur-containing toxic gas removal due to their high efficiency and regenerative capacity.
Formaldehyde and other aldehydes are the main pollutants in indoor air. Formaldehydes are mainly obtained from paint, polymerizing plates, bindings, chemical fibers and even cigarette smoke Activated carbon adsorbents are the most promising adsorbents when adsorption of traces of gases and vapors is concerned. Our impregnated activated carbons offer effective chemisorption of formaldehyde from air.
Impregnated activated carbons assist with removal of odorous sulphur compounds in sewage pumping stations, personal protection respirators, and removal of corrosive gases from air intake systems specifically in electronics manufacturing facilities, museums etc.
Flexus Global provides filter media which protect against acid gases and alkaline species such as ammonia gases and its derivatives from air and gas streams. Available in Different Mesh Sizes as per Buyer's Requirement.
Among its numerous sources, coconut shells have gained significant attention as a sustainable and efficient raw material for producing high-quality activated carbon. Coconut shell-based steam-activated Carbon is mainly used for the removal of chlorine, organic contaminants, color and odor from drinking water to make it suitable for human consumption. Being microporous in internal structure, coconut shell activated carbon is well suited for organic chemical adsorption, including volatile organic chemicals. - One of the prominent applications of coconut shell-based activated carbon is in water treatment processes. It effectively removes impurities, organic contaminants, and heavy metals, ensuring clean and safe drinking water. - It acts as a decolorizing agent, removing impurities and unwanted odors from edible oils, beverages, and food products finding its application in the food and beverage industry. Additionally, it is employed in the purification of sugar syrups, ensuring high-quality and clear syrup for various confectionery and beverage manufacturing processes. - It serves as an excellent adsorbent in the production of drugs, where it eliminates unwanted impurities, colorants, and traces of heavy metals making it ideal choice in pharmaceutical industry too. The high purity and porosity of coconut shell-based activated carbon make it a preferred choice for pharmaceutical manufacturers to ensure product quality and safety.
Whetlerite carbons are Cu, Cr and Ag impregnated activated carbons used for respiratory protection against super toxic nerve, blister, blood and choking agents in the military. Whetlerite carbons are used in nuclear, biological and chemical (NBC) filters for collective protection, and in NBC canisters, as part of individual gas masks, for personal protection. Flexus Global exports impregnation of active carbon and whetlerite carbon to various countries.
Powder activated carbon
Granular activated carbon
Pelletized Activated Carbon
Activated carbon, also known as activated charcoal, is a highly porous form of carbon with a large surface area. It is created by processing carbon-rich materials, such as coconut shells, wood, or coal, at high temperatures to activate their adsorption properties. Activated carbon is widely used for adsorption and purification processes, including water treatment, air purification, and removal of contaminants from gases and liquids. It is known for its ability to adsorb a wide range of impurities, including toxins, pollutants, and odors.
Hallo we supplying EN 590 10 PPM and 50 PPM AND Jet fuel A 1 - Origin Kazhakstan Very genuine refinery - we have on going contracts - we work with 4 legit sellers Only serious buyers who can provide ICPO with BCL Supply capacity - 700-1000 K per month Long chain brokers please dont contact unless have direct contact with END buyer Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional )
Jet A1 Fuel FOB PRICE Aviation Turbine Fuel (JPA1) Trial Quantity: 2,000,000 BBLS Contract Quantity: 10,000,000 BBLS Delivery: Tank to Tank Origin: Kazakhstan Loading Port: Rotterdam Inspection: SGS Payment: MT 103 Swift Bank to Bank on Invoice FOB TTT PROCEDURE 1. The Buyer Issue an ICPO. Containing the seller's work procedures and Banking Details along with TSA (TANK STORAGE AGREEMENT), Buyer Certificate of incorporation, Company Profile (CP) and International Passport Copy of the CEO. 2. Seller issues ICC Warning Letter and Commercial Invoice (CI) of products in tank at port, buyer signs and returns the documents with acceptance and commitment letter stating to adhere to seller procedure. 3. The seller issues a copy of the SGS Report strictly JUST to the buyer's Tank farm Company only to verify the SGS Report. 4. after confirmation of successful verification of SGS Report only by Buyer's Tank Farm Company. The Buyer pays his Tank Company for 5 Days TSR and sends his TSR to the Seller. All Parties must sign NCNDA and IMFPA for endorsements. 5. The seller issues the following POP documents to the buyer; (a) SGS report for quality and quantity not older than 48 hours (b) Product Certificate of Origin (c) Product injection report (d) Tank storage receipt with full GPS coordinates (e) Unconditional dip test authorization letter (f) Authorization to sell and collect (i)Q&A 6. After verification of the documents, the injection will be commenced and after injection the buyer makes payment for the total value of the product injected into the tank via MT103-TT. 7. After receiving confirmation of Buyer Payment, the seller immediately transfer the title ownership to the buyer. 8. Seller sends payment of all intermediaries involved in the transaction 24 hours after receiving confirmation of Buyer Payment as per signed & sealed NCNDA/IMFPA which is notarized by Public Notary in Kazakhstan and then monthly remittance is continued as per terms and terms of the contract of sale and purchase agreement t between the buyer and seller.
Hallo Good Day we can offer Jet fuel EN 590 10 ppm and trusty refinery which we already dealing Kazak and Qatar Origin available Buyers who interested , kindly contact iur wats up - 0091 9895009900 or e-mail - mujib@algagroup.in Only genuine buyers please - prefer mandates/ intermediates who knows the buyer well with previous succesful transactions Aaiting your reply MUJIB ALGA GROUP
Multi-purpose. cutting, milling, shearing, sawing, reaming, drilling, tapping, threading, turning processes
Pre-baked Carbon Anode carbon anode block (Pre-baked Carbon Anode / carbon anode block / Carbon Anode Scraps ) is a neutral refractory product made of carbonaceous as raw materials, adding appropriate amount of binder. Carbon anode block raw materials include anthracite, coke and graphite, as well as asphalt, tar and anthracene oil and other bonding agent. AS anthracite volatile less, and has dense structure, carbon anode block use it as aggregate, adding metallurgical coke (coal), and asphalt as a binder.
Petroleum jelly� Vaseline Petroleum jelly is a kind of petroleum grease, which is refined by blending residual oil wax paste with lubricating oil, and is an important lubricant for medicine, daily chemical industry, fine chemical raw materials and precision instruments. The Vaseline products in our country are mainly concentrated on the pharmaceutical Chemicalbook Vaseline, divided into pharmaceutical white Vaseline and pharmaceutical yellow Vaseline two kinds. Pharmaceutical Vaseline is mainly used to prepare ointment, skin protection ointment and cosmetic raw materials, and can also be used as anti-rust lubrication materials for medical instruments and precision instruments.
Moisturizing skin: white Vasoline applied on the skin can provide a good protective barrier for the skin, bring good moisturizing effect to the skin and safe without irritation, very suitable for dry and dehydrated skin. Main Ingredient PETROLATUM Function Emollient Volume 170 kg per drum
