The CPI-1515 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high-performance additive package. The lubricants are specifically formulated to give negligible solubility or dilution in hydrocarbon gases These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) within the gas stream. Corrosion protection, low pour point and excellent lubricity ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1515 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and negligible dilution with hydrocarbons means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. Applications and Compressor Type Flooded rotary screw compressors Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Insignifi cant dilution in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased efficiency, reduced cost of operation
The CPI -1515 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high-performance additive package. The lubricants are specifically formulated to give negligible solubility or dilution in hydrocarbon gases These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) within the gas stream. Corrosion protection, low pour point and excellent lubricity ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1515 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and negligible dilution with hydrocarbons means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. Applications and Compressor Type Flooded rotary screw compressors Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Insignifi cant dilution in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased efficiency, reduced cost of operation
The CPI -1515 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high-performance additive package. The lubricants are specifically formulated to give negligible solubility or dilution in hydrocarbon gases These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) within the gas stream. Corrosion protection, low pour point and excellent lubricity ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1515 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and negligible dilution with hydrocarbons means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service intervals. Applications and Compressor Type Flooded rotary screw compressors Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Insignifi cant dilution in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased efficiency, reduced cost of operation
CPI -1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI-1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI-1507-32 Viscosity @ 40C, cSt, ASTM D445 31.72 Viscosity @ 100C, cSt 5.28 Viscosity @ 100F, SUS 165.0 Viscosity @ 210F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60F, ASTM D4052 9.43 Pour Point F (C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F (C), ASTM D92 350 (177) Fire Point, C.O.C.,F (C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications
CPI-1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI -1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI -1507-32 Viscosity @ 40 C, cSt, ASTM D445 31.72 Viscosity @ 100 C, cSt 5.28 Viscosity @ 100 F, SUS 165.0 Viscosity @ 210 F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60 F, ASTM D4052 9.43 Pour Point F ( C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F ( C), ASTM D92 350 (177) Fire Point, C.O.C., F ( C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications.
CPI -1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI -1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI -1507-32 Viscosity @ 40 C, cSt, ASTM D445 31.72 Viscosity @ 100 C, cSt 5.28 Viscosity @ 100 F, SUS 165.0 Viscosity @ 210 F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60 F, ASTM D4052 9.43 Pour Point F ( C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F ( C), ASTM D92 350 (177) Fire Point, C.O.C., F ( C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications.
CPI -1507-150 is a polyalkylene glycol lubricant, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of this lubricant is to withstand dilution by hydrocarbon gases is particularly advantageous in liquid ring vacuum pump and centrifugal compressors handling high concentrations of hydrocarbon and gasoline vapors. CPI-1507-150 is a heat-stable polymer in the absence of oxygen. It is soluble in water. Test Procedure CPI-1507-150 Viscosity @ 40C, cSt, ASTM D445 115.1 Viscosity @ 100C, cSt 17.61 Viscosity @ 100F, SUS 587 Viscosity @ 210F, SUS 90.5 Viscosity Index, ASTM D2270 159 Density, lb/gal, 60F, ASTM D4052 9.27 Pour Point F (C), ASTM D97 22 (-5.6) Flash Point, C.O.C., F (C), ASTM D92 495 (257) Fire Point, C.O.C., F (C), ASTM D92 540 (282) Specific Gravity, ASTM D4052 1.11 These are typical values and are not intended for use in preparing specifications.
The CPI-1507 Series compressor lubricants are formulated using a premium polyalkylene glycol (PAG) base fluid combined with a high-performance additive package. They are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent oxidative and thermal stability enabling the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1507 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1507 Series fluids are especially advantageous in high temperature and heavy gas stream applications due to their excellent thermal and oxidative stability and negligible hydrocarbon dilution. Applications and Compressor Type Flooded rotary screw compressors Heavy hydrocarbon gas stream applications Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Excellent lubricity Increased efficiency and reduced cost of operation Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
" The CPI-1507 Series compressor lubricants are formulated using a premium polyalkylene glycol (PAG) base fluid combined with a high performance additive package. They are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent oxidative and thermal stability enabling the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1507 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1507 Series fluids are especially advantageous in high temperature and heavy gas stream applications due to their excellent thermal and oxidative stability and negligible hydrocarbon dilution. Applications and Compressor Type Flooded rotary screw compressors Heavy hydrocarbon gas stream applications Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Excellent lubricity Increased efficiency and reduced cost of operation Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
Products such as diesel en590 50 /20 /10 ppm, diesel gas d2 oil gost 305 82, ago (automotive gas oil), jet fuel a1, aviation kerosene jp54, ulsd, hsd oil, diesel d6, mazut m 100 gost 10585 75/99, light cycle oil (lco), cst fuel, base oil sn 150, sn 500, bs150, bitumen, urea, sulphur, potash.Fob and cif aswp, contracts direct buyer with refinery
PAO 4 - 10 CST Product Uses: The 4-10 CST PAOs are used as synthetic base fluids for high-performance industrial and automotive lubricants (e.g., gear oils, compressor oils, hydraulic fluids, greases, engine oils) and functional fluids (e.g., dielectric, heat transfer, drilling). Almost all products go into lubricant applications.
SABIC MD131-1000, SABIC 2300-7301, SABIC 1000-7101, SABIC 1000-1000MC and SABIC 2200-100
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 â?? iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
COVID protection - More liquid protection - Tough, robust and abrasion - resistant - Breathable - Quality control to exceptionally high standards
Manufacture for COVID maximum usage. - Disposable - Durable - Maximum protection - This product complies with COVID standards - Hight breathability and prevents sweating - Suitable for hospitals, labs and COVID usages.
Sterile syringes in USA from manufacturer's warehouse. Shipment every week. Country of origin: China. FDA/CE approved. Prices OTG LA: 1ml luer slip with 25gx1''needle 3ml luer lock with 23dx1'' needle 1ml luer slip US$0.60 3ml luer lock US$0.65 Also I'm sending you edited documents for your customer's reference. FOB price US$0.30 60 million OTG in LA every week
For in vitro qualitative detect of Covid-19 antigen in nasal(NS) swab specimens directly from individuals who are suspected of COVID-19 by their healthcare provider within the first 5 days of the onset of the symptoms. This test is only provided for use by clinical laboratories or to healthcare workers for point-of-care testing, and not for at home testing. 1.Easy to collect samples simple operation without professional equipment. 2.The test results are available in 15 minutes, and the test results are clearly visible. 3.Convenient transportation and low price, higher accuracy. 4.Suitable for large-scale rapid screening. Shelf life: 24 Months Test Result time: 10 Mins Packing: 25 Pieces per Box
ACCU CHEK ACTIVE TEST STRIPS - 50 per BOX MOQ: 10,000 per Month Supply Ability: 250,000 Boxes Monthly Payment terms: 100% Pre-payment by wire TT Delivery time: 30 days
GE OMNIPAQUE (iohexol) Injection 300mg and 350mg MOQ: 10,000 VAILS or 1,000 Packs Monthly. Supply ability: 100,000 VALS or 10,000 Packs Monthly Supply Ability: 50,000 VAILS or 5,000 Packs Monthly Payment terms: 100% Pre-payment by wire TT Delivery time: 30 days Please send me your PO details to move forward.
GE OMNIPAQUE (iohexol) Injection 300mg and 350mg GE OMNIPAQUE (iohexol) Injection 300mg and 350mg