Grog Or Refracory Bricks Are Available From Bahrain, 500 Tons Every Month
Magnesite brick, the content of magnesium oxide is more than 90%,periclaseas the main crystal phase of basical refractory brick. Magnesite with high temperature refractorness, high begining temperature of softing under loading,good alkali resistance of slag. According to differnence of the production technology and raw materials,it is names general magnesite brick and fused magnesite brick. Magnesite brick is mainly used for open hearth furnace,bottom and wall of the EAF,conventer, high temperature tunnel kiln,cement kiln,lime kiln, glass furnace regenerator. Any interests, get back to me at whatsapp008618848875625
AZS brick use high purity zircon, alumina and silica as its raw material. Our fused AZS blocks mainly inclue model AZS-33#, AZS-36#, and AZS-41#. the different models applicated in different parts of furnaces. AZS brick 33#, a normal refractory material, with the features of very good melting glass resisting, which seldom produces stone or other faults, and has little possibility to produce bubbles, widely used in glass Industrial furnace. AZS brick 36# has more free baddeleyite crystals in chain structure and less vitreous phase, which further improves the corrosion resistibility and reduces the potential defects in glass, so it is recommended to be used in sections where glass flow is faster and temperature is higher, such as melter sidewall, paving, doghouse, etc. AZS brick 41# has the most free baddeleyite crystals among the fused cast AZS families, which are evenly distgributed within the block. Its corrosion resistibility is the best and thus it is usually recommended to be used in the most demanding positions to balance the furnace life.
High Alumina Bricks are produced with select bauxite chamotte as main raw material, fired at 1450-1470 �°C by advanced process with strict quality control. High Alumina bricks have great features like high temperature performance, great corrosion and wear resistance, high bulk density, low iron content, etc. High Alumina bricks are extensively used in mining, metallurgy, cement, and chemical, refinery and refractory industries. These bricks are used in all kinds of industrial furnaces and high temperature areas to prolong the lives of furnaces.
Specification: 1) Appearance > Faint Yellow, 2) Bulk Density > 2.96g/cm3, 3) Self Wearing (Within 24hrs) > 0.04%, 4) Water Absorption > 0.008%, 5) Degree of Hardness > 7-8, 6) Temperature > 1400 - 1600 C, Alumina Bricks (142mm x 42mm x 96mm)
The Al2O3 content is more than 55%, and is calcined from a high-content alumina raw material such as a silicone raw material or a bauxite. High heat resistance and high temperature resistance at 1770 C and above. Has good slag resistance, mainly used in the masonry of steelmaking electric furnace, glass furnace, cement rotary furnace and so on. Characteristics of High Alumina Brick Price: 1.Refractoriness: More refractory than refractory clay bricks and semi-silica bricks, up to 1750-1790C, belonging to high-grade refractory materials. 2. Load softening temperature: Since the high aluminum has a high Al2O3 content, a low impurity content, and a low formation of the molten glass body, the fire-resistant softening temperature is higher than that of the refractory clay brick. However, since the mullite crystal has not yet formed a network structure, the load softening temperature is lower than the load softening temperature of the silica brick. 3. Slag resistance: High Al2O3 has high Al2O3 content, close to neutral refractory material, and can resist the erosion of acid slag and alkali slag. Because it contains SiO2, the resistance to alkali slag is less than acid resistance.
Magnesia-chrome brick is a high-level refractory product material ,which contains MgO and Cr2O3 as the main components, periclase and spinel are the main mineral components. This type of brick has high refractoriness, high temperature strength, strong resistance to alkaline slag, excellent thermal stability, and certain adaptability to acidic slag. The main raw materials for the manufacture of magnesia chrome bricks are sintered magnesia and chromite. The purity of the magnesia raw material should be as high as possible.
Features 1.High refractoriness 2.Good abrasion and creep resistance 3.High density Applications It is mainly used in areas that require high abrasion and temperature resistance, such as gliding rail bricks in steel pusher metallurgical furnaces, the tapping platform (tapping spout) style walking beam furnaces, and also as the interior for destructors.
Plant Introduction Sinometal refractory engineering Co., Ltd. is a modern comprehensive enterprise consisting of scientific research, manufacture and trade. Industrial products of the company are mainly magnesia refractories. Products of the company: The company possesses domestic advanced production line of refractories used in metallurgy industry; more than 160 sets of extensive manufacturing facilities; and more than 30 sets of checkout equipment. The company's annual output of magnesia carbon brick, alumina magnesia carbon brick and aluminium carbide brick and so on is 70,000 tons Quality advantages: All products of the company are in accordance with national standard as well as the enterprise's standard, and has got ISO9001 Quality Management System Certification and ISO14001 Environment Management System Certification. Scientific and technical advantages: The company invested a large sum of money to built the building of engineering technology center which covers an area of 5,000 square meters in 2012.The company's capability of scientific research and development is abundant. high refractoriness Brick brief introduction Magnesite Carbon brick is a kind of basic refractory which is made from magnesite, graphite as raw material, resin as binder, with high pressure moulding and low temperature treatment. As one kind of compound refractories, it make magnesite good slag erosion risistance and graphite high thermal conductivity and low dilatability mixed together. Thus BOF Brick has features of high refractoriness, good thermal shock resistance,erosion resistance, and has good performance in I&S industry, including BOF, EAF, LF. basic refractory brick series have the advantages of good performance, long life and low cost. And long supply experience can make sure that we can give our customer total solutions Alumina Magnesia Carbon brick has same production process, the main raw materials are fused alumina or bauxite, so it has better strength and refractoriness under load, but the slag resistance is not as good as magnesia Carbon bricks.
Features: 1. High refractoriness. 2. Good spalling resistance and wear resistance. 3. Good corrosion resistance. 4. Good thermal shock resistance. 5. High mechanical strength. 6. High-temperature creep rate is low. 7. Good volume stability at high temperature.
Red Clay Brunt Bricks
Refractory Fire Bricks With Normal Alumina, High Alumina Contain For Kiln, Floor And Heat And Acid Resistance
With the rapid development of the world automobile industry, the production process of automobile rearview mirrors has also made great progress, and then higher requirements have been placed on the performance and quality of the mold bricks. The glass bending brick has the following characteristics: First, the change of the reheating line is low, because the glass bending brick is sintered at 1050 ° C, which ensures the long-term use of the glass bending brick at 800 ° C. The characteristics of the burning line change to zero and no deformation; Second, the structure is fine, the glass bending brick is formed by micron material mixing by high-speed agitator, and the coarsest material particles in the batch are less than 1000 mesh, sectional structure Very fine; Third, the thermal shock stability is good, the glass hot bending mold brick will not appear any cracks (including cracking phenomenon) during long-term use; Fourth, the processing is convenient, the glass hot bending mold brick is according to user requirements specifications Made, this avoids the problem of large cutting and waste; fifth, the price is low, the price of glass bending bricks is lower than that of similar products. Glass hot bending mold bricks can also be used in industries such as hot bending glass, hot melt glass and process glass.
The bricks we offer are widely applauded for their dimensional stability, compressive strength and durability. Moreover, super heat duty and high alumina fire bricks are the products made from different fractions of refractory grog, fire clays and calcined bauxite of high purity. The different fractions of these raw materials are mixed in counter current mixers and plugged for obtaining homogeneous mixture. The mixture obtained hence, is then pressed in high capacity presses to give the desired shape and size. These pressed shapes are fired in high temperature tunnel kiln at 1300°c and above. The bricks are very light and porous maintaining good extranal temperatures and not allowing heat to radiate from the fire bricks thus increasing in overall furnace efficiencies.These bricks are manufactured as per asme standards and provided to the clients at nominal rates.
Magnesia chrome brick with high purity magnesia and high quality chrome ore as raw material, after high pressure forming and high temperature sintering. Magnesia chrome brick with good thermal shock resistance and volume stability, used in the cement and glass industries, also Non-ferrous metal smelting furnace.
Building and Construction Material: Concrete interlocking bricks Dimension: length width height 220mmx125mmx70mm Minimum Quantity Order: 10 000 pieces Price: 15 pesos per piece Manufacturer: Korean Color: Gray Shape: Rectangular
Feature It is mainly made of top class silica, via shaping and burning under the high temperature, possesses high temperature resistant, high strength and low impurities, etc. â?º Advantage: 1) Good thermal insulaton effects 2) Good acid erosion resistance. 3) High softening point with temperature. 4) No shrink in burn repeatedly. Stable Capability, High Quality, Excellent Service, Competitive price is the most important advantage of our products. Application: The main applications are the low temperature parts such as blast furnaces and hot blast furnaces, waste incinerators and glass melting furnaces.
Acid proof bricks / acid resistance bricks Our team of expert and skilled personnel has enabled us to supply and export acid proof bricks. These acid proof bricks are made of supreme quality raw materials and using advanced machinery and techniques. Known for their sturdy nature, these products are able to bear heavy loads. Owing to their optimum resistance against chemicals, acids, high temperature and corrosion, these products have earned a huge demand among our esteemed clients in the global market. Acid proof bricks can be availed from us in varied sizes as per the requirements of our respected patrons.
Specifications 1.Fused magnesia brick refractory 2.Ccs:60mpa, rul:1700 3.Good erosion resistance 4.High quality 5.Reasonable price
We are the leading manufacturer and exporter of Acid Proof Bricks, Acid Proof Tiles, Acid Proof mortar, acid proof cement, acid proof mastic, acid proof primer etc.
