Cable Standard Generally conforms to, Based on IS:9857-1990 VDE 0282, IEC 245-6, BS 6899 Silent Features - Ultra high performance flexible welding lead, double insulated for longer life and added safety - Better flame retardant properties - Outstanding toughness & durability - High resistance to cuts, tears & abrasion - Resistance to oil, solvents and chemicals - Excellent ozone and weather resistant Technical Data Fixed Installation : -20C to max.+90C Nominal Voltage : 600 V Spark Test : 3.5 KV(ac) Color : Orange / Black Jacket Min. Bending Radius : 6 x Cable Diameter Standard Packing Coils 100, 200, 300 and 500m Conductor High conductivity, bare annealed copper flexible conductor, EC copper class 5 & class 6 generally conforms to IS:8130-1984, IEC 60228 Separation Polyester tape Insulation Double Insulated/single insulated flexible Nitrile rubber HOFR insulated as per IS:6380-1984 Color Orange / Black Jacket Current Rating The maximum current ratings of flexible welding cables for different duly cycles are based on an ambient air temperature of 25 C and a maximum conductor temperature of 90 C. The percentage duly cycles for various processes and applications are as follows: - Automobile Welding : up to 100% - Semi Automatic Welding : 30% to 85% - Manual Welding : 0% to 60% - Very intermittent or Occasional Welding : up to 20% Voltage Drop When total cable lengths in excess of 15mtr., are involved, it may be necessary to use cables of larger cross section to ensure that the voltage drop is not excessive & welding currents are maintained at adequate levels. Application Designed for the secondary (high current) connection to automatic or hand - held metal arc welding electrodes. It is suitable for flexible use under rugged conditions, on assembly lines & conveyor systems, in machine tool and automatically operated line & spot welding machines
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 4 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price 325000.00 INR/Unit Product Specifications: Usage/Applications Casting, Forging, Sheet metal etc Surface Treatment Painted Power 420 Volt (v) Weight (kg) Not applicable Metric Ton Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Power Source Electricity Product Type Other Operating Type Automatic Pressure 6-7 Bar Color Dark Blue Technology Other Rotary Barrel Shot Blasting Machine Rotary Barrel Type Shot Blasting Machine is widely used in small or medium size iron, steel, alloy and non-ferrous castings, forgings, heat treated parts, pressings and fabrications at the lowest possible cost. The rotary barrel blasting machine employs a specialized internal geometry of the rotating barrel which features contoured ridges on the sides. This design facilitates the multi tumbling action of the drum's rotation, that allows the barrel to topple and mix the workpieces. This action makes sure that the blast stream passes through all surface area, thus providing equal and constant blast results. The machine also provides well-cleaned parts surfaces that are sand, rust, or scale free. It is ideal to use in applications requiring the blasting of small, flat, and light components. Technical Specification: Barrel Size: 649 MM Dia. x 625 MM Length Total Weight Capacity: 100 Kg's Volume: 1.5 CFT Total HP Required: 5 HP Specification: Usage/Application Surface Roughness Preparation Number of Doors Single Door Power Required 5 HP Capacity 0-5 ton/day Driven Type Belt Driven No. Of Blast Wheels 1 Wheel Size (inch) 11.5'' X 2.5'' Model Number BT-RBM-01 Flow Rate (kg per hr.) 1600 Kg/Wheel/Hour Motor Hp 3 HP Brand Adl Blastek Automatic Grade Automatic
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Other Supply Ability : 7-10 Number Per Month Price And Quantity: Price Range 600000.00 - 800000.00 INR/Number Minimum Order Quantity 1 Number Product Specifications: Product Type Other Pressure 6-7 Bar Technology Other Usage/Applications Casting, Forging, Sheet Metal Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Weight (kg) 4.5-6.5 Metric Ton Operating Type Automatic Power 420 Volt (v) Power Source Electricity Surface Treatment Other Color Dark Blue Product Description Hanger type shot blast machines designed and built as fully integrated blast cleaning systems to handle large/small or more fragile castings than barrel/table type machines. They provide a cost-effective solution for batch cleaning. Hanger typeMachine consists of horizontal door with a rotating hanger type work/job handling system. This hanger is directly mounted on the door of the machine and itrotates on its own axis, drive unit of this hanger is provided outside the door. This hanger swings out as the door is opened, making the full area easily approachable for loading and unloading of the components. For loading the components, door of the machine is opened manually & components to be blasted are hanged one by one on to the door hanger and the door of the machineis closed. Specification: Number of Doors Single Door Brand Adl Blastek Power Required 14.5 HP Capacity 10-15 ton/day Voltage (V) 415 V Driven Type Belt Driven Wheel No. Of Blast Wheels 2 Wheel Size (inch) 12.5'' X 2.5'' Model Number BT-SPH-1 Load Carrying Capacity Of Hanger (kg) 300 Kg Automatic Grade Automatic Blast Wheel Power 5 HP No. of Door with Hanger Hook 1 Diameter and Height Of Hanger Turning Meter 600 x 700 mm
One Touch Ultra Strip is a part of One Touch device. When used with One Touch meters, these strips measure the concentration of blood glucose by self-testing for both professional and home use. Salient Features: Automatically draws blood into the test strips in a painless manner Fast, painless testing For quick and accurate results Pack Size: 50 strips & 10 strips Warranty: 6 months Directions For Use: OneTouch Ultra Strips are used with the OneTouch Meter for quantitatively measuring glucose in fresh capillary whole blood These Strips and meter are intended for self testing outside the body (in vitro diagnostic use) by people with diabetes at home and health care professionals in the clinical setting, as an aid to monitor the effectiveness of diabetes control OneTouch Ultra Strips and meter are for use on the finger, palm, and forearm Safety Information: Each strip intended for single one time use Keep out of the reach and sight of the children Dispose the used strips properly Store in a cool and dry place
Product Details: Product Type Other Technology Other Power Source Pneumatic Operating Type Semi Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 50000.00 - 125000.00 INR/Unit Product Specifications: Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Color Dark Blue Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet Metal Technology Other Operating Type Semi Automatic Pressure 6-7 Bar Surface Treatment Painted Power Source Pneumatic Portable Sand Blaster Applications of the portable blaster : De-sanding and de-coring of castings. Descaling of castings, forgings parts. For removal of heat treatment scale, welding flux , corrosion, rusting in steel components. For engraving / creating design, etching on different type of stones and metals. For removal of old paint from metal surface of ships and other structural steel components. For creating rough surface inside and outside of heavy structure, pressure vessels, pipes for proper bounding of the primer/paint. Can also be used in Wooden industry for decorative design purpose. For creating textured/rough surface on different type of paving blocks, marbles, granite for their proper bounding on surface. Specification: Power 7 Hp Capacity 500 Kg Material Stainless Steel Automation Grade Manual Application Paint Removal Voltage 220-240 V | 50 Hz Motor Phase Single Phase No. of Wheels 3
Unique New Folding Jewelry Backdrop Display Cabinet is one of its kind product launched with focus on Jewellers who organize exhibition for sales or take part in Trade Fair and B2B exhibitions. Its innovative and unique design makes it easy to transport and install in minutes for use, without hassle free or requiring a technician or a carpenter. You can use this Folding Jewelry Backdrop Display Cabinet over and over again due to its durable construction with mostly aluminum, acrylic and or shatter resistance toughened glass provided by us. This is a Portable backdrop as a single unit which easily folds even height wise into half and actually as 3D folding product. First time launched in India and probably not available anywhere in the world except with us. Back drop like show case as well as display and sales counters are all portable and each set of three tables and one show case would just take not more than one hour and time taken would reduce as you get practice. Backdrop showcase size is 78-inch height and 36-inch wide with 18-inch shelf depth all sizes approximate. In this fascia size is 30-inch height & 34.5- inch width. 75 cm high & 90 cm wide area (usually open on demand Doors for closing) provided. Top part is approximately 48-inches of which 3" is Logo or name area leaving about 48" for creating display shelves. Two to Three shelves may be added and height of each may be adjusted with adjustable system provided within. Top has two to LED spot lamps for ample light also has LED strip light on Top side Left and Right all shelves. 78" x 36" becomes just 48" x 36" x 4" and easily fits in a Three-layered safe oxford carry bag. Two shelves provided are toughened glass. Approximate weight is 45 Kilograms.
Basic Parameters Dimensions: 201 x 99 x 35 mm Weight: 333g Adapter Input: AC 100 ~ 240 V Output: DC 24V 2.65A Display mode Segment LCD with white backlight + LED in red and green Function Introduction Charge Active, pre-charge, constant current and constant voltages are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries. For charging mode and current, please refer to the paragraphs of charging mode and charging current on page 2 & 3. Tester will stop charging if one of the conditions below was met. 1) Remaining capacity 99% & current intensity = 0 2) Remaining capacity = full charge capacity 3) Current intensity reduce to end charge current when constant voltage charge 4) Remaining capacity reach up the set value Discharge Constant current discharge for double loads Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered Tester will stop discharging if one of the conditions below is met. 1) Remaining capacity set value 2) Voltage set value 3) Current intensity reduce to zero Remarks: Many batteries can not measure exact current intensity, which cause an else current value appears after you set a value. However, the actual discharging current is the same with your set value. Test Testing time is 12 seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result. Normal: Test OK Shown on LCD Abnormal: Test NG Shown on LCD Possible causes and solutions for the abnormal: 1) Cause: battery voltage is too low to discharge Solution: try to charge the battery to raise voltage 2) Cause: remaining capacity is too full to charge any more Solution: try to discharge the battery to reduce the remaining capacity 3) Bad contact of battery connecting wires 4) Damaged battery 5) Tester trouble Capacity Correction The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip. Remarks: Discharging current can be set via Battery Manager. Deep discharge will cause a battery losing communication with tester, so battery dropping phenomenon may happen in the discharging process if the end capacity and voltage are set too low. In such a case, active charge will make the battery work again. 50% Capacity CD50%: charge firstly, and then discharge to 50% capacity DC50%: discharge firstly, and then charge to 50% capacity Online Functions Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine. Monitoring Battery information can be monitored via three windows. 1. Home screen Battery bar and brief information can be read on home screen. 2. Battery detail information window Show smart battery data in real time and the data can be saved and printed in image format. 3. Battery graph window Voltage, current and capacity are traced in curves. Control Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands. Attention All the functions of charge, discharge, capacity correction and 50% capacity are comply with the charging discharging conditions, which are showed on function introduction paragraph in page 4 & 5, so parameters should be set reasonably. Especially, deep discharge will cause a battery losing communication with tester. Others 1. Active cooling 2. Active batteries of zero voltage When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery. 3. Battery identification Battery information can be read from battery management chip after establishing communication. 4. Intelligent protection Against over-current, over-voltage, over-charge, over-heat and short circuit. 5. Fan Discharging mode: fan startup Other modes: fan startup when temperature above 48 Fan stop working when temperature below 40 6. Trouble alarm LED flickers in red color and current command stops when one of the conditions below happen. 1). There is not current for around 50 seconds when charge. 2). There is not current for around 25 seconds when discharge. 3). Charging time is above 8.8 hours. 4). Discharging time is above 9.9 hours. 5). Suitable for almost all laptop batteries, above 95% Structure Accessories 1).1 * adapter 2). 1 * USB cord 3). 1 * CD 4). 13 * connectors 5). 10 * cables 6). 10 * jumpers 7). 1 * loader Standard Export Carton
SIGN PULSE Pulse Oximeter Fingertip LED Screen, Blood Oxygen Saturation Monitor Fingertip, Blood Oxygen Meter Finger Oximeter Finger with Pulse, O2 Monitor - Blue Single Pcs Packing 200pcs In Case ( Moq 1Case) PRODUCT INFO Sign Pulse Oxi: Suitable for mountain climbers, skiers, bikers, aviators or anyone interested in measuring their SpO2 and pulse rate while on the move. You should only use the pulse ox before or after your exercise. Also, you must remain stationary while the pulse oximeter measure your pulse rate and SpO2 levels. This device is for sports and aviation use only Wide Rang of Applocations & Long Battery Life: This blood oxygen finger meter light and compact, accommodates wide range of finger sizes,low power consumption long battery life, automatic power off after 16 seconds Clear and Easy to Read: This blood and oxygen monitor have LED display, you can read in high light clearly.Our finger oxygen sensor will check and display in real time SpO2, PR, Pulse bar graph which are very easy to understand Suitable for wide range of finger sizes: Our SpO2 saturation monitor can be used for finger chamber with SMART Senior. Pulse oximetry can used for all ages but more accurate works for ages 12 and above
Eucalytic and acacia wood chips, outdoor furniture made from acacia and teak wood.
Product Name: Tactical Outdoor Cross Over Leg Rig Black Material: 600D Polyester/1000D Nylon Dimension: 6"H x 11"W x 5"D Color: Black, OD Green, Khaki, Coyote, Multicam and other camouflage Features: - Main compartment w/ 600D pack cloth and drawstring closure - Front pocket w/ zipper closure - Additional side release buckle flap w/ zipper pocket over center compartment - Two side utility pouches - Additional mesh compartment on the back w/ zipper closure - Single waist/shoulder strap for dual usage - Single detachable leg strap for stability when using as waist pack/leg rig - Adjustable side pouch to fit any pistol magazine MOQ: 10 Pcs OEM Accepted: Yes
Welding Apron (WA 101) : Cow/Buffalo Split Apron Cotton Piping on Edges Buckle For Adjustment Single Piece
Welding Apron (WA 101) : Cow/Buffalo Split Apron Cotton Piping on Edges Buckle For Adjustment Single Piece
Welding Sleeves (WS 101) : Cow Split Leather Sleeve Cotton Piping on Edges Buckle For Adjustment Single Piece
Monobond is a high tenacity polyamide sewing thread, single-ply twisted, bonded, designed for the various sewing needs in the outdoor sector, sports footwear, leather goods, upholstered furniture and technical articles. SPECIFICATIONS: DTEX 310, 470,700,940,1400
Chest piece Diaphragm Bell Tubing Ear tips (olive-shaped or mushroom-shaped) Ear tubes Headset Single or dual-head chest piece options Non-chill rim on diaphragm and bell Adjustable headset tension
Product Name: New Deluxe Outdoor Tactical Army Vest Material: 1000D Cordura,600D x 600D Cordura Color: Black,Tan,Green, Sand Camo,Digital Camo,Woodland ,Desert Features: Fully removable accessories Multi Function Tactical Vest Available in Multi colors Fits S-4XL (Adjustable) Waist can be extended upto 125 cm Great for outdoor activities MOQ:10 pcs OEM Accepted:Yes
Product Name: Army Outdoor Military Bags Tactical Large Transport Pack Material: 600D polyester Dimensions: 19" x 15" x 8" Color: Tan,Black,Red, Green,ACU,CP,Three Sand Camo,Digital Camo,Woodland ,Desert Features: * One large main compartment with interior mesh zippered pocket * Adjustable/removable waist belt, adjustable padded shoulder straps with D-rings * Padded back with breathable mesh backing * Top carry handle and top & side adjustable web straps with quick release buckles * The tactical pack also features a coated lining and pockets for water repellency MOQ: 10 pcs OEM Accepted: Yes
Power Modules are Point of Load (POL) DC-DC converters integrating controller chips, chokes and I/O capacitors into a single power management package for step-down(buck) applications. The low profile and compact size enables significant saving of board space, high efficiency enhances application performance, and design structure allows automated assembly by standard surface mount equipment
Touchless Forehead Thermometer for Adults,Infrared and Ear Thermometer for Fever, Babies, Children, Adults, Indoor and Outdoor Use RELIABLE AND ACCURATE: Our ear thermometer has been clinically tested and found to be a fast and absolutely reliable gadget to use. It is ideal for forehead and ear readings. MULTI-MODE THERMOMETER: The digital thermometer is designed for all ages, adults, infants and elders. It not only supports forehead or ear function, but is able to take room/object temperature. and are easily switchable. ADVANCED TECHNOLOGY FOR EXCELLENT PERFORMANCE: We provide sensitive sensors and the smart chip with the optimized algorithm to deliver reliable readings and ensure excellent performance. Just faster, more reliable, precise and hygienic.
Material: Nylon Webbing Size: According to customer requirement Color: Available in ACU, Black, Coyote Brown, MultiCam and OD Features: Durable 1.5" single layer nylon webbing Adjustable fit Security-friendly, non-metal buckle Usage: Military, Hiking, Hunting, Traveling MOQ: 50 Pcs OEM Accepted: Yes