Battery-powered rail coachscrewing machine is a new product developed by our company in accordance with international requirements for environmental protection. Using lithium battery as energy source, low-voltage and high-current DC motor as power, it has the characteristics of small size and high power. It is suitable for the tightening operation of ordinary sleeper vertical bolts, turnout sleeper vertical bolts, and high-speed railway sleeper plate vertical bolts. BENEFITS *36V super endurance trolley impact Li-battery Wrench *Super endurance capability, 3000 bolts are loosened and tightened per charge (M27 Boltï¼? *Intelligent torque adjustable design, the operator can set the working torque according to the actual working conditions *Intelligent electronic control technology, the actual working torque will not change with the decrease of battery power *Intelligent digital display, working torque and real-time power digital display *The whole machine is waterproof and can work in rainy days, and can also work under minus 30 degrees *The whole machine is 41 kg, which can be quickly disassembled and assembled, which is convenient for loading and unloading without additional tools SPECIFICATION Rated power 2Kw (brushless DC motor) No-load speed 0-1200rpm Frequency 0-2300 bpm Maximum tightening torque 3000Nm Maximum unscrewing torque 3500Nm Switch type Three switches, safety start switch and forward and reverse switch Illumination Dual LED lights Adjustable torque range digital display 80-500Nm (10Nm increment adjustment) Tightening time of M24 bolts 3~5s Weight â?¤41.5Kg (including sleeve and battery pack) Operating temperature requirements minus 30�°C~45�°C Rated voltage of battery 36V Rated capacity of battery 36Ah Endurance 3000 bolts are loosened and tightened per charge (M27 Boltï¼? Battery life 1000 cycle times of charge Waterproof rating of the whole machine IP45 (safe to use even in heavy rain)
Introduction of Carbide End Mill: The milling cutter is a multi -teeth rotary tool, and each of its knife teeth is equivalent to a car knife fixed on the rotary surface of the milling cutter. At the same time, the cutting blade of the cutting blade at the same time is long, and there is no short itinerary. The VC is also higher, so the productivity is higher. There are many types of milling cutters, different structures, and wide application range. According to their use, it can be divided into three categories: milling cutter, processing grooves for milling cutters, and milling cutters. Feature of HRC HRC45 series: the carbide rod with hardness 91.8HRA, the grain size is 0.6�¼m. With nano meter coating technology, it is suitable for mould steel, alloy steel, cast iron and stainless steel. In rough machining and rough to finishing machining HRC55 series: the carbide rod with hardness 92.5HRA, the grain size is 0.4�¼m. With AD coating technology, it is suitable for milling normal steel to pre-harded steel. It can also mill the mould steel, stainless steel, cast iron and aluminum milling with rough machining and finish machining. it can get very good surface on the work piece. it is a good quality of end mill, with high performance. HRC65 series: the carbide rod with hardness 93.9HRA, the grain size is 0.2�¼m. With new composite coating, it is suitable for work piece in HRC53-65 of high hardness of steel, it is specially widely used in high speed and high hardness field.
High-performance laser machine designed for efficient cutting and engraving in industries such as Footwear, Apparels, Electronics & Embroidery. With its advanced features and precise control technology, it offers exceptional speed, accuracy, and versatility, making it an ideal choice for large-scale cutting and engraving applications. Single Head Configuration: This machine is equipped with Single laser head, enabling simultaneous cutting or engraving operations. It maximizes productivity by reducing processing time and increasing efficiency. High-Speed DSP Control: The machine utilizes advanced 64-bit high-speed DSP control technology, enabling continuous and fast curve cutting. It optimizes the processing route for improved efficiency and shorter production time. Stable and Precise Cutting: The three-way reflective system and 6-balanced sliding type guide rails ensure stability and precision in both cutting and engraving processes. Wide Range of Materials: The machine is suitable for working with various non-metal materials, including cloth, leather, acrylic, rubber, wood, paper, ceramics, and more. Characteristic BS-6040 BS-9060 BS-1490 Model No. BS-6040 BS-9060 BS-1490 Engraving Area 600 mm x 400 mm 900 mm x 600 mm 1400 mm x 900 mm Cutting Speed 0-800 mm/min 0-800 mm/min 0-800 mm/min Laser Power 80 W 80 W 100 W Resolution 0.025 mm 0.025 mm 0.025 mm Positioning Precision
Looking to upgrade your spinning mill? You're in luck! Siddhi Impex brings you an incredible opportunity to purchase high-quality Second hand LMW spinning machines at unbeatable prices. Act fast because we have limited stock available. 1. BLOW ROOM LINE 2010 MAKE MPO LB3/6 1600 MM Condenser Mono Flexi Clean Applied Scanning Condenser Fan Fire Line 2. CARDING CHUTE FEED 2010 MAKE LC-333/5 NOS LC361/2 NOS LC363/1 NOS 3. DRAWING 2010 MAKE LD/2-1 NOS DO/6-1 NOS LR-RSB 851/3 NOS All in 18-45 Coiler Size 4. SIMPLEX SPEED FRAME. 2010 MAKE LF1400-A/144 SPL 4 NOS 7 Row Grill 30 MM Roll 5. RING FRAMES 2010 MAKE 18 Units LR6/S 1200 SPL 38MM Ring 170MM Lift 18.5 SPL 27-27-27 Roll P3-1 Drafting Each with Overhead Cleaning JAGOBI.../21600 SPL Total 6. AUTO CORNER 2010 MAKE AC-5/5 NOS Round Machine Types 9 Pocket Quantum 2 Clear 2.5 Turn 5.5 Degree Holder DZ-3 Prizm Auto Drafting Why Choose Siddhi Impex for Your Machinery Needs? Quality Assurance: We pride ourselves on offering only the highest quality machinery, backed by our commitment to rigorous inspection and maintenance processes. Competitive Pricing: Our competitive prices make upgrading your spinning mill more cost-effective than ever. Reliable Partner: With a track record of excellence and satisfied customers, Siddhi Impex is your trusted partner in the textile machinery market. Empty Run Service: We provide empty run service in order to ensure that our machines are well maintained and of High-quality If you are interested in purchasing the Second hand Spinning LMW Unit or any other Second hand spinning machiner
Ceramic Membrane Ceramic membranes (Porous Ceramic Membrane & tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm. Ceramic Membrane JIUWU Ceramic Membrane Products Ceramic Membrane Element JIUWU is the largest ceramic membrane element producer and a world leader in cross flow filtration. Ceramic Membrane Module A ceramic membrane module includes the ceramic membranes, housing, feed inlet, concentrate outlet, and permeate outlet. Ceramic Membrane Machine Lab & Pilot It is particularly suitable for scientific research institutes, universities, manufacturers, which is the most effective helper for research and production. Ceramic Membrane Filtration System Skid-mounted device effectively allocates and stores machine for process and modular systems in the field of solid-liquid separation. Flat Sheet Ceramic Membrane JIUWU is a professional flat sheet ceramic membrane factory. The ceramic flat membrane is a new type of high temperature plate porous ceramic membrane, which is prepared by high temperature sintering process using inorganic materials such as alumina.
Pneumatic Planter provides high precise planting along rows. The machine is connected to tractor with 3-point linkage system. The movement which is needed for air suction is supplied by 540 rpm PTO Shaft. Precision planting is supplied by Seeding Plates which are resistant to corrosion. Marker System is hydraulic type. The machine is manufactured as With or Without Fertilizer Unit. The Planting Coulters have been manufactured from Special Alloy Metal. The row-top distances can be set to requested scale easily and the seed can be transmitted to the ground without any damage. The Pneumatic Distribution Unit enables the seed to be planted grain by grain with precise and regular spacing in the rows and this system provides high savings in seed consumption also not required to be sparsed afterwards. Optional â??Micro Granule Fertilizer Kit can also be mounted . Sunflower, Corn, Sugar Beet, Coated Cotton Seed, Pumpkin, Peanut, Soybean, Greenpea, Chickpea, Bean, Onion, Melon, Watermelon, Tomato, Pepper, etc. can be planted by using appropriate seeding plates.
Product Description Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model NGM-4.4II Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1480*470*810mm Engine Two-stroke petrol engine/4.4KW Main shaft rpm 4670r/min Bolt screwing flat grinding wheel 125*65*M20 Grinding head angle of inclination 90° Grinding head stroke 45 mm Total weight 61kg
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model NGM-4.4II Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1480*470*810mm Engine Two-stroke petrol engine/4.4KW Main shaft rpm 4670r/min Bolt screwing flat grinding wheel 125*65*M20 Grinding head angle of inclination 90 ° Grinding head stroke 45 mm Total weight 61kg
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Railway Hydraulic Rail Tensor for Rail Stretching Hydraulic Rail Tensor Itâ??s suitable for 75kg/m and 60kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. SPECIFICATION Model YLS-900I Material Stainless Steel Dimensions (L x W x H) (mm) 1300*690*240mm Max. rated working pressure 57Mpa Max. rail pulling force 2*450kN Max. stroke of working cylinder â?¥500mm Two pull rod center distance 535mm Lock mode wedges clamp on both sides of rail head Pump model Honda GXV160 Power 3.05kW Rate of flow 3L/min Machine weight 283kg Internal combustion pump station weight 75kg (not including pipeline)
PET Bottle Washing Recycling Machine PET bottle recycling line is the ideal solution for your PET recycling project. Our PET bottle washing recycling line is used to recycle and reprocess waste plastic PET bottles to clean PET bottle flakes, including Coke bottles, Pepsi bottles, mineral water bottles, etc. The PET bottle washing line is designed and manufactured by our professional plastics recycling team can produce PET bottle plastic washing line from 500kg/h to 5000kg/h models according to customers' requirements. After being processed by our recycling PET bottle washing line, the final PET bottle flakes will have less than 1% humidity, and the dry and clean bottle flakes can be sent to our granulator to be made into pellets directly. Our standard PET bottle recycling washing line consists of a series of plastic recycling machines connected by various types of conveyor systems. The full section of the used PET bottle washing line includes debundling section, screening section, label separation section, pre-washing bottle section, flotation section and dewatering section.
Our t-shirts are crafted with quality cotton fabric with features like super combed yarn, fabric of 200-220 GSM, superior dyeing, colour fastness and with a long lasting sheen, they are worth every penny you spend. We offer blank t-shirts in bulk to our customers, as for them to create customized designs on them which are amazing for any business, corporate event or any social gathering. You can do various types of printing on this fabric i.e. Sublimation, DTF, Screen, Dark Fabric printing. These printing techniques combine the printing of an image on a unique sheet of paper with the following transfer of that image to another materials. The ink is then heated with the use of machines until the t-shirtâ??s fabric begins to absorb it. Without fading or scratching, all of our prints last for years. We use high quality dyes to process our t-shirts which give you a long lasting tone. Sublimation Blank Collar Matty T-Shirt can be washed in a machine using cold water. Deep shades take some time to mix with your other laundry. They need to be pampered and washed separately a few times till they are ready to mingle. Sublimation Blank Collar Matty T-Shirt is curated and manufactured in India with precise care and love to ensure top notch quality.
ZM-R720A LED/Micro Component Rework Station ZM R720A mini/micro BGA rework station is a precision optical intelligent LED rework station suitable for the rework of precision microdevices. This machine adopts imported HD CCD digital imaging, automatic optical zoom system, rework of precision microdevices, carbon fibre infrared BGA heating tube, and automatic feeding. Besides that, Seamark also has other types of BGA led rework stations for you to choose from. Functions of R720A Micro/Mini BGA Rework Station 01 Carbon Fiber Infrared Heating Tube The IR preheating zone uses carbon fiber infrared tube heating and high temperature resistant microcrystalline panel protection, and a multi-functional movable PCB fixing bracket. 02 Precision Tiny Devices and Automatic Feeding Seamark dedicated to the repair equipment of precision micro devices, automatic feeding device, optional LED feeder feeding fixture. 03 High Definition Display Using imported high-definition CCD (2m pixels) digital imaging system with automatic optical zoom, automatic control laser red-dot precision alignment, using 15' HD industrial display screen. As one of the top BGA Rework Station suppliers in China, Seamark ZM is famous for its rich technical force, complete detection means, reliable quality, good service. If you want to know the micro BGA LED rework station and to get a perfect kind of repair machine for your factory, please contact Seamark ZM first. Specification Of ZM R720A Micro/Mini BGA Rework Station Power Supply AC220V±10% 50/60HZ Power 6.15KW(Max), Top heater(1.45KW) Bottom heater (1.2KW), IR Preheater (3.2KW),Other(0.3KW) PCB Size 412*370mm(Max); 6*6mm(Min) BGA Chip Size 60*60mm(Max);0.6*0.6mm(Min) IR Heater Size 380*280mm Temperature Sensor 1 Operation Method 7" HD touch screen Control System Autonomous heating control system V2ï¼?software copyrightï¼? Display System 15" HD industrial display ( 1080P 16:9) Alignment System 2 Million Pixel HD digital imaging system, automatic optical zoom with laser red-dot indicator Vacuum Adsorption Automatic Alignment Accuracy ±0.01mm Temperature Control K-type thermocouple closed-loop control with accuracy up to ±1 Feeding Device Yes Positioning V-groove with universal fixture Dimensions L810*W635*H870mm Weight 84.5KG As an x ray inspection machine manufacturer, we can provide kinds of china inline x ray machine for sale, if you have needs, please contact us.
*The depth of the feed, the real-time battery power digital display, the operator is clear at a glance *Dual control system, both electronic feed and mechanical operation feed *Electronic feed, the feed precision is adjustable, realize the dual purpose of primary grinding and precise grinding *Preset the warning feed depth for grinding to prevent excessive grinding and cause grinding accidents *Super endurance capability, can work continuously for 1 hour *The whole machine is waterproof and can be used below minus 30 Specification Model LJ-LGF2001 Type Electric Rail Grinding Machine Material Aluminium Operating speed 4500r/min Rated power 5Kw (brushless DC motor) Grinding wheel feed accuracy 0.1 mm Grinding wheel size 150*55*75x4-M8 mm (outer diameter inner diameter thickness) Maximum tilt range of the grinding wheel 90 ° in one direction Operating temperature requirements -30 to 45 Grinding wheel type resin thick-walled cup-shaped grinding wheel Battery pack capacity 21Ah Rated voltage of battery pack 72V Weight 70Kg Profiling function realize profiling grinding of the outer edge contour of different types of rails Endurance capability(one charge) thermit welding grind around 8 welds; laser welding grind around 10 welds Grinding wheel feeding mode Dual control system, which can feed both mechanically and electronically Electronic feed It is divided into three gears for key switching and operation. First gear: fine grinding, unit feed 0.1mm Second gear: initial grinding, unit feed 0.3m Third gear: initial grinding, unit feed 0.5mm
Parameter: Unit Maximum swing diameter over bed: 400 mm; Maximum turning length: 1000 mm; Maximum length of two centers: 1000 mm; Spindle bore diameter: 104 mm; Spindle nose type D11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 5.4-720(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.06-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 480 mm; Transverse travel of lower tool rest: 500 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 4200 kg; Machine overall size: 3160x1450x1630 mm;
Parameter: Unit Maximum swing diameter over bed: 400 mm; Maximum turning length: 3000 mm; Maximum length of two centers: 3000 mm; Spindle bore diameter: 104 mm; Spindle nose type A11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 7.5-1000(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.05-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 350 mm; Transverse travel of lower tool rest: 400 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 5700 kg; Machine overall size: 5160x1380x1450 mm;