PRODUCT SPECIFICATIONS Product : Desiccated Coconut Grade : High Fat Fine Scope : This standard applies to the desiccated coconut product sold by PT Agrostar Andalan Nusantara A. Physical 1. Colour : Natural white, free from yellow specs ot other discolouration. 2. Flavour/Odor (F/O) : Mild and sweet characteristics of coconut, free of foreign F/O 3. Size : Fine granules of coconut 4. Granulation : No. Of sieves (ASTM) % Ratained On Mesh 10 : 2 Mesh 14 : 4 -10 maximum Mesh 16.20 : 40 - 73 maximum Mesh 30 : 20 - 33 maximum Pan : 12 maximum B. Chemical 1. Moisture Content, % : 3.0 maximum 2. Total Fat (Dry Basis), % : 63 - 68 3. Free Fatty Acid (as lauric) dry basis, % : 0.10 maximum 4. Residual SO2, ppm : Free/50 ppm max 5. pH (10% dispersion filtrate) : 6.1 to 6.7 6. Total Aflatoxins, ppb (DL : 4 ppb) : Not Detected 7. Organiphosphorus Pesticide residues, ppm (DL : 0,1 ppm) : None Detected C. Microbiological 1. Total Plate Count, cfu/g : 5,000 cfu/gram maximum 2. Yeast : 50 cfu/gram maximum 3. Moulds : 100 cfu/gram maximum 4. Enterobacteriaceae 100 :50 cfu/gram maximum 5. E. Coli (Type I) : Negative/10 grams 6. Salmonella : Negative/50 grams D. Ingredient List Raw Coconuts E. Packaging and Packing Size Standard Packing : 25 kg Polyethylene-lined 3 ply kraft paper bags Optional Packing : 10 kg, 50 kg, 50 lbs, 100 lbs Depending on customer's requirements. F. Storage Condition Recommended storage between 50oF 60oF (10-15.5oC) and 50%-60% relative humidity in clean odour free area and away from wall where coconut products will keep for 12 months. Avoid storage in high moisture area.
PRODUCT SPECIFICATIONS Product : Desiccated Coconut Grade : Low Fat Fine Scope : This standard applies to the desiccated coconut product sold by PT Agrostar Andalan Nusantara A. Physical 1. Colour : Natural white, free from yellow specs ot other discolourations 2. Flavour/Odor : Mild and sweet characteristics of coconut 3. Size : Fine granules of coconut 4. Granulation : No. Of sieves (ASTM) % Ratained On Mesh 7 (2.8 mm) : 0 - 0 Mesh 14 (1.4 mm) : 10 maximum Mesh 18 (1.0 mm) : 30 maximum Pan : 65 - 80 B. Chemical 1. Moisture Content, % : 4.0 maximum 2. Total Fat (Dry Basis), % : 50 +5 3. Free Fatty Acid (as lauric) dry basis, % : 0.10 maximum 4. Residual SO2, ppm :
Blood Glucose monitor devices with biosensor : latest generation, extremely precise, reliable and easy to use. The test strips are not coded, in order to reduce the risk of mistakes due to incorrect settings. It is possible to make the measurement taking the blood from more sites in the body and not only from fingers. The devices can store a high number of measurements and they can calculate the average up to 90 days. The logic of the appliance allows the devices to be very easy to use as the measurements are made automatically. The most common mistakes are indicated: such as the usage in temperature conditions not suitable or like the reuse of already used test strip. The large and easy to read display also integrates the function of indicating the level of risk when the glucose values are out of optimal bounds. Sample: Capillary whole blood Dual-scale: mg/dl and mmol/l Blood sample size: 0.7 Î Measuring time: 6 seconds Measurement range: 20-600 mg/dl (1.1-33.3 mmol/l) Pressure accuracy: 20-60% Measurement memory with date and time: 500 Average calculation on days...: 7 / 14 / 21 / 28 / 60 / 90 Code free test strips. AST (Alternative Site Testing). PC interface. Hi-Low temperature alarm. Moistened or used strips alarm. Risk indicator. Automatic shut-off: 3 min. Large easy to read LCD display. Size / Weight with battery: 94 x 53 x 15 mm. / 49g Battery type / lifetime: CR2032 / 1000 measurements Notes: Technical specifications are indicative. All information contained in the website and in downloadable or visible online documentation related to medical devices have no character or nature of advertising. In any form they are made, all the contents have informative nature intended solely for pharmacists doctors and sector professionals. A different Warrantyperiod can be agreed with the company. NORDITALIA reserves the right to change technical, functional, performance and aesthetic specifications without notice.
Blood Glucose monitor devices with biosensor : latest generation, extremely precise, reliable and easy to use. The test strips are not coded, in order to reduce the risk of mistakes due to incorrect settings. It is possible to make the measurement taking the blood from more sites in the body and not only from fingers. The devices can store a high number of measurements and they can calculate the average up to 90 days. The logic of the appliance allows the devices to be very easy to use as the measurements are made automatically. The most common mistakes are indicated: such as the usage in temperature conditions not suitable or like the reuse of already used test strip. The large and easy to read display also integrates the function of indicating the level of risk when the glucose values are out of optimal bounds. Sample: Capillary whole blood Dual-scale: mg/dl and mmol/l Blood sample size: 0.7 Measuring time: 6 seconds Measurement range: 20-600 mg/dl (1.1-33.3 mmol/l) Acceptable hematocrit range: 20-60% Measurement memory with date and time: 250 Average calculation on days...: 7 / 14 / 21 / 28 Code free test strips. AST (Alternative Site Testing). PC interface. Hi-Low temperature alarm. Moistened or used strips alarm. Risk indicator. Automatic shut-off: 3 min. Large easy to read LCD display. Notes: Technical specifications are indicative. All information contained in the website and in downloadable or visible online documentation related to medical devices have no character or nature of advertising. In any form they are made, all the contents have informative nature intended solely for pharmacists doctors and sector professionals. A different Warrantyperiod can be agreed with the company. NORDITALIA reserves the right to change technical, functional, performance and aesthetic specifications without notice.
Price - Euro 9,92 Gift box for adult dogs with wet food, toy, treats and bowl. Schesir Chicken with Ham 150g- Raw materials: chicken fillet 61%, ham 4%, rice 1.5%. Additives per kg: vit.A 1650SV, vit.E 10mg. Analysis: protein 13%, fat 2%, fiber 0.1%, ash 2%, moisture 83%, 83.2 kcal/100 g. Barking Heads Lamb 300g- Ingredients: 85% lamb (60% fresh lamb, 25% lamb broth), sweet potatoes, spinach, courgette, peas, sunflower oil, salmon oil, seaweed, alfalfa, parsley, turmeric, anise, mint, Greek cheese seeds, Minerals Analytical Components (%): Crude Protein 10%, Crude Fat 6%, Crude Fiber 0.6%, Chaff 2%, Moisture 79% Nutritional Additives (per kg): Vitamins: Vitamin D3 450 IU, Vitamin E (DL-Alfa Tocopheryl Acetate) â?? 40 mg Microelements: Zinc as Zinc Oxide, 30mg, iron and Manganese, as Manganese (ll) Oxide, 2mg, Copper as Copper Sulfate Pentahydrate 0.4 mg, iodine as calcium iodate anhydrous 0.3 mg. No artificial colors, flavors or preservatives added. Arquivet Biscuits for dogs Bow Wow treats with stomach Bow Wow treat stick with beef, poultry liver and yucca.
Model: DL-9929XM Product Name: Touch Screen Linear Wear Resistance Testing Machine Test stroke: 0-100mm Test speed: 0-60 times/min adjustable Test object: coating, coating, or other surface treatment Sports mode: electric Fixture self weight: 15g Test load: 250g Counting setting range: 1~999999 times Maximum allowable size of workpiece: 220 * 160 * 50mm Machine size: W480 �? D360 �? H360mm Machine weight; 20kg Power supply: 1 â?® AC220V 2A or specified 2. Introductionï¼? This instrument is suitable for testing the wear resistance of products such as plastics, automotive parts, rubber, leather and textiles, electroplating, freely detachable components, paints, printing patterns, etc. It can be used to evaluate the wear resistance of products, as well as the scratch resistance (single or multiple scratches) and color transmission of products. Both dry and wet wear tests can be conducted.
1.)Performance specifications: 1. Machine model: DL-4100, 2. Capacity: 100L, 3. Temperature range: -40 -150 , 4. Humidity range: 20% -98% RH, 5. Temperature and humidity control accuracy: ± 0.5 ± 2% RH, *Attention: The performance guarantee of items # 2-4 above should be measured after 30 minutes of stable temperature sensing 6. The temperature and humidity are evenly distributed: ± 2.0 ± 5.0% RH, *Note: The performance guarantee of item # 5 above requires testing at a distance of 1/6 of each wall surface in the testing area, and must be measured after stabilizing with temperature and humidity for 30 minutes 7. Inner box size: 500 high Width 400 500mm deep, 8. Outer box size: 1700 high Width 1000 1500 mm deep, 9. Equipment placement space: at least 2000 2000 2000mm (W H D) , 10. Power supply: AC220V 4.5KW, 50HZ
1. Main technical parameters, Model: DL-7802B-6A13, Product Name: Wire Bending Testing Machine (Wire Swing Testing Machine), Test angle: 0~± 180 can be set arbitrarily, and the left and right angles can also be set to be inconsistent, Test speed: 0-100 times/min, set arbitrarily, Station: 6 stations in total, with each group recording the number of tests separately, Independent testing: Each group can be tested independently, and 6 groups can also be tested simultaneously, Counting setting range: 1~99999999 times, any setting, Shutdown method: Broken wire shutdown, can switch between single broken wire shutdown and 6 sets of broken wire shutdown, Weights: 6 each for 50g, 100g, 200g, 300g, and 500g, Machine size: 1400 450 1300mm (length, width, height), Machine weight: 130kg, Power supply: 1 AC220V 2A or specified, 2. Equipment Introduction The 360 degree swing testing machine meets the requirements of relevant standards such as UL817, such as "General Safety Requirements for Flexible Cord Components and Power Cords". Suitable for manufacturers and quality inspection departments to conduct bending life tests on power cables, DC cables, headphone cables, USB cables, etc. Used to test the reliability of wire products under specified speeds, angles, and weights.
Ac Auto Air Conditioning Compressor 447190-6360 447190-6380 OE NO.:4F0 260 805 AR/AL/AA 8E0 260 805 CR/BT/BK 447190-6360 447190-6380 Place of Origin:Jiangsu, China (Mainland) Brand Name:ALA Size:Standard Size, OEM Standard Product Name:Air Conditioning Compressor SP10 for Matiz Car Color:Silver and Black Material:Aluminum Logo: Ala Packing:Carton MOQ:10 Application:air condition system Usage:car Test:100%test Model Number:75001 Type:COMPRESSOR Car Make:AUDI A8 3.2 FSI V6 AUDI A4 3.2 FSI External controlled variable displacement compressor(Swash Plate ) ATC Compressor Type HE17G DENSO Compressor Type 7SEU17C Vehicle Manufacturer AUDI A8 3.2 FSI V6 AUDI A4 3.2 FSI ATC P/N Compressor 75001 DENSO P/N Compressor 447190-6360 447190-6380 OE Partnumber 4F0 260 805 AR/AL/AA 8E0 260 805 CR/BT/BK Rotor Type PV 6 Clutch Dia. 125mm/130mm(Max.) Clutch Type; Voltage DL Refrigerant Type R134a Oil Type; Quantity PAG46,160cc
Ac Auto Air Conditioning Compressor 447190-6360 447190-6380 OE NO.:4F0 260 805 AR/AL/AA 8E0 260 805 CR/BT/BK 447190-6360 447190-6380 Place of Origin:Jiangsu, China (Mainland) Brand Name:ALA Size:Standard Size, OEM Standard Product Name:Air Conditioning Compressor SP10 for Matiz Car Color:Silver and Black Material:Aluminum Logo: Ala Packing:Carton MOQ:10 Application:air condition system Usage:car Test:100%test Model Number:75001 Type:COMPRESSOR Car Make:AUDI A8 3.2 FSI V6 AUDI A4 3.2 FSI External controlled variable displacement compressor(Swash Plate ) ATC Compressor Type HE17G DENSO Compressor Type 7SEU17C Vehicle Manufacturer AUDI A8 3.2 FSI V6Â Â AUDI A4 3.2 FSI ATC P/N Compressor 75001 DENSO P/N Compressor 447190-6360Â 447190-6380 OE Partnumber 4F0 260 805 AR/AL/AA 8E0 260 805 CR/BT/BK Rotor Type PV 6 Clutch Dia. 125mm/130mm(Max.) Clutch Type; Voltage DL Refrigerant Type R134a Oil Type; Quantity PAG46,160cc
Item: DL-GR-01 Brand Name: DaoLin Type: Replacement Seal Product Details: Operational conditions: Temperature: -30 to +200 Pressure: ;;2.5mpa Speed: ;;25m/s Size: 12mm,16mm, 22mm Materials: Stationary ring: RBSIC, M106,M108 Rotary ring: Resin Impregnated Carbon graphite(Furan), RBSIC, M106,M108 Secondary seal: Viton, EPDM, NBR Spring and metal parts: 304/316 stainless steel Packaging: 1.Tissue paper + Carton box 2.As per customer's requirement. Shipping method: 1.By Express: DHL,UPS,EMS,TNT or FedEx 2.By air, or by sea service are all available as requirements. Note: AlfaLaval,APV,Flygt,Fristam,Grundfos,Hilge,KSB,JABSCO,Johnsonect,are some registered trade mark of pumps companies. DaoLin is not associated with, nor a distributor for,these manufacturers.Any name,brand,model or part number is for identification purpose only.Our components will fit other brand pumps and we offer OEM service.
Identification of 584-93-0 Name: Pentanoic acid,2-bromo- (Related Reference) EINECS: 209-546-6 Molecular Formula: C5H9BrO2 CAS Registry Number: 584-93-0 Synonyms: Valeric acid,2-bromo- (6CI,7CI,8CI); 2-Bromopentanoic acid; DL-a-Bromovaleric acid; NSC 184; a-Bromopentanoic acid; a-Bromovaleric acid; InChI: InChI=1/C5H9BrO2/c1-2-3-4(6)5(7)8/h4H,2-3H2,1H3,(H,7,8) Molecular Structure: Pentanoic acid,2-bromo- C5H9BrO2 (cas 584-93-0) Molecular Structure This structure is also available as a 2d Mol file Chemical Properties Appearance: Clear pale yellow liquid Molecular Weight: 181.03 Density: 1.381 Boiling Point: 132-136â?? (25 mmHg) Flash Point: 94.2 °C Refractive index: 1.4709 Solubility: Insoluble in water, soluble in acetic acid, benzene, ether and other organic solvents Safety Data of 584-93-0 Risk Codes: R22;R23/24/25;R34 Safety Statements: S26;S27;S28;S36/37/39;S45 Hazard Symbols: C:Corrosive T:Toxic HazardClass:8 MSDS infomation: Pentanoic acid,2-bromo- (584-93-0).msds
ADSS Preformed Short Span Tension Clamp Tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. Preformed Tension Clamp ADSS tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. At the same time, the tension clamp can withstand at least 95% of the rated breaking strength of conductors and strands, and is made of high-strength materials. Composition: twisted wire, rubber insert, cast aluminum shell, right-angle shackle, U-shackle. Purposes: supporting cableï¼?make the ADSS hang on the tower. Features: 1. Component: preformed wire, rubber inserting, casting aluminum shell, right angle shackle, U shackle etc. 2. Usage: supporting,make ADSS cable hang on the pole and tower. 3. Features: a, stress on average, no concentration stress, protect cable better and increase the stiffness of cable in the mount point. b, good dynamic stress. It can provide enough grip strength(10%RTS) c, rubber inserting make abrasion low. d. excellent aluminum alloy improve the mechanical and resist-corrosion function, extend life. Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods..
ADSS with The DN Short-span Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The ADSS tension clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters. Composition: twisted wire, thimble, PH-type shackle, U-type shackle etc. Purposes: support all strain, make ADSS cable connect the strain pole and tower. Features: Preformed wire connect the pole and tower by thimbles etc. link fitting, afford the load of the transmission line. Grip strength not less than cable 95%RTS in case that not more than lateral pressure of the cable E xcellent aluminum clad steel improve the mechanical and resist-corrosion function, extend life. Corrosion-resistant materials such as aluminum or plastic to ensure durability and longevity. Gripping mechanism that securely holds the cable without causing damage. Tensioning mechanism that allows for adjustment of the cable tension. Insulating material to protect the cable from electrical currents. Suitable for use with a range of cable diameters. Easy installation and maintenance. Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods
ADSS Preformed Short Span Tension Clamp Tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. China ADSS Tension Clamp ADSS tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. At the same time, the tension clamp can withstand at least 95% of the rated breaking strength of conductors and strands, and is made of high-strength materials. Composition: twisted wire, rubber insert, cast aluminum shell, right-angle shackle, U-shackle. Purposes: supporting cableï¼?make the ADSS hang on the tower. Features: 1. Component: preformed wire, rubber inserting, casting aluminum shell, right angle shackle, U shackle etc. 2. Usage: supporting,make ADSS cable hang on the pole and tower. 3. Features: a, stress on average, no concentration stress, protect cable better and increase the stiffness of cable in the mount point. b, good dynamic stress. It can provide enough grip strength(10%RTS) c, rubber inserting make abrasion low. d. excellent aluminum alloy improve the mechanical and resist-corrosion function, extend life. Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods..
b. Technical parameters: Measuring area: x=500mm, y=600mm, z=400mm Overall dimension: 1250 X 1380 X 2380 mm Workbench load-bearing Max Part Weight: 800kg Machine weight: 1800kg Length accuracy MPEe: â?¤ 1.7+L/300ï¼? �¼ M) Detection ball accuracy MPEp: â?¤ 2.5 �¼ M Scale resolution: 0.1um Max 3D Speed: 500mm/s Max 3D Acceleration: 900mm/s �² c. Advantages: Patient double passive vibration damping: The use of coordinate measuring machines is mainly in production factories, which inevitably leads to vibrations caused by nearby machine tools or transport vehicles, which has a fatal impact on the accuracy of coordinate measurement. Building earthquake resistant foundations is a basic idea, but it will increase additional costs and trouble. Our three coordinate support adopts a dual passive damping mechanism to prevent the impact of low-frequency vibration, greatly ensuring measurement accuracy and reducing the trouble of taking seismic foundation measures. High quality granite workbench: The granite work platform is the overall support of the machine, and its quality affects the overall performance of the machine. Our three-dimensional granite material is processed as a whole, stress free, rust and corrosion resistant, easy to maintain, low thermal expansion coefficient, and small deformation affected by temperature. Effectively reducing the vibration of the measuring machine and improving the performance of the entire machine DL-654 is a high-end bridge type coordinate measuring machine developed and designed independently. During the production process, every component is strictly screened, and during the assembly process, it ensures perfect and reasonable connection between the components. Then, it is calibrated according to the ISO10360-2 standard, using high-precision laser interferometers for calibration. Later, it is also tested using standard testing tools (square rulers and step gauges) certified by the DKD organization. Therefore, the final customer will use genuine German technology, high-quality, and high-precision coordinate measuring machines.
product name : ABB 07KR91 1 YEAR WARRANTY BRAN-NEW ABB GJR5250000R0252 ABB ICSK20F1 Procontic CS31 ECZ BENTLY NEVADA 330130-040-03-00 ABB PU516(3BSE013064R1) Bran-new Certified Product and One Year Warranty If there is a quality problem within 15 days, you can return and exchange the products. Our company has many products in stock,which are immediately available.The warranty is 1 years which apply to all the new products.If you purchase one more parts from us,we can make a discount to you. There have other products maybe you will want to choose as well. 1771-HS3CR 1771-HS3A 1771-HRA 1771-HODS 1771-HD 1771-ES 1771-DXPS 1771-DS 1771-DL 1771-DB 1771-CXT 1771-CX7 1771-CX2 1771-CX1 1771-CP3 1771-CP2 1771-CP1 1771-CFM 1771-CE 1771-CD 1771-CAS 1771-CAPR3 1771-CAP3 1771-CAE 1771-ASB 1771-ALX 1771-AF 1771-ACNR15 1771-ACN15 1771-ACN 1771-A4B 1771-A3B1 1771-A3B 1771-A2B 1771-A1B 1785-RC 1785-ME64 1785-ME32 1785-ME16 1785-M100 1785-L86B 1785-L80E 1785-L80B 1785-L60L 1785-L60B 1785-L4OL
GDRZ-902 Transformer Sweep Frequency Response Analyzer Introduction: The structure and reference of the transformer is fixed after been made, Therefor, the frequency response of each winding will be almost the same normally; Some case such as cut off between circles or phases in experience, cut off or winding moved for the pull of power in running, winding moved for hit in transportation, could change the reference of the transformer ,of which the frequency response will be changed, we could detect the deformation according to the frequency response curve; Our company has designed the winding deformation tester base on the idea and the advanced technique; It could draw the frequency response curve accurately. Then we compare the curves horizontally or vertically to detect the deformation of the transformer; The tester is conformed to the standard of DL/T911 2004; GDRZ-902 Sweep Frequency Response Analyzer for transformer distortions detection Features: Using the advanced technical of DDS; Using the high speed and advanced microprocessor to design; Using double channels of AD chip of 16 bits; With seven inch LCD touch screen of which the brightness can be adjusted; With thermal printer of which the print thick can be adjusted; It could store one hundred and twenty groups of data, which could be read to current screen or upload to the PC; With PC software using which we could upload data ,test, analyze data, print data, or create word document; Using USB2.0 to connect to the device; Tester dimension: 31cm * 15cm * 15cm; Weight: 4.0KG; Specifications 1Sweep modes Linear sweep,Section sweep 2Linear sweep 0.5KHZ-1MHZinterval 0.5KHZ 2000 dots 3 Section sweep l 50HZ-100HZinterval 2HZ25 dots; l 100HZ-1KHZinterval 20HZ45 dots; l 1KHZ -10KHZinterval 50HZ180 dots; l 10KHZ-100KHZinterval 0.2KHZ 450 dots; l 100KHZ â?? 500KHZ interval 0.5KHZ 800 dots; l 500KHZ â?? 1000KHZ interval 1KHZ500 dots; 4Test range (-100dB) - (+20dB) 5Test accuracy 0.1dB 6 Frequency accuracy1M Ω 8Signal output impedance 50 Ω
Item: DL-Hi-02 Brand Name: DaoLin Type: Replacement Seal Product Details: Materials: Stationary Ring RBSIC/99.5%,A12O3/SSiC Rotary Ring Antimony Impreg.Carbon Graphit/Resin Impregnated Carbon Graphite(Furan)/ SSiC/RBSIC/M106,M108 Secondary Seal Resin Impregnated Carbon Graphite(Furan)/ EPR/Kalrez,Chemraz/CR/NBR/MVQ/FPM/Hast.C4 Shaft size 30mm, 35mm Spring & Metal Parts304/316 Stainless Steel/Hast.C4 Shaft Seals Choose the One to Suit You A wide range of shaft seal options is available to suit different media and applications. The single inboard seals maintain the optimum position in the liquid. This ensures efficient cleaning, lubrication and cooling. Seat ring: Carbon Carbide and Silicon Carbide Ni-Resist Steel Seat, Viton O-Ring General Packaging: 1.Tissue paper + Carton box 2.As per customer's requirement. General Shipping method: 1.By Express: DHL,UPS,EMS,TNT or FedEx 2.By air, or by sea service are all available as requirements. Note: AlfaLaval,APV,Flygt,Fristam,Grundfos,Hilge,KSB,JABSCO,Johnsonect,are some registered trade mark of pumps companies. DaoLin is not associated with, nor a distributor for,these manufacturers.Any name,brand,model or part number is for identification purpose only.Our components will fit other brand pumps and we offer OEM service. url:http://www.inseals.com
BATTE liquid loss-in-weight feeder is available for liquid materials with low to high viscosities. BATTE liquid loss-in-weight feeding system with high accuracy can satisfy the field of pharmaceutical, chemical, food, rubber industry etc. Technical Parameter for BATTE Liquid Materials Loss-in-weight Feeder (LF-DL Series) The Operating Principle of BATTE Liquid Materials Loss-in-weight Feeder Our liquid loss-in-weight feeding system adopts one of the below dosing pumps on basis of liquid characteristics and counterpressure: Piston and diaphragm pumps Gear pumps Hose pumps Rotary piston pumps Eccentric screw pumps Variable Heated Method Electrical heating Hot water heating Hot oil heating The Advantage of BATTE Liquid Materials Loss-in-weight Feeder Being highly insensitive against physical interference; Cost-saving heated designs Being available for high viscosity liquid materials requiring pressurization Quality Control System Fixed Equipments for Q/C Qualified Adequately before Reaching Warehouse Randomly Checking Machines before Shipment Our Value-added Service Package 1. Installation Services: During the period of installation and debugging, we shall offer training about effective operation and maintenance. 2. Technical Services: Our company has been devoting ourselves into offering custom transforming projects for our worldwide clients in the field of medical, chemical engineering, plastics, rubber industries etc. We can assist our clients to solve all kind of technical problems with our capable technician team, and we own adequate experience for production line transformation as well as formula feeding arrangement. 3. Warranty Services: We offer free after sale service except the engineers' traveling expense for any quality problem occurs during our 12 months warranty period.
