Sintered Bronze Filter Suppliers and Manufacturers

Stainless Steel Sintered Filter Element Feature 1. Stainless steel sintered filter element is surface filtration 2. Stainless steel sintered filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. Stainless steel sintered filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life Stainless Steel Sintered Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry

Description SBC Series Sintered Carbon Block Cartridge Filters are high-end type activated carbon cartridges developed by Hongtek. Sintered carbon block cartridges are made of 100% FDA approved high-quality coconut shell or high- iodine-value activated carbon materials. Hongtek use the world's advanced technology of sintering molding to make sintered CTO carbon block filter cartridges possessing strong adsorption ability and good rigid structure. Sintered carbon block filters can removel chlorine, bad taste and odor, chloramines, fine sediment, organic chemicals and heavy metal with high filtration efficiency. Besides, sintered carbon block filter cartridges are more stable and more reliable, owning longer life than normal Extruded CTO activated carbon water filters. Feature 1. High flow rate and low drop-out, high filter efficiency and longer service life 2. Sintered carbon filters have very large filtration area and super strong adsorption 3. Sintered carbon cartridges have many porous and good consistency of performance 4.Effectively remove chlorinated compounds, organic matter, bad smell, colors, Vocs and THMS 5. 100% FDA approved high-quality coconut shell & high-iodine-value activated carbon materials Application 1. Water Purifier 2. Drinking Water 3. Plating Industry 4. Pre RO Water Filtration 5. Industry Water Treatment 6. Food & Beverage Industry

Product Description Material: ALBC2-7 Price of product ( CIF price or FOB price) : Negotiable Product origin : VEJ - Viet Nam Key Specifications/Special Features : Following customer's standards Minimum Order Size and Packaging details : Negotiable

Product Introduction Stainless steel powder sinter filter element is a kind of filter material, which is made of stainless steel powder sintered at high temperature. The filter element has high permeability, can effectively filter tiny particles and impurities, has high corrosion resistance and durability, and is suitable for liquid and gas filtration in various chemical, food, pharmaceutical, electronic and other industries. Product parameters Diameter: 50mm-1200mm Length: 100mm-2000mm Filtration accuracy: 1m-100m Filtration area: 0.1-1000 Maximum working temperature: 600 C Resistance coefficient:

We are manufacturer of auto components in forging, casting and pressing commodity. 1.we have manufacture forging items like forge ring, nut , bolt, fork, lab ring, casting valves /cover / pressing parts line cover/ filters , connecting rod . 2.precision turned components with cnc/ troub machine/vmc 3. machining of forging and ci casting parts /aluminum castings 4. components presently manufactured have application in auto sector, home appliances and electrical industry..

What Is Sintered powder filter ? is a process in which a metal powder is passed through a special mold and is formed by high-temperature sintering. By adjusting the particle size of the powder, the process conditions, etc., it is possible to produce a porous metal sintered filter element having a wide range of filtration precision. Main Material ss316 316L and Titanium.. Micron Size 0.2um to 200um Thick-ness 2mm 2.5mm 5mm to 20mm or customized

1.Properties of stainless steel sintered porous materials 1) High-temperature resistance, in normal use under 500 2)High mechanical strength, good plasticity, can be machined. 3)Corrosion resistance, oxidation resistance, can be used in nitric acid, sulfuric acid, dilute hydrochloric acid (5%), acetic acid, liquid hydrogen, liquid nitrogen environment. 4)Good molding process, according to customer drawings for processing a molding. 5)High filtration precision and good purification effect. 6)The pores are uniform, the internal structure is stable, and no particles fall off. 7)Good air permeability, easy to back blow cleaning, can be used repeatedly online regeneration. 8)Wear resistance and impact resistance, good mechanical properties. 2.Application of stainless steel sintered porous materials According to its physical and structural characteristics, stainless steel sintered porous materials are mostly used in the fields of noise elimination, filtration and separation, fluid distribution, flow limiting, capillary core and so on. 1)Chemical raw material production process in addition to impurity filtration, material decarburization filtration and fine filtration. 2)Ultrafiltration, RO, EDI system security filtration in water treatment. 3)Food and beverage industry finished product clarification filtration. 4)Filtration and recovery of precious metal catalyst in petrochemical industry. 5)Precision filtration of liquid raw materials, products and pharmaceutical intermediates in the chemical industry. 6)Reverse osmosis security filtration in the field of water injection filtration. 7)Gas purification of steam, compressed air deoiling purification. 8)Medium purification and flow limitation for pneumatic components, lubricants, fuels and hydraulic pressure systems. 9)Chemical dye industry of high - temperature decarburization.

1. Manufacturing Technique Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. Feature: the material contains a large number of connected or semi-connected pores, the pore structure is composed of regular and irregular powder particles, the size and distribution of pores and the size of porosity can be adjusted according to the powder particle size combination and preparation process to meet the actual needs of customers. 2.Properties of titanium sintered porous materials: Pore diameter uniformity, pore stability, high separation efficiency. High porosity, low filtration resistance, and high permeability. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance. Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements. Good mechanical properties, low differential pressure, large flow. Strong anti-microbial ability, does not interact with microorganisms. Online regeneration, easy cleaning, long service life. Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry. Excellent electromagnetic shielding performance. Good damping and shock resistance. 3.Application of titanium sintered porous materials Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials, noise-canceling materials according to their physical and structural properties. Decarburization filtration of pharmaceutical liquids. Electrolytic gas industry precision filtration, gas distribution. The medical industry makes biological implants. Water treatment industry odor sterilization filtration and ozone aeration. Clarification and filtration in food and beverage processing. Prefiltration of reverse osmosis system for the electronics industry. Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry. High-pressure air filtration in the aerospace industry. Filtration and recovery of the precious metal catalysts in the fine chemical industry. The electrode matrix of a fuel cell. Catalyst carrier in gas and liquid catalytic reactions.

1. Manufacturing Technique Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. Feature: the material contains a large number of connected or semi-connected pores, the pore structure is composed of regular and irregular powder particles, the size and distribution of pores and the size of porosity can be adjusted according to the powder particle size combination and preparation process to meet the actual needs of customers. 2.3. Properties of titanium sintered porous materials: Pore diameter uniformity, pore stability, high separation efficiency. High porosity, low filtration resistance, and high permeability. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance. Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements. Good mechanical properties, low differential pressure, large flow. Strong anti-microbial ability, does not interact with microorganisms. Online regeneration, easy cleaning, long service life. Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry. Excellent electromagnetic shielding performance. Good damping and shock resistance. 3.4. Application of titanium sintered porous materials Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials,noise-canceling materials according to their physical and structural properties. Decarburization filtration of pharmaceutical liquids. Electrolytic gas industry precision filtration, gas distribution. The medical industry makes biological implants. Water treatment industry odor sterilization filtration and ozone aeration. Clarification and filtration in food and beverage processing. Prefiltration of reverse osmosis system for the electronics industry. Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry. High-pressure air filtration in the aerospace industry. Filtration and recovery of the precious metal catalyst in the fine chemical industry. The electrode matrix of a fuel cell. Catalyst carrier in gas and liquid catalytic reactions.

FLD sintered wire mesh pleated filter is made of stainless steel woven wire mesh, the pleated layer are normally two or three layers of woven wire mesh and sintered fiber web or felt, together with inside perforated stainless steel tube support. The outside layer of perforated metal tube is optional. The advantage of the pleated filter elements are high porosity, large filter area and high dirty holding capacity as folded structure, strong corrosion and acid and alkaline resisting property, durable, reusable, save cost. It play an important role in the filtration of heavy contaminated gases, liquids and liquid. We have professional engineers to design special stainless steel filter for you. Features and Benefits 1.) Sturdy structure; 2.) Corrosion resistance; 3.) Easy clean and reuse; 4.) Large filter area; 5.) High dirt holding capacity; 6.) Excellent anti-acid,anti-alkahi,resist-temperature,resist-wearing;resist-recycling; 7.) Low pressure drop due to high porosity; 8.) Long life span; Material: Filter Media Woven mesh or perforated mesh made of stainless steel 304, 304L, 316, 316L, 317L, 904L, & Monel Hastelloy etc. Stainless steel sintered fiber wire mesh and stainless steel wire woven cloth.(é«?ç?®); Filter Rating: 3-300um; Operating temperature: â?¤800; Filtering Efficiency: 99%; Gasket: PTFE, Viton, Silicone, Buna-n EPDM; Connector: Flange, thread, based on customization; Structure: 1. The outside protection cylinder made of perforated stainless steel plate protect the filter element from damage; 2. Pleating waves increase the filtration area to reduce the operation cost; 3. Imported sintered fiber metal felt enjoy supreme filtration and easy cleaning. 4. The pressure resistance of stainless steel tube supporting inside core reach 175 bar. Applicant: 1.) Chemical fiber, film industry: filtration and purification of melting-polymer; 2.) Petroleum, chemical, power field: filtration of high temperature, corrosion liquid; 3.) Mechanical device that each kind of hydraulic fluid, lubricating oil secondary filter; industrial and so on; 4.) Pharmacy, biology, drinks industry: liquid filtration; 5.) Air bag: filtration and cooling of hot gas; Pre-sale service 1.) Your inquiry will be responded within 8 hours; 2.) Our technical team help you to select the suitable model; 3.) Design and tailor-service for you based on your requirements; After-sale service: 1.) Warranty period is 12 months; 2.) Our technology team will support you for forever; 3.) Engineering service is available for your machinery overseas

Product Introduction The SUS316L powder sintered filter cartridge is a type of filter cartridge used for filtration in various industries such as pharmaceuticals, food and beverage, electronics, and water treatment. The L stands for low carbon content, which further enhances its resistance to corrosion and makes it suitable for use in environments that are prone to corrosion. The SUS316L powder sintered filter cartridge is made by compressing and sintering stainless steel powder to form a porous structure with uniform pore size and distribution. This structure allows forhigh flow ratesand efficient filtration of particles and contaminants from fluids. Features 1. High filtration efficiency: The multiple layers of stainless steel mesh provide a high filtration surface area, which results in a high filtration efficiency. 2. High-temperature resistance: SUS316L stainless steel can withstand high temperatures, which makes it ideal for applications where high-temperature resistance is required. 3. Long service life: The sintered metal powder structure of thefilter cartridgeresults in a high-strength, durable filter that has along service life. 4. Wide range of applications: SUS316Lpowder sintered filter cartridgesare suitable for a wide range of applications, including in the chemical, pharmaceutical, food, beverage, and water treatment industries. Applications SUS316L powder-sintered filter cartridges are commonly used in applications where high-performance filtration is required, and where the filter cartridge needs to withstand high temperatures, pressures, and corrosive environments. Pharmaceuticals: SUS316L powder sintered filter cartridges are commonly used in pharmaceutical manufacturing processes to filter out contaminants and impurities from liquids, including water, solvents, and drug formulations. Food and beverage: In the food and beverage industry, SUS316L powder sintered filter cartridges are used to filter out impurities from liquids such as juices, beer, and wine, and to remove particulate matter from cooking oils. Electronics: SUS316L powder sintered filter cartridges are used in the electronics industry to filter out particulate matter from chemicals and solvents used in the manufacturing of electronic components. Water treatment: In water treatment plants, SUS316L powder sintered filter cartridges are used to filter out impurities and particles from water, including sediment, bacteria, and other microorganisms.

Stainless steel powder sintered filter element is a kind of filter material, which is made of stainless steel powder sintered at high temperature. The filter element has high permeability, can effectively filter tiny particles and impurities, has high corrosion resistance and durability, and is suitable for liquid and gas filtration in various chemical, food, pharmaceutical, electronic and other industries. Product parameters Diameter: 50mm-1200mm Length: 100mm-2000mm Filtration accuracy: 1 m-100 m Filtration area: 0.1-1000 Maximum working temperature: 600 C Resistance coefficient:

Sintered stainless steel mesh filter is a new type of filter material made of multi-layer metal woven wire mesh through special lamination pressing and vacuum sintering. The meshes of each layer of wire mesh are interlaced to form a uniform and ideal The filtration structure has excellent filtration accuracy, filtration resistance, mechanical strength, wear resistance, heat resistance, cold resistance and processability, especially ideal for filtration that requires high compressive strength and uniform filtration precision. Parameters: Material: 316L stainless steel Filtration accuracy: 0.22-100um Size: standard or customized Application: (1) Used as dispersion cooling material in extremely high temperature environment; (2) Orifice plate material for gas release liquid fluidized bed; (3) Used for high-precision, high-reliability high-temperature filter materials; (4) Used for high pressure backwash oil filter. Examples: (1) Precision filtration of various hydraulic oils and lubricating oils in the machinery industry; (2) Filtration and purification of various polymer melts in the chemical fiber film industry, filtration of various high-temperature corrosive liquids in the petrochemical industry, filtration, washing and drying of materials in the pharmaceutical industry; (3) Application of gas homogenization in powder industry, fluidized plate in steel industry; (4) Buzzer, etc. in explosion-proof electrical appliances; (5) Gas-solid, liquid-solid, gas-liquid separation. Performance advantages: 1. High strength and rigidity: high mechanical strength and compressive strength; 2. High precision, uniform and stable: uniform filtering performance can be achieved for the filtering particle size with a precision of 1~300 m, and the mesh does not change during use; 3. Wide range of use environments: It can be used for filtration in temperature environments ranging from -200 C to 650 C and acid-base corrosive environments; 4. Excellent cleaning performance: good countercurrent cleaning effect, can be used repeatedly, and long life (can be cleaned by countercurrent water, filtrate, ultrasonic waves, dissolution, baking, etc.).

Acrylic acid (IUPAC: propenoic acid) is an organic compound with the formula CH2=CHCOOH. It is the simplest unsaturatedcarboxylic acid, consisting of a vinyl group connected directly to a carboxylic acid terminus. This colorless liquid has a characteristic acrid or tart smell. It is miscible with water, alcohols, ethers, and chloroform. More than a million tons are produced annually For price, specification and other details please contact us.