We are capable of supplying 200 tons of Clear and Soft PVC Roll Scrap on a monthly basis. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Transparent Application : Sheet, Board, Bag, Packaging, Floor, Wall... Grade : Flexible Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Roll, Sheet Unit : Ton/Tons FOB Price : $600.00 - $800.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales Interested PVC Roll Scrap buyers, please do contact us with the details of your scrap requirement and your preferred terms of payment. Hope to hear from you soon.
We are capable of supplying 200 tons of Clear and Soft PVC Roll Scrap on a monthly basis. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Transparent Application : Sheet, Board, Bag, Packaging, Floor, Wall... Grade : Flexible Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Roll, Sheet Unit : Ton/Tons FOB Price : $600.00 - $800.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales Interested PVC Roll Scrap buyers, please do contact us with the details of your scrap requirement and your preferred terms of payment. Hope to hear from you soon.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Oxidized starch - TS is a Chemically Modified, Vegan, Gluten-Free, Plant-based, Non-GMO tapioca starch. Oxidized starch is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. Oxidized starch is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS Oxidized starch is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc., Oxidized starch can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness Oxidized starch is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies In baking industry, Oxidized starch expands and improve physical possessions and physical properties of dough, increases its capability to hold gases FROZEN FOODS Oxidized starch is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. Oxidized starches are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface. FEATURES AND BENEFITS Oxidized starch has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening It is highly bio-degradable and causes no harm to the Environment. Oxidized starch is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
EnzoPlast TS 8 is a Chemically Modified, Vegan, Gluten-Free, Plant- based, Non-GMO oxidized tapioca starch. EnzoPlast TS 8 is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. EnzoPlast TS 8 is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS EnzoPlast TS 8 is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc., EnzoPlast TS 8 can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness EnzoPlast TS 8 is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies In baking industry, EnzoPlast TS 8 expands and improve physical possessions and physical properties of dough, increases its capability to hold gases FROZEN FOODS EnzoPlast TS 8 is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. EnzoPlast TS 8 are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface. FEATURES AND BENEFITS EnzoPlast TS 8 has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening It is highly bio-degradable and causes no harm to the Environment. EnzoPlast TS 8 is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
We are interested to supply 200 tons of Mixed Color LDPE Film Scrap in bales on a monthly basis. We wish to make a long term scrap business deal with the reliable LDPE Film Scrap buyers from all over the world. Materials : LDPE Place of Origin : JAPAN, US, EUROPE Color : Mix color Application : Film Bag and Pipe Grade : Film Type : Post Industrial Waste Quality : Clean and 2-3% shortage Form : Film Unit : Ton/Tons FOB Price : $200.00 - $300.00 Minimum Order : 20 Tons Payment Term : T/T 50/50 and L/C 100% at sight Price Term: FOB Port of shipment: Sendai Port Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
Origin: Japan Category: PVC Type: Regrind Color: White Loading Weight: 25 Tons Quantity: 25 Tons
APET clear sheet regrind. All post-industrial regrind, no label, very clean. 40-42k lbs per container. 2-3 loads per month Subject unsold
PVC Agricultural Film Plastic Scrap MATERIAL : PVC Agricultural Film CATEGORY : PVC TYPE : Film GRADE : Light Blue SPECIFICATION : From post-industrial, 100% PVC, no coating ORIGIN : Japan LOADING WEIGHT : 24 Tons FOB (USD/Ton) : 400-700
HIPS regrind from Yogurt production Waste less than 1% Material : HIPS regrind from Yogurt production Waste less than 1% Category : HIPS Type : Regrind White Grade : Specification : Product- HIPS regrind post production from Yogurt caps Waste less than 1% Material is post industrial , regrind . Origin : Israel Loading Weight : 24 Ton FOB (USD/Ton) : 720$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days
HDPE Blow Molding Mixed Color Plastic Scrap Material For Sales MATERIAL : HDPE blow molding mixed color CATEGORY : HDPE TYPE : blow molding GRADE : mixed color SPECIFICATION : HDPE Post industrial blow mold grade. .35 Melt .955 Density mixed color but a lot of boxes are white/natural. 10x loads a month ORIGIN : US LOADING WEIGHT : 18-20 Tons CFR (USD/Ton) : 800-1000$ Asia main ports
MATERIAL : PVC Soft Clear CATEGORY :PVC TYPE :soft GRADE :clear SPECIFICATION :Oil 80-90%, Non-regrind, On bales. Faulted product, have not used. ORIGIN : Japan LOADING WEIGHT : 25 Tons FOB (USD/Ton) : $750-950
MATERIAL : PVC Soft Clear CATEGORY :PVC TYPE :soft GRADE :clear SPECIFICATION :Oil 80-90%, Non-regrind, On bales. Faulted product, have not used. ORIGIN : Japan LOADING WEIGHT : 25 Tons FOB (USD/Ton) : $750-950
Category: PVC Type: Regrind Origin: Japan Specification: PVC Sheet Reground Clear, Packing will be in fle-con bag & paper bag. The quality and color are as previously supplied. Loading Weight: 24 Tons Quantity: 24 Tons
We are interested to supply 200 tons of Mixed Color LDPE Film Scrap in bales on a monthly basis. We wish to make a long term scrap business deal with the reliable LDPE Film Scrap buyers from all over the world. Materials : LDPE Place of Origin : JAPAN, US, EUROPE Color : Mix color Application : Film Bag and Pipe Grade : Film Type : Post Industrial Waste Quality : Clean and 2-3% shortage Form : Film Unit : Ton/Tons FOB Price : $200.00 - $300.00 Minimum Order : 20 Tons Payment Term : T/T 50/50 and L/C 100% at sight Price Term: FOB Port of shipment: Sendai Port Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales If your company is interested to make a deal, please do contact us. We are waiting to hear from you.
We are interested to supply 200 tons of Mixed Color LDPE Film Scrap in bales on a monthly basis. We wish to make a long term scrap business deal with the reliable LDPE Film Scrap buyers from all over the world. Materials : LDPE Place of Origin : JAPAN, US, EUROPE Color : Mix color Application : Film Bag and Pipe Grade : Film Type : Post Industrial Waste Quality : Clean and 2-3% shortage Form : Film Unit : Ton/Tons FOB Price : $200.00 - $300.00 Minimum Order : 20 Tons Payment Term : T/T 50/50 and L/C 100% at sight Price Term: FOB Port of shipment: Sendai Port Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales If your company is interested to make a deal, please do contact us. We are waiting to hear from you.
PVC OG powder+lump regrind LS100 Material : PVC OG powder+lump regrind LS100 Category : PVC Type : OG powder+lump regrind Grade : LS100 SPECIFICATION : LG Chem product.6 colors included (white , grey ,blue, red, black , green),seperated by bag.K-Value : 67. Datasheet attached Origin : Korea - Busan Loading Weight : 23 Ton FOB (USD/Ton) : 650$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days
HDPE Pallet Regrind Plastic Scrap MATERIAL: HDPE pallet regrind mixed color CATEGORY: HDPE TYPE: Pallet regrind GRADE: Mixed color SPECIFICATION: HDPE regrind mixed color from pallet manufacturer, washed, regular supply ORIGIN: Japan LOADING WEIGHT: 20 Tons FOB (USD/Ton): 700-900
The color is mixed per attached photos, not 100% clear on the regrind. 34k lbs is thr regrind pics. rest is all clear parts. It is the clear pmma with black. 40,000 lbs net
The color is mixed per attached photos, not 100% clear on the regrind. 34k lbs is thr regrind pics. rest is all clear parts. It is the clear pmma with balck. 40,000 lbs net
