Film Shrinkage Tester Thermal Shrink Tester Suppliers and Manufacturers

Small size and lightweight, convenient to carry, Easy and safe to use, no sparking 6 LED displays, clearly present the alternator and battery state. Two testing clips for safe and easy operation. Suitable for 12V lead-acid batteries, hardtop batteries, discharge batteries, and maintenance-free batteries heavy duty insulated clamps. Multiple functions- Alternator state check, battery state check, Battery overload display With a good chip inside, not easy to get hot on the surface, suitable for cars, motorcycles, etc.

ModeL24/1548/1548/30110/05110/10220/05220/10 Cell voltage measurement type2V/6V/12V Cell voltage measurement range2V:04V;6V:08V;12V:015V Cell voltage resolution2V/6V:0.001V;12V:0.01V Voltage measurement range of battery string030V060V060V0135V0270V0270V String voltage resolution0.01V0.1V Voltage testing accuracy0.5% Discharge current working range2A150A2A150A2A300A250A2-100A250A2100A Constant current discharge voltage range21V30V42V60V42V60V90140V90140V180270V180270V Discharge PowerMax. 4.5kwMax. 9kwMax. 18kwMax. 7kwMax. 13.5kwMax. 13.5kwMax. 27kw Current testing accuracy1% Battery capacity check range20Ah1500 Ah20Ah1500 Ah20Ah3000 Ah20500Ah201000Ah20500Ah201000Ah Current testing accuracy1% Capacity check testing range extensionOne external load added, the testing capacity range doubled Cell data collection methodwire,wireless(optional) Monitoring current range0300 A Working voltageAC220 Cooling modeRefrigeration by blast Working environment;20%80%RH Storage condition-20;C storage and transport Communication modeRS232 communication Data storage modeSD card Display mode4.7 inch TFT Instrument dimensions(mm)400*243*301430*248*381400*243*301 Weight(Kg)141714 Carry methodPortable type Dimensions : 40*24*30cm Weight : 13kg Packing: as your option

Weight:20kgs/ctn

1)test injecting angle, atomization, dribbling and automatic testing and cleaning Press auto key. The pump start to work automatically, after work over, the pump turn off automatically, the injector keep injecting for 15s, the time valve decrease to 0, can observe the injecting angles, atomization and volume, replace or clean the injector, if appears gush, unusual angels and unusual volume, stop injecting for 30s, and observe injecting volume, time value shows 30s, the liquid will back to the fuel tank in the following 30s, then start dribbling testing for 60s, if no dribbling, the unit will starts regular testing automatically. 2)test mode at idling speed Conduct the injecting test as follows: Injecting rpm: 1600r/min Pulse width: 2.2ms Count: 3000 Timing: 112s When the producer is over, observe the injecting uniformity, and replace or clean it if the volume over 9% 3)test mode at maximum loading Conduct the injecting test as following: Injecting rpm: 4000r/min Pulse width 2.8ms Count 3000 This program can observe the injecting volume at the maximum loading 4)test mode at high speed Conduct the injecting test as following: Injecting rpm: 6500r/min Pulse width 2.5ms Count 4000 Timing 36s This program can observe the working state at the high speed. 5)test injecting with complete procedure During this procedure pulse width is 2.2ms, rpm is 1600r/min, then the rpm will up to 9975r/min, pulse width will up from 3ms to 12ms, then down to 1.1ms.Total cycle is 5 times, and running time is 20s, observe for 30s after the test, then the liquid will return for 30s. During the automatic test, press selection to pause it as you need. 53.5*48.5*55.5

Toyota Denso Test 2: (DST-2) for TOYOTA & LEXUS enables you to diagnose electronic control systems for engines, ABS's and airbags, even through Communication Diagnosis DST- 2 realizes more accurate diagnosis through CAN communication that speed is 50 times faster than conventional. Easy operation on LCD display with touch panel 5.7inch full color display with touch panel assists an easier operation. Voltmeter and Oscilloscope Not only communication basis diagnosis [Diagnostic code, ECU data monitor, Active test], but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part. Data recording to your PC saved data such as data-list can be downloaded to your PC. All type of Toyota(made after 2000) and Lexus included read code, clear code , data flow, action testing and guard against theft initialization function. And it also supports OBD-II. Toyota denso it2 character: 1. Touchscreen & back lighting control 2. Easy & quick 3. User needn't worry about the after service since factory has an open patio for maintenance. Toyota Tester2 Main Unit Specification: Dimensions: 145mm (W) x 223mm (H) x 71mm (D) Weight: Approx. 1380g Source Voltage: DC10-32V Power Consumption Normal: 7W (12VDC), Charging: 10W (12VDC) Operation Temperature: 0~45C Storage Temperature: -10~60C LCD display: 5.7 inch color STN (320x240), transparent type of 256 colors Adjustable brightness/contrast Touch panel Input: by finger or stylus pen Key: 4 (up, down, two function keys) Built-in clock for a time stamp PC Communication: PC card slot CFx1ch (CF standard type I, II) USB Host: 1ch. Toyota Denso IT2 Function: 1ch Serial 1ch (RS-232C) Vehicle communication CAN, ISO9141 .Back up power supply: Lithium-ion battery 7.4v 1000mAH Recharge hour ( at normal temperature) Approximate operating time: 5 hours ( fully discharge to full charge) 80 minutes (normal operation) Voltage Measurement Function Items Specification Maximum sampling rate 250s/sec Input channel 1ch Voltage range ( vertical scale) 1V/div, 2V/div, 5V / div Time range ( horizontal scale) 100ms / div, 200ms / div, 10s / div Oscilloscope Function Items Specification Maximum sampling rate 500ks/sec Input channel 2ch Trigger functions Mode Auto, normal, single Trigger 10%, 50%, and 90% of the monitor Voltage range ( vertical scale) 100mV / div, 200mV / div, 500mV / div ~10V / div Time range ( horizontal scale) 5us / div, 100us / div, 200us / div, ~10s / div( 200ms and higher is the Roll mode) Toyota denso IT2 Package List: - Mainframe -- 1pc - OBD-II -- 1pc - Charging line -- 1pc - Lin line -- 1pc - Measuring leads for multimeter 1 -- 1pc - Measuring leads for multimeter 2 -- 1pc. After sale service: 1) Free update during one year 2) Free repair and maintenance service in one year 3) Free technical support by internet or via phone.

BMW group tester one (GT1) GT1 is offered to the aftermarket in the same specification that is currently supplied to BMW franchised dealers. It is special-purpose tool of BMW Series. Gt1 is supplied with a Pentium based laptop PC on a Windows platform connected to a high specification communications and measurement interface. GT1 can complete coverage of ALL BMW systems, one thing that can only be done using the GT1, this function is called Electronic Control Unit (ECU) programming and configuration. Many of the original electronic systems on modern vehicles can now be re programmed using software; historically any changes to rectify software problems would involve a new ECU which would be purchased from the parts department and that is the only way that the independent market today is able to overcome these problems. The BMW GT1 system allows you re programme all BMW car ECU's to fix software or to install a blank ECU to a repaired vehicle. GT1 is the only system that allows you to do this and is absolutely essential if working on Freelander , the GT1 is also the only system that provides all diagnostics and programming for the very latest BMW launched this year. BMW GT1 software kit comprises of five system ,TIS system .DIS data system ; diagnosis system .measuring system and management system . you can to test and check data information same time in GT1. Test function : Read faulty code , clear faulty code , data stream. Activate state, programming , component test , maintenance data information , components location , wiring diagram etc..., tis and dis are supply all of system diagram of all of bmw car, components location, maintenance method and coding information etc. Can do completely of BMW car system. 1. GT1-SCAN Pro main body 2. Network cable 3. GT1 for vehicles with 20pin diagnostic connector 4. GT1 for vehicles with OBII diagnostic connector 5. Latest diagnostic version of software(one HDD).

Denso diagnostic tester-2 (dst-2) for toyota & lexus enables you to diagnose electronic control systems for engines, abs's and airbags, even through communication diagnosis dst- 2 realizes more accurate diagnosis through can communication that speed is 50 times faster than conventional. Easy operation on lcd display with touch panel 5.7inch full color display with touch panel assists an easier operation. Voltmeter and oscilloscope not only communication basis diagnosis [diagnostic code, ecu data monitor, active test], but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part. Data recording to your pc saved data such as data-list can be downloaded to your pc. Dst-2 main unit specification: Dimensions: 145mm (w) x 223mm (h) x 71mm (d) Weight: approx. 1380g Source voltage: dc10-32v Power consumption normal: 7w (12vdc), charging: 10w (12vdc) Operation temperature: 0~45c Storage temperature: -10~60c Lcd display: 5.7 inch color stn (320x240), transparent type of 256 colors adjustable brightness/contrast Touch panel input: by finger or stylus pen Key: 4 (up, down, two function keys) Built-in clock for a time stamp Pc communication: pc card slot cfx1ch (cf standard type i, ii) Usb host: 1ch. Package list: - mainframe -- 1pc -obd-ii -- 1pc -charging line -- 1pc -lin line -- 1pc -measuring leads for multimeter 1 -- 1pc - measuring leads for multimeter 2 -- 1pc Update and warranty: - update for free for one year by sending cd. - one year warranty. Standard packing

Description: The functions as following: 1o test and analyze the injecting state. 2o test the injector dribbling. 3o test the injecting angle and atomizing. 4o test the injecting volume. 5o test the injector uniformity. 6o test conduct the physical and chemical cleaning of the blocked or trouble injector, ultrasonic cleaning, test cleaning nd on-vehicle cleaning. 7o test the open and close injecting pressure of the injector. 8can clean the engine without dismantling (choose matched connector). 9can operate the auto static testdynamic test and selective test with the injecting dribblinganglesatomizationuniformity of one or more(1-4) injectors, can simulate any state of the vehicle to observe the complete process of injectors. 10.Can operate automaticallyreverselyand ultrasonic cleaning with one or more injectors at different

Sxzr-10a is single phase dc winding resistance tester which designed specifically to measure dc resistance values of transformer windings and any dc resistance of an inductive device. , controlled by high speed scm, easy to use. , selectable current positions, large measurement range, suitable for the dc resistance values measuring of large-medium transformers. , full protection functions to ensure safety and availability. , auto discharging and discharging indicator. , intelligent power management technology, small consumption, less heating. , 320x240 true color lcd screen. , built-in thermal printer. , perpetual calendar, 1000 groups data storage no lost even power failure. , rs232 and usb interface, easy communicate with pc and u disk.

Technical Parameters Method of Display 7 inch color touch LCD with English display Method of Testing MPU controlled electrolysis(Karl Fischer Coulometric Method) Rate of Electrolysis 2.4mgH2O/min Electrolysis Current Auto-control within 430Ma Testing Range 0.01ugH2O-200mgH2O Water Content Range 0.0001%(1ppm)—100% Sensitivity 0.01ugH2O Accuracy Water Content: 2ugH2O-100ugH2O; Deviations=±1ug, Water Content: 100ugH2O-1000ugH2O; Deviations=±2.9ug, Water Content: >1000ugH2O; Deviations=±0.2%(excluding deviations of sample injection)      Drift Compensation Auto-control via MPU Stirring Speed Adjustable and steerable End-point Indication LCD display /output via printing / voice warning / end-point indication light Data Input Input via touch screen Sample Number Numbered by users Storage Infinite storage capacity Printer Thermal printer, high-speed, low-consumption, with 44 millimeter-wide paper Printing Content  ug / ppm / mg/L / sample number /experimenter / date Calendar/Clock automatic display and print analyzing time and date Self-checking Breakdown self-checking Special Function Work independently or connected with laptop or other computers Power Consumption

Brief introduction: St805 pon power meter is specially designed for pon network construction and maintenance which can be connected between olt nad ont. The voice, data, video signal online can be measured and displayed synchronously with this meter. Key features 1. Test the three wavelength of the pon network synchronously: 1490nm, 1550nm, 1310nm 2. Can test the burst mode signal of 1310nm 3. Can set the threshold value, upload data, calibrate the wavelength through management software. 4. Can save 1000 records and upload the records to the management software 5. Supply 10 groups threshold values 6. En menu display 7. Auto shut off backlit 8. Real-time display Technical specifications Standard wavelength: 1310(up); 1490(down);1550(down) Pasband(nm):1260f+1360; 1470f+1505; 1535f+1570 Range(dbm): -40f++10; -40f++10; -40f++20 Isolation.1310nm++db++: ; >40; >40 Isolation.1490nm++db++: ; >40; >30 Isolation.1550nm++db++: ; >40; >40 Accuracy: Uncertainty++db++:F+0.5 Polarization relevant loss(db++:

ST3200 OTDR (Optical Time Domain Reflectometer) is an intelligent optical fiber communication tester. This tester is easy to use and portable, which has a 3.5-inch color LCD touching screen. It also possesses events intelligent analysis and more user---friendly operation. It is an ideal test instrument for the fiber testing and troubleshooting. It can test the length of optical fiber and optical fiber cable attenuation coefficient. It can exactly display the loss distribution curve of the optical fiber and cable as well as the loss between two points and the joint loss. It also can test the distance between two points and the position of joint, fault point as well as breaking point. This tester has VFL (Vision Fault Locating) system. So it becomes convenient to test the fault location of jumper wire. Main functions: * Test the distance between two points and dynamically display the distance between two cursors * Test the loss between two points and the loss constant of the optical fiber and cable * Test the joint loss * Auto-optimization and quick response * Search for the event points automatically * The function of wave form storage: it can store the wave form data and test condition into the disk and the stored information also can display again. * Support the function of copy: it can copy the data file which is built in the internal disk into the U-disk directly. D, w, h: 200mm, 100mm, 60mm.

2m transmission analyzer Basic functions 2m measurement Hdb3 and ami line codes Out-of-service 2mb/s, n*64kb/s ber testing In-service framed and unframed double-channel testing Pcm simulator''mode testing Frame data control and monitoring Timeslot activity monitoring, fas, n-fas, ts16mfo analysis Built-in 64kb/s tone channel listen capability Cas and ccs signaling generation and monitoring Round trip delay measurement Aps delay measurement Extensive error and alarm generation Vf tone generation and measurement Level measurement Pulse mask measurement Jitter measurements to itu-t standard o. 172 Frequency and offset measurement Clock slip measurement Up to +/-999ppm transmit clock deviation Clock source: internal, interface or external 2m clock/signal Real-time transmit circuit open/short indication

Designed to test all types of relays. 6 x 30 a ac/dc 4 x 125 v ac/dc 1x 3 a /100v 1 x 0-265 v aux DC 8 binary inputs 4 binary outputs Rs 232, ethernet port Based on linear power amplifier techmology, the test set is highly accurate and is the economical solution for relay testing. 15 kg

Overview Light digital relay protection tester characteristics 4 6 8 pairs of 100M Optical Fiber Communication Ethernet interface, can send and receive the sampling value of the IEC61850 9 1 2 frame format, Goose, IEEE 1588 packets more support 24 sets of SV packets 64 groups of Goose packets simultaneously 3 5 pairs of 2 10M fiber serial port, can send and receive IEC60044 7 8 FT3, national network expansion FT3, Xu Ji privately owned FT3 frame format sampling value 12 road simulation small signal output, provides testing of protection devices input for small signals Technical parameter Fiber Ethernet port 4 6 8 pairs 100 Mbits S, ST, Mode, 1310nm IEC61850 9 1 2 Le, Goose, IEEE-1588 Send dispersion

After years of research and development our company has successfully developed a series Battery discharge tester with high intelligence and precision with its proprietary technology. Discharge meter can be in offline mode battery as discharge load Through continuously regulating discharge current constant discharge current at the set value can be realized. When discharging the instrument will automatically stop discharging when the battery terminal voltage or monomer voltage falls to the set lower limit or the set discharge time or the set discharge capacity and record all valuable and continuous real-time process data. Battery discharge meter system the voltage monitoring information of single battery is simple safe and accurate with wireless relay access. Battery discharge meter has a very friendly man-machine interface which can not only complete all kinds of settings and data query under the prompt of menu but also save the process data of discharge in the memory of the equipment transfer to the U disk through the data interface and analyze the data through the special software of the upper computer to generate the required curve and report.

M-Benz Compact 3-Star Diagnosis Tester Compact3 STAR is the professional diagnostic equipment for Mercedes Benz cars manufactured after year 2000,it is the replacement of HHT. Compact 3-Star operate based on the Windows XP system,it includes workshops information system(WIS system),the movement management system(STARUTILITIES)and the automatically diagnose system(the DAS system) Optional Config: DAS 80G HD(include WIS+EPC+ST-Finder)(Optional) IBM T30(installed with DAS+WIS+EPC+ST-Finder)(Optional) ToolBox(Optional) Compact 3 DAS 10/2008, WIS 10/2008, EPC 08/2008 version STfinder 2008 Languages: English/Chinese/Deutsch/French/Italian/Korean/Spanish/ Portuguese/Finnish/Danish/Japan/Swedish Note: - Compact3 STAR works with original computer (COMPACT 3) via RS485 protocol. - The maximum transmission length is 100 meters. - Strong anti-jamming The package include: Multiplexer D4 x 1pc OBD II cable x 1pc (originally OEM) 4 PIN cable x 1pc (originally OEM) 38 PIN cable x 1pc (originally OEM) 14 PIN TRUCK cable x 1pc (originally OEM) RS232 to RS485 cable x 1pc

Genenal information Ac/dc hipot testing is the effective and direct way to test insulation strength for electric equipments.It check dangerous flaws and make sure electric equipment continuous working.It typically used to test insulation strength for all kinds of electrical equipments, components like capacitors, insulation materials.Our hipot tester also used for ac, dc, ac/dc hipot testing. Wooden case

DTDL-8110 Cablefault Test Set is an integrated set of Cablefault Detection and Location Devices. It is applicable for many types of power cable, communication cable and optical cable. It can accurately measure the distance of cablefault and locate the fault point. The system includes: 1) DTDL-8110 Mainframe. 2) DTDL-8032R Receiver. 3) RF Inductive Tracking Rod. 4) Potential Difference Locating Rack with 2 pins. 5) AF Stethoscope and Headphones (for Listening mode). 6) Grounding Pin.