TXP offshore basket have been designed and manufactured refer with DNV 2.7-1 and. All unit are design in stackable concept for minimize working space and storage space. And Built in lifting pad-eye and ISO corner casting for easy to transport. All Sling and shackle, we certified by 3rd party inspector as standard. For Painting, we use offshore paint system with SA 2.5 and 3 layer coat system. We can paint logos/decals refer from customer requirement.
Calcium chloride(CaCl2) is a common salt. It behaves as a typical ionic halide, and is solid at room temperature. Specification: Purity:74%, 77%-80%, 90%, 94%-97% Appearance: White Powder / Flake / Granule / Pellet
We have thread protector for the casing and drill pipe for protect the contaminate from environment to inside the pipe with low pressure. Light Duty Plastic Only available in Open End design Designed for environmental protection Most economical choice Made from Polyethylene Grey in color Heavy Duty Plastic Only available in Closed End design Made from Polyethylene Pressed Steel Made from light weight steel Designed with a square hole in center for removal tool
The Flushby unit is also called Rapid service rig(RSR),is multifunctional equipment mainly used for well flushing and sand washing in thick oil well, and performing quick workover service of shallow to a thick oil well. It is the next generation of service machine that outperforms service unit, pump truck and crane truck working together. the flushby unit shows the excellent performance in the oil well service.no matter in saving cost,or improving the efficiency, the flushby unit is better than conventioal workover rigs. Nowadays,the flushby unit becomes a "first call" or "first choice" option for workover work
The PT centrigugal pump features a rugged design with heavy duty construction that reduces downtime and total cost of ownership for operators and contractors in today's highly competitive drilling industry.
1. Structure of FRP Process Pipe Description 1) Anti-fouling, anti-moth, non-rust, keeping water from pollution; It also apply to carry the polluted water, slurry and seawater; 2) The ability of water resistance and corrosion resistance can prolong product service life; 3) The connection of insert makes air proof excellent; project cost can be reduced without building concrete protect layer; 4) Few joint and various of joint methods not only reduce water resistance but also project cost; 5) Good insulation, heat resistance, combustration resistance; No distortion in high temperature of 80-100 degree; 6) With light weight, high strength, the hoisting cost can be decreased, also expedite installation proceeding; 7) Low maintenance expense: no need for anti-rust, anti-pollution, insulation, heat preservation and the relative examination and repair; cathode protection free also can save the project maintenance cost. -
wireline BOP lubricator Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. The TIS lubricator and riser section range is available with the following options : 3" ID to 9" ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 °C Choice of quick union or API flanged connections Choice of bleed port connections -
Hydraulic Ram Wireline BOP Size: 2 1/2"- 6 3/8" Pressure: 3000-15000PSI Ends: Flange,Thread, Union 4130/4135 Forging Blowout Preventers are designed to give positive protection against blowouts when operating with wire line in well services work, by providing a positive seal around wire line. This BOP's are available basically in two types: Hydraulically Operated and Manually Operated, with configurations as desired. An equalizer valve allows the operator to equalize the pressure with lubricator pressure. Blowout Preventers are available in sizes ranging from 2-1/2" ID through 6-3/8" ID and 3000 PSI through 15,000 PSI working pressure. Contact factory for details on pump, fittings, hoses and other accessories. -
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options The TIS lubricator and riser section range is available with the following options : 3" ID to 9" ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 °C Choice of quick union or API flanged connections Choice of bleed port connections -
quad rams slickline BOP/wireline BOP Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options The TIS lubricator and riser section range is available with the following options : 3" ID to 9" ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 °C Choice of quick union or API flanged connections Choice of bleed port connections -
Fibreglass Reinforced Plastic FRP fittings It is a general name of the spare parts which play such functions like connecting, controlling, burning, diverting, sealing, supporting, etc. in a fibreglass pipeline system. Production range: Diameter: DN40-DN4000; Pressure rating: 0.1Mpa-25Mpa. Product standards: SY/T 6267-2006 Specification for high pressure fibreglass line pipe SY/T 6266-2004 Low pressure fibreglass line pipe and fittings Range of application: Oilfield: oily water transmission; crude oil transmission; Chemical: corrosion-proof pipeline for chemical plants; pipelines for power plants; Municipal works: used for municipal water supply and urban drainage; Other: internal components of GRP vessels, etc. Product characteristics: Excellent physical properties, light weight and high strength; Good corrosion resistance and long service life; Stable chemical structure and no secondary contamination; Good insulation performance and good design ability; Low heat conductivity coefficient and low heat loss; Very smooth inner wall and excellent hydraulic properties; No buildup of scale and wax, saving maintenance costs; Easy installation and low comprehensive costs. -
A. Slick Drill Collar Note: Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. The Drill collar are manufactured strictly from API Spec7-1 and SY5411 standard. B. Spiral Drill Collar Note: Spiral drill collar is used to reduce contact area with hole so as to avoid efficiently bit sticking from diffirential pressure. The drill collars are manufactired strictly according to API Spec7-1 and Standard SY5144 C. Spiral Drill Collar With Elevator Groove And Slip Groove Note: Elevator groove and slip groove made on box thread face of slick drill collar or spiral drill collar can be used as lifting sub and safety slip when trip out. The technical parameters for elevator groove and slip groove is as per API SPEC7-1. Hardbanding is optional at customersâ?? requests. D. Non-magnetic Drill Collar The as cold rooled finish on both ID and OD surface with unique technical process strengthen the structure and ensures the tools with optimal resistance to stress,corrosion,cracking and the mechanical performance is greatly enganced.
A. Slick Drill Collar Note: Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. The Drill collar are manufactured strictly from API Spec7-1 and SY5411 standard. B. Spiral Drill Collar Note: Spiral drill collar is used to reduce contact area with hole so as to avoid efficiently bit sticking from diffirential pressure. The drill collars are manufactired strictly according to API Spec7-1 and Standard SY5144 C. Spiral Drill Collar With Elevator Groove And Slip Groove Note: Elevator groove and slip groove made on box thread face of slick drill collar or spiral drill collar can be used as lifting sub and safety slip when trip out. The technical parameters for elevator groove and slip groove is as per API SPEC7-1. Hardbanding is optional at customersâ?? requests. D. Non-magnetic Drill Collar The as cold rooled finish on both ID and OD surface with unique technical process strengthen the structure and ensures the tools with optimal resistance to stress,corrosion,cracking and the mechanical performance is greatly enganced.
Material: E75/X95/G105/S135 OD: 2 3/8" to 6 5/8" Wall Thickness: 6.45mm to 12.7mm Length: R1(6.10-7.01meters) R2(8.84-9.75meters) R3(12.19-13.72meters) Hard band: Arnco100XT, Arnco200XT and Arnco300XT; Botn1000, Botn3000, TCS8000, TCS-Titanium, Armacor M etc. Also we can make according to customers' requirements. Standard: API 5DP RSC Type: NC26 NC31 NC38 NC40 NC46 NC50 NC55 6-5/8FH UPSET: EU(External upset) IU(Internal upset) IEU(Internal & External upset) Technical: Hot Rolled Surface treatment: blank oil painting Packing: 6/9/12 pieces in a bundle packed with steel holder Third party inspection: BV_SGS_ISO Usage: oil gas industry, well drill industry
Product details of API Spec 7-1 standards Drilling Rig Square Kelly and Hexagonal Kelly for Sale Kelly is the drive part of whole drill string, it transmit the torsional energy from the rotary table to the in the bottom of the hole. The precision-machined kelly is a heavy square or hexagonal steel bar supported by the swivel through the rotary table and connected to the first joint of drill pipe in the drill string. Our kelly has been approved by the NS-1 certification. Straightness is the key manufacturing process. Straightness is checked before, during and after each machning operation. Flats are precision-milled to API and NS-1 specifications. All milling is performed on specially designed rigid kelly mills.Each kelly is furnished with a pressed steel thread protectors. Features of Kelly They are made of AISI 4142H-4145H forged or rolled alloy structural steel. Quenching plus tempering thermal treatment will be conducted over the whole length. Its Brinell hardness can reach 285-341 on the basis of such thermal treatment. Charpy impact energy: 54J. The formulated process can ensure that the misalignment of the hole reaches the standard wall thickness. When ordering the Kelly please specify: 1. kelly type(square or hexagonal) 2. nominal size and overall length 3. upper and lower connection
Drill pipe is used in the drilling. Its a major drilling component which connects rotary system, hoisting system, circulation system with drill collar and bit. Through it the rotary table drives the bit rotation, hook drives bit up and down and drill fluid flows to the well bottom forming circle to make the bit breaks rock and reaches continuous drilling. 1) Certificate: API 5DP, API Q1, ISO 9001, ISO 29001 2) Size Range: 60.32-168.28mm 3) OD: 2 3/8, 2 7/8, 3 1/2, 4, 4 1/2, 5, 5 1/2, 6 5/8 4) Grade: G105, S135, X95, E75 5) Wall Thickness: (0.25-0.50) inch or (6.45-12.70) mm 6) Length: R1: 6.10-7.01m; R2: 8.84-9.75m; R3: 12.19-13.72m 7) Upset style: IU, EU, IEU
A. Slick Drill Collar Note: Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. The Drill collar are manufactured strictly from API Spec7-1 and SY5411 standard. B. Spiral Drill Collar Note: Spiral drill collar is used to reduce contact area with hole so as to avoid efficiently bit sticking from diffirential pressure. The drill collars are manufactired strictly according to API Spec7-1 and Standard SY5144 C. Spiral Drill Collar With Elevator Groove And Slip Groove Note: Elevator groove and slip groove made on box thread face of slick drill collar or spiral drill collar can be used as lifting sub and safety slip when trip out. The technical parameters for elevator groove and slip groove is as per API SPEC7-1. Hardbanding is optional at customersâ?? requests. D. Non-magnetic Drill Collar The as cold rooled finish on both ID and OD surface with unique technical process strengthen the structure and ensures the tools with optimal resistance to stress,corrosion,cracking and the mechanical performance is greatly enganced.
China supplier model ddz center latch elevators are suitable for handling 18 degree taper shoulder drill pipe, drilling tools and etc. The elevators are designed and manufactured according to api spec 8c-specification for drilling and production hoisting equipment. Model: dd, ddz, cd, cdz, Pipe size range: 2 3/8"-5 1/2" Load capacity: 100tons-350tons
Ddz center latch elevator Product description China supplier model ddz center latch elevators are suitable for handling 18â°taper shoulder drill pipe, drilling tools and etc. The elevators are designed and manufactured according to api spec 8c-specification for drilling and production hoisting equipment.
Specifications Single joint elevator 1. Type:sj 2. Api spec 8c iso9001: 2008 3. Hoisting tools for handling casing. Single joint elevator Single joint elevators are designed and manufactured according to api spec 8a-specification for drilling and production hoisting equipment. The elevators are hoisting tools for handling casing and etc in oil and gas field. Model: sj, sp, sjx Size: 3 1/2"-14" Load: 5tons, 6tons
