Unatex air compressor 0220701005 0220610001 oil filter 0220101021 Air filter.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Product model: KY911 wear-resistant flux cored wire Product specifications: 1.2mm 1.6mm 15kg / box Post-weld hardness: HRC 65-70° Scope of application: It is suitable for high hardness and hard surface treatment of parts with high wear and high impact. It is suitable for surfacing welding with strong abrasion resistance. It has wide application range and high quality. Metal composition (%): C 3.00-6.00; Mn 2.00-3.00; B 5.00-8.00; Cr 20.00-25.00; Ni 2.00-3.00; Mo 2.00-3.00 Precautions: 1. Adopt DC reverse connection; 2. When welding, the flow rate of CO2 gas should be 20~25L/min; 3. The dry elongation of the wire should be controlled within the range of 15~25mm; 4. The temperature between the channels is recommended to be kept at around 300 °C; 5. Before welding, the weldment must be cleaned of rust, oil, moisture and other impurities. Precautions:   Precautions for use: The wear-resistant solder layer should generally be surfacing 1 layer. Because the number of layers is too much, the surfacing layer becomes brittle due to too high hardness and is easily broken after collision. Due to the high hardness, the welding wire has a cracking sound during the welding, and a small crack occurs, which is a normal phenomenon and does not fall off, and does not affect the service life.   We are a real wear-resistant welding consumables production factory, with a complete production process and inspection process, to provide you with high quality and cost-effective wear-resistant welding consumables.
A demulsifier is a surfactant that breaks up an emulsion. The demulsifier mainly destroys the emulsion by partially replacing the role of the stable film. Used as a dehydrating agent, it can remove the water in crude oil and heavy oil, so that the water content can meet the requirements; it can reduce the viscosity of crude oil when used in oil wells, so that the oil wells will not be blocked. It is obtained by polymerization of fatty alcohol, propylene oxide and ethylene oxide. Soluble in water, light yellow or milky white viscous liquid. Soap smell. Freezing point 25 ~ 40 ºC. Hydroxyl value 60 mg potassium hydroxide/g. , the aqueous solution is milky white.
Description: PVC Anti-Slip Standard S Mat The mat is very popular in the market. The materials of mat make it durable and strong. The mats are known for their ability to trap dirt and water, making them a popular choice for use in a variety of places. S mats are commonly used in high-traffic areas such as swimming pool, bathroom and other wet areas where they can help prevent slipping and falling by providing a non-slip surface. Parameters: 1.Thickness: 5mm/customized 2.Size: 1.2m*15m/customized 3.Weight: 48.6kgs/roll Advantages: 1.Good quality: The quality of our products is very stable, due to many years of production experience. 2.Easy to clean and maintain: Just simply rinse or wipe with water and mild detergent. 3.Durability: This kind of material is very durable, which can use for a long time and no frequent replacement.
The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Made in Korea [4 Main Ingredients] Microbiome (294,000 ppm of German Brewer yeast extract): scalp care and prevention of hair loss Strawberry calyx extract: Prevention of hair loss Triple Green Barrier: Sensitive scalp soothing and moisturizing BiomCure-185TM: Soothing scalp and relieving redness [4 additional ingredients for hair loss relief] The four ingredients, reported by the Ministry of Food and Drug Safety in Korea, help strengthen the weak and sensitive scalp and elasticize the hair roots. 1. CAFFEINE 2. NIACINAMIDE 3. PANTHENOL 4. SALICYLIC ACID [32 natural extracts] Brewer yeast, wild strawberry leaf, kelp, seaweed, grapes, persimmon tree leaf, tiger root, coffee beans, safflower, herbaceous fruit, chestnut bark, green tea, sophora root, lavender, black beans, black sesame, black rice, green beans, Mexican seed, wheat, rice, red beans, medicinal herbs, stone beans, yulmu, quinoa seeds, camellia seed oil, oat cannell, argan cannell oil, noni fruit, Yeoju fruit, okra fruit [A fresh wood-based scent] Top Note: Pink Berry, Raspberry Middle Note: Peony, Rose, Camellia, Heliotrope, Base Note: Musk, Vanilla, Cedarwood
Cosmetic products like pink moisturizing beauty cream bar, sunscreen lotions, rosewater, soaps, hair oils, serums, bath salts, shampoo, conditioner, body scrubs, face wash, body wash and much more....
Herbal powders, banana powder, carrot powder, herbal hair oil, face pack powder, beetroot powder, butterfly pea powder, ginger tea powder, masala tea powder .Manufacturing and export
Incense sticks, dhoop batti, dhoop cones, dhoop sticks, poojan samagri, agarbatti, edible oils, packaged tea, mosquito coils, natural hair colour, heena & soya chunks.
0896364002879 Olaplex No.0 Intensive Bond Building Treatment 155ml 0896364002435 Olaplex No 5 Bond Maintenance Conditioner 250ml 0896364002671 Olaplex No.7 Bonding Oil 30ml 0896364002428 Olaplex No.4 Bond Maintenance Shampoo 250ml 0896364002602 Olaplex No.6 Bond Smoother 100ml 0896364002350 Olaplex No.3 Hair Perfector 100ml 0896364002930 Olaplex No.8 Bond Intense Moisture Mask 100ml 0850018802284 Olaplex No.9 Bond Protector Nourishing Hair Serum 90ml 0896364002336 Olaplex No.1 Bond Multiplier 100ml 0896364002343 Olaplex No.2 Bond Perfector 100ml 0896364002374 Olaplex Traveling Stylist Kit 0896364002367 Olaplex Salon Intro Kit
0896364002879 No.0 Intensive Bond Building Treatment 155ml 0896364002435 No.5 Bond Maintenance Conditioner 250ml 0896364002671 No.7 Bonding Oil 30ml 0896364002428 No.4 Bond Maintenance Shampoo 250ml 0896364002602 No.6 Bond Smoother 100ml 0896364002350 No.3 Hair Perfector 100ml 0896364002930 No.8 Bond Intense Moisture Mask 100ml 0850018802284 No.9 Bond Protector Nourishing Hair Serum 90ml 0896364002336 No.1 Bond Multiplier 100ml 0896364002343 No.2 Bond Perfector 100ml 0896364002374 Traveling Stylist Kit 0896364002367 Salon Intro Kit
100% duty cycle operation; Energy-efficient performance; Advanced control solution; Service maintenance reminder; Lower oil change costs.
100% duty cycle operation; Energy-efficient performance; Advanced control solution; Service maintenance reminder; Lower oil change costs.
100% duty cycle operation; Energy-efficient performance; Advanced control solution; Service maintenance reminder; Lower oil change costs.
Background Impact strength is a crucial parameter for assessing the quality of plastic films. It plays a significant role in determining a film's ability to withstand external forces and impacts, which can directly affect its cost and performance, especially during transportation and handling. The Falling Dart Impact Test is a traditional and widely accepted method for measuring the impact strength of plastic films. This test helps determine the energy required to cause a plastic film to fail under controlled conditions where a free-falling dart strikes the material's surface. The result of this test provides valuable information about the material's ability to resist impact and can help manufacturers and quality control teams make informed decisions about material selection, product design, and packaging to ensure the durability and integrity of plastic films in various applications. Application FDT-01 Falling Dart Impact Tester is used to measure he resistance performance of plastic films, sheets, and composite films, foils, paper, with less than 1mm thickness. This test indicates material ability to resist external force. The FDT-01 Falling Dart Impact Tester is a specialized testing device designed for measuring the resistance performance of various materials, such as plastic films, sheets, composite films, foils, and paper, provided they are less than 1mm thick. This test is conducted to assess the material's ability to withstand external forces. Standards ASTM D1709, ISO 7765-1, JIS K7124-1, GB/T 9639.1 Technical Features FDT-01 Falling Dart Impact Tester is a PLC controlled unit (industrial level stable) and HMI touch screen operated. Every part of the dart assembly and releasing mechanism are made strictly to standard. By the embedded test program, user just needs to perform test and increase or reduce the weights according to the set parameters. Then after enough number of Fail/Non-Fail tests, the system automatically gives impact result, which is without being manually calculated again. 1. PLC Control and Touch Screen Operation offer stability, ease of use and efficient operation. 2. Two Test Methods (A and B) (Method B is optional) 3. Both Test Button and Foot Switch Are Equipped for safe and easy operation 4. Observation Light helps check sample status during clamping 5. Display of Test Results in Grams and Joules 6. Electromagnetic Suspension and Automatic Falling 7. Sample Pneumatic Clamping 8. Dot Matrix Micro-Printer Embedded for data output 9. Professional Software is Provided as an Optional part Main Parameters Test Method Method A or Method B (optional) Test Range Method A: 50~2000g/Method B: 300~2000g Dart Diameter Method A: 38�±1mm/Method B: 50�±1mm Impact Height 660mm/1500mm Accuracy 0.1g (0.1J) Clamp Pneumatic Clamp Gas Supply 0.6 MPa �¦8 mm PU Tubing Specimen Size > 150 mm x 150 mm Power Supply AC 110~220V 50Hz Dimension Method A: 500*450*1200 mm (LWH)/Method B: 500*450*2200 mm (LWH)
Shale Shaker Shale shaker manual is the first stage processing equipment in solids control system, can be divided into linear motion shale shaker and balanced elliptical shale shaker. shale shaker plays a key role in the whole solids control equipment system, mainly separate out the particles which are larger than 75um. As one of the most professional shale shaker manufacturers and shale shaker suppliers in China, BZ can provide linear motion single or double deck shaker, dual motion shaker, high frequency shale shakers and vacuum drying shale shaker according to user requirements. BZ shale shaker design has following characteristics: humanized-operation design, adjustable exciting force, adjustable deck Angle, compact structure and high cost performance, widely used in oil & gas drilling, coal methane exploration, horizontal directional drilling, oil sludge treatment, mining mud recycling, etc. Contact our drilling solids control equipment manufacturer for the latest shale shakers price! Shale Shaker Features & Benefits Adjustable G force up to 7.5G, capable of handling high viscosity and high specific gravity mud. Heat treatment on shaker deck for High G force running. Shaker deck bottom made by stainless steel for longer service life. Shaker deck angle can be adjusted while working. Durable rubber sealing, long service life, low abrasion and noise. Weir or top feed design for different needs. Easy and quick screen replacement by wedge type compaction. Italy Oli or USA Martin brand motor. Explosion proof standard: CNEX; IECEX; UL, ATEX; CU-TR, etc. Electrical components: SIEMENS, Schneider, ABB Brand. Shale Shaker Specifications Model BZS752 BZS583 BZS584 BZS585 BZS585S BZS586D Vibration mode Liner Motion Liner Motion Liner Motion Liner Motion Double Track Liner Motion Max Capacity 60m³/h (220GPM) 120m³/h (440GPM) 140m³/h (513GPM) 165m³/h (605GPM) 165m³/h (605GPM) 140m³/h (513GPM) Motor Power 2x0.8kW 2x2.2kW 2x2.2kW 2x2.2kW 2x2.2kW+1.3kW 2x2.2kW G Force 7.5G Adjustable Screen Size(mm) 750x900 585-1165 Up: 750x 900x2pcs Down: 585-1165x4pcs Screen Qty(pcs) 2 3 4 5 5 6 Screen Area 1.35-15ft² 2.04-22ft² 2.73-29ft² 3.41-37ft² 3.41-37ft² 4.08-44ft² Screen Type Frame/pretensioned Deck Angle 0°~+2° -1°~+5° -1°~+4° -1°~+5° Vibration Amplitude 4.5~6.0mm 4.5~6.3mm Noise(db)
8 Rows Cultivator Fertilizing Machine discharge is controlled by microcomputer throughout the whole process with high precise. Cultivators are designed to disturb the soil in careful patterns, sparing the crop plants but disrupting the weeds The Yongxiang 350L Hopper Fertilizing Machine is perfectly suited for soybean and corn drill sowing fertilizer . Support customization of your needs according to your tracktor power and farmland conditions. Through the intelligent precision fertilization electric drive control system, control tablet APP control, digital intelligent input, radar speed measurement synchronous control, detection automatic variable adjustment, pneumatic forced fertilization. Electronic sensors monitor empty boxes, leaks, blockages, and alarm devices. The fertlizer machine has high reliability and stability. Fertilizer discharge is controlled by microcomputer throughout the whole process with high precise. It can save fertilizer and labor, not burning seedlings, reducing weeds, less pollution, anti-fall, easy to operate, increase yield and income, etc. Cultivators are usually either self-propelled or drawn as an attachment behind either a four-wheel tracto. For four-wheel tractors they are usually attached by means of a there point hitch.
A&S Construction Machinery Co., Ltd. supplies all types of controllers. All the brands of controllers we can provide: CAT controllers, KOMATSU controllers, JOHN DEERE controllers, SANY controllers, XCMG controllers, VOLVO controllers, HITACHI controllers, SUMITOMO controllers, LIEBHERR controllers, DOOSAN controllers, CASE controllers, BOBCAT controllers, KUBOTA controllers, YANMAR controllers, HYUNDAI controllers, DAEWOO controllers, etc.. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.. Contact Us A&S Construction Machinery Co., Ltd.
New energy power prefabricated cabins, drilling rig camping houses, special containers, modular buildings, energy storage containers, container accessories, workover rigs, drilling rigs, mud non landing solid control equipment, oil and water tanks.
Hydroxyethyl Cellulose ZONEHIBTM HEC is a natural polymer material cellulose as raw material, which reacts with sodium hydroxide to form basic cellulose colloid, and then the ethylene oxide and other chemicals are added into the reaction to get etherification. By controlling the production parameters, the Hydroxyethyl cellulose is produced. It is a white or light yellow powder, non-toxic, tasteless, can be quickly dissolved into hot or cool water, insoluble in general organic solvent, with excellent character of thickening, dispersing, emulsifying, adhesion, stabilizing, water retention and film forming. Also can be used as a protective colloid in some products. Paints & Coatings: HEC can be used in water-based coatings with excellent emulsification, dispersion speed, stability and water retention, which can help paints and coatings achieve better rheological properties at different shear rates, giving your products smooth leveling, good anti-flaking and anti-slip properties. Daily Chemicals: HEC is an effective film former, binder, thickener, stabilizer and dispersant in shampoo, hair spray, neutralizer, conditioner and cosmetics. Its thickening and protective colloid properties can be used in liquid detergent and solid detergent industries. Environmentally Friendly Materials: Hydroxyethyl Cellulose (HEC) is naturally degradable and environmentally friendly. It is safe to use with no irritation to human skin, though it's important to avoid inhalation of dust and direct contact with eyes. Due to its versatility and wide range of applications, HEC holds significant value in both industrial and everyday contexts. Oil and Gas Exploration: Hydroxyethyl Cellulose (HEC) is a critical component used as a viscosity enhancer in drilling fluids, playing a vital role in oil and gas exploration. Pharmaceuticals: Hydroxyethyl Cellulose (HEC) is used in pharmaceuticals as an adhesive, film coating, and in controlled release formulations. Food: HEC plays an important role in the food industry as a thickener and stabilizer for various foods. It is commonly used in sauces, dressings, puddings and baked fillings to achieve the desired viscosity and texture. Paper: HEC can be used as a glazing agent for paper and cardboard and a protective glue for ink. It has the advantage of not being affected by the size of the paper during printing and can print high-quality images. At the same time, due to its low surface permeability and high gloss, it can also reduce costs.
