Wanted : Base Oil Sn 150 And Sn 500 Suppliers and Manufacturers

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

During last decade Guar has immerged as an important industrial raw material and Produced by man for thousands of years. India has been the single largest producer and exporter of Guar gum accounting for more than 80 percent of the global output and trade. Guar has now assumed a larger role among the domesticated plants due to its unique functional properties. India Ranks First in the production of guar which is grown in the North Western part of the Country which mainly includes the states of Rajasthan, Gujarat, Haryana and Punjab. Other main countries are Pakistan, U.S.A and Brazil The by-product of Guar Gum industry consisting of the outer seed coat and germ material is called guar meal. The Guar meal after gum Extraction is a potential source of protein and contains about 42% crude protein which is one and a half times more than the level of protein in guar seed. The protein content in guar meal is well comparable with that of oil cakes. It is used as a feed for livestock including poultry. Guar meal contains two deleterious factors i.e. residual guar gum and trypsin inhibitor, Toasting of Guar Gum improves its nutritive value in chicks. Toasted guar Meal can be used in limited quantity i.e. Up to 10% in Poultry diet. However it can replace groundnut cake by almost 100% in animal feeds. Guar Gum (Galactomanan) is a high molecular weight carbohydrate polymer made up of a large number of mannose and galactose unit linked together. The crude Guar Gum is a greyish white powder 90% of which dissolves in water. It is non ionic polysaccharide based on the milled endosperm of the guar bean whose average. Composition is: Hydrocolloid: 23% Fats: 40% Proteins: 34% The most important property of the Guar is its ability to hydrate rapidly in cold water to attain a very high viscosity at relatively low concentrations. Its specific colloidal nature gives the solution an excellent thickening power which is 6 to10 times thicker than that obtained from starch. It is stable over a wide range of PH and it also improves the flow ability and pump ability of the fluid. It is a superior friction loss reducing agent.

Base oil can be obtained from oil or non-oil sources. virgin base oil obtained from crude oil .Since most of the base oil used in the production of lubricants obtained from oil resources. base oil properties of the oil obtained is dependent on the type of crude oil and refining operations. base oil is chemical components during the refining process of crude oil from which it obtained, to inherit. Since crude oil containing different combinations such as paraffinic hydrocarbons, naphthenic and aromatic sulfur compounds are also, base oil are also made up of these compounds. base oil composition comprising a major effect on the properties of spent oils, paraffinic compounds, naphthenic and aromatic

EXTRUPLUS P1 (POTATO BASED) is a Physically modified, Clean-Label, Gluten free, Plant based, Vegan and Non GMO starch. EXTRUPLUS P1 (POTATO BASED) is used as a perfect additive for Extruded & Oil Fried Snacks, Papad , Pasta and Noodles etc. EXTRUPLUS P1 (POTATO BASED) has no preservative and no Mono sodium Glutamate.

EXTRUPLUS P2 (POTATO BASED) is a Physically modified, Clean-Label, Gluten free, Plant based, Vegan and Non GMO starch. EXTRUPLUS P1 (POTATO BASED) is used as a perfect additive for Extruded & Oil Fried Snacks, Papad , Pasta and Noodles etc. EXTRUPLUS P1 (POTATO BASED) has no preservative and no Mono sodium Glutamate.

EXTRUPLUS P2 (POTATO BASED) is a Physically modified, Clean-Label, Gluten free, Plant based, Vegan and Non GMO starch. EXTRUPLUS P1 (POTATO BASED) is used as a perfect additive for Extruded & Oil Fried Snacks, Papad , Pasta and Noodles etc. EXTRUPLUS P1 (POTATO BASED) has no preservative and no Mono sodium Glutamate.

EXTRUPLUS P1 (POTATO BASED) is a Physically modified, Clean-Label, Gluten free, Plant based, Vegan and Non GMO starch. EXTRUPLUS P1 (POTATO BASED) is used as a perfect additive for Extruded & Oil Fried Snacks, Papad , Pasta and Noodles etc. EXTRUPLUS P1 (POTATO BASED) has no preservative and no Mono sodium Glutamate.

EXTRUPLUS P1 (POTATO BASED) is a Physically modified, Clean-Label, Gluten free, Plant based, Vegan and Non GMO starch. EXTRUPLUS P1 (POTATO BASED) is used as a perfect additive for Extruded & Oil Fried Snacks, Papad , Pasta and Noodles etc. EXTRUPLUS P1 (POTATO BASED) has no preservative and no Mono sodium Glutamate. FEATURES AND BENEFITS: ï?· Helps to reduce cooking time. ï?· Reducing oil consumption. ï?· Improves Crispiness ï?· Improves Expansion & Volume ï?· Improves texture. ï?· Enhance product's flavor. ï?· 100% Natural and 100% vegetarian product APPLICATION: *EXTRUPLUS P1(POTATO BASED) can be used in all type of extruded products like corn puffs, veggie straw snacks, pork rinds, cheese snacks (puffs and curls), Tortilla/Tostada Chips. *EXTRUPLUS P1(POTATO BASED) is also suitable for Bajji Bonda Mix. *EXTRUPLUS P1(POTATO BASED) can be applied for Pasta and Noodles. *Replace 2-5 % of rice flour with EXTRUPLUS P1(POTATO BASED) and add at the time of blending, after adding all raw materials. DOSAGE For excellent results, use 2-5% EXTRUPLUS P1(POTATO BASED) of total batch size.

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Foodix- Offering Instant Mix for Murukku. One of the Most wanted Indian Snacks and widely prepared when the festively time Like Diwali. Preparation 1. Empty the contents of this pack and mix it with 2 cups (Approx. 300ml) of water. Then add 25g of butter or two tablespoons of oil (30 ml) and make it into a dough.2. Heat oil in a pan3. Insert the dough into the mould and press the mould to make spirals either on a cloth, butter paper, foil or flat hold ladle.4. Place the ladle in the oil or remove the Murukku and drop gently in the hot oil. Fry until golden brown and crisp.5. Drain the fried MURUKKU on the kitchen tissue to remove excess oil. Cool them completely. Store them in an airtight container for delicious Murukku. Can be used for preparing Spicy/Sweet Murukku. Add chilli powder/ sugar as per your preference Serving size This pack gives 50 pieces of Murukku (6 cm diameter)

ChikMat P2 is a Vegan, Gluten-Free, Plant-based and Non-GMO starch. ChikMat P21 is used as an excellent additive or ingredient for Crispy oil fried vegetarian and non-vegetarian products. ChikMat P2 will provide structure, tenderness & binding power in baking. It even gives excellent crispiness by better even coating and with low oil absorption. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).

ChikMat P2 is a Vegan, Gluten-Free, Plant-based and Non-GMO starch. ChikMat P2 is used as an excellent additive or ingredient for Crispy oil fried vegetarian and non-vegetarian products. ChikMat P2 will provide structure, tenderness & binding power in baking. It even gives excellent crispiness by better even coating and with low oil absorption. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).

ChikMat P1 is a Vegan, Gluten-Free, Plant-based and Non-GMO starch. ChikMat P1 is used as an excellent additive or ingredient for Crispy oil fried vegetarian and non-vegetarian products. ChikMat P1 will provide structure, tenderness & binding power in baking. It even gives excellent crispiness by better even coating and with low oil absorption. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).

We are exporter of Arabic Gum Or (Acacia Gum). Organic Gum Arabic (Acacia) is an emulsifier for flavor oils and essential oils, making them stable in water-based compounds. A 30/70 ratio of gum to water is recommended as the best starting point for a Gum Arabic solution. It can be mixed at a 6/1 ratio of gum to oil. It can be used in cosmetics, baking, and as a fiber supplement. Organic Gum Arabic (Acacia) is vegan, kosher, and gluten-free. The Sudanese Organic Gum Arabic Acacia Senegal Heshab is the best in quality all over the world.

Description A handmade soap made from pure natural ingredients helps to keep your skin fresh and smooth. Coconut oil handmade soap helps detoxicate, remove dead skin cells, moisturize skin, etc. It is made entirely by hand with natural, organic materials based on an ancient recipe very good for your health. It awakens your senses and makes you feel ready to embark on any adventures, both mental and physical, delivering true satisfaction of love, joy, and peace. Ingredients Virgin coconut oil, sorbitol, glycerine, base soap, water. Gluten free. Usages For facial wash: Wet your hands and rub the soap into a lather to massage over your face, then rinse with water. For bathing: Apply the soap to your body and massage, then rinse with water.