Commodity: Canola (Rapeseed) Oil (RCAO). Type: Refined, Winterized, Deodorized, And Bleached. Quality: Fit for human consumption, free from foreign matter, any other oil or animal fats. Color (51/4 Lovibond): Red 3 maximum, light yellow, clear and transparent. Odor: Characteristic taste and no odor. Visibility: Without any deposition and blurriness. Taste: Neutral, without an artificial taste, free from rancidity or any strange or bad taste and smell. Physical and Chemical Analysis Values: (The values may vary within standards) Free Fatty Acid, % m/m Oleic Acid: 0,3 maximum. Acid Number, mg KOH/g: 0,6 maximum. Peroxide Value, meq O2/kg: 10,0 maximum. Iodine Value, WIJS: 105 - 126 Moisture and Volatile Matter, %: 0,2 maximum. Saponification Value, mg KOH/g: 182 - 193 Unsaponifiable Substances, g/kg: 2,0 maximum. Insoluble Substances in Ether, %: 0,05 maximum. Refractive Index, at 40oC: 1,465 - 1,467 Specific Gravity, g at 20oC: 0,914 - 0,920 Soap Content, %: 0,005 maximum. Halphen Test: Negative. Mineral Oil Test: Negative. Sesame Oil Test: Negative. Cold Test, 5,5 hours at 0oC: Clear. Heavy Metal Analysis: Iron (Fe): 1,5 ppm maximum. Copper (Cu): 0,1 ppm maximum. Lead (Pb): 0,1 ppm maximum. Arsenic (As): 0,1 ppm maximum. Nutrition Facts in 100 gram: Energy Value: 900 kcal / 3700 kjoule Total Fats: 100 g Saturated Fats: 8 g Monounsaturated Fats: 65 g Polyunsaturated Fats: 27 g Trans Fat: 0 g Protein: 0 g Carbohydrate: 0 g Sodium: 0 g Cholesterol: 0 g
The health benefits of Lavandin Essential Oil can be attributed to its properties as an antidepressant, antiseptic, analgesic, cicatrisant, expectorant, nervine, and vulnerary substance. The Lavandin, plant from which this essential oil is obtained, is not a natural plant in the true sense because it was born as a result of the hybridization of two plants with the scientific names Lavandula Angustifolia and Lavandula Latifolia. That is why Lavandin is scientifically known as Lavandula Hybrida and Lavandula Hortensis. The aroma and medicinal properties of Lavandin are quite similar to those of Lavender, but they are more intense and sharp since it is a hybrid. The main components of this oil are Lavandulol, Linalool, Linalyl Acetate, Camphor, Cineole, Caryophyllene, Camphene, Dipentene, Limonene, Ocimene, and Terpinene. Lavandin oil boosts self-esteem, confidence, hope, and mental strength, while efficiently fighting depression. This can be very helpful to drive away depression for those who are suffering from depression due to a failure in their career or personal relationships, insecurity, loneliness, stagnation, someoneâ??s death, or for any other reason. This also relieves anxiety. As an antidepressant, it can be systematically administered to patients with acute depression who are undergoing rehabilitation
COMMODITIY : OMAN LIGHT CRUDE OIL ORIGIN : OMAN Quantity per Month: 6,000,000 Barrels Contract : 12 months Roll's extensions Price : Gulf Platt minus 4.50$ per bbl Inspection: Inspection document must be issued by SGS, Or similar International Inspection companies, like CHEOCHEM. Payment Terms : Payment by DLC MT700 Verbiage (100% sight, Irrevocable and Confirmed), valid for 365 days to be issued by / from a credit worthy Bank in Euro currency in Favour of the Seller. Packing : Bulk Delivery : 30 days from LC
Canola / Rapeseed Oil Origin: Indonesia, Thailand, USA, Ukraine, South Africa & Global Payment through SBLC/LC/DLC. Bulk quantities are available. Final SPA to be done between end-seller & end-buyer.
We supply Light Cycle OIl (LCO) Origin: Kazakhstan First Lift: 50,000 Metric Tonnes Contract: up to 100,000 MT/month x 12 months CIF Price: USD $270/MT LCO, a by-product of the fluid catalytic cracking (FCC) process in a petroleum refinery, can be used as a blendstock for the production of diesel and jet fuels. Light Cycle Oil (LCO) is the diesel boiling range material, which is produced in addition to gas and petrol in the Fluid Catalytic Cracking Unit (FCCU). The optimised partial conversion hydrocracking process provides an effective and flexible process to process LCO into desired products such as very-low sulphur diesel and high-octane high-aromatics naphtha.
Wholesale Light cycle oil Light Cycle Oil (LCO) is a secondary liquid product derived from the fluid catalytic cracking (FCC) process in refineries. This process breaks down larger hydrocarbon molecules from heavy gas oils into smaller, more valuable products like gasoline and diesel. LCO typically sits between diesel and heavy gas oil in terms of boiling range and weight. Primary Characteristics: Appearance: Typically amber to dark brown liquid. Odor: Characteristic petroleum smell. Density: Intermediate, falling between lighter distillates and heavier oils. Sulfur Content: Can vary based on the feedstock and refining process, but often higher than diesel and gasoline. Applications: Blending Component: Frequently blended into diesel fuel to enhance volume, though this requires treating to meet emissions standards.
Light Cycle Oil, also known as LCO, is a refined product derived from the processing of crude oil. It has a higher density and boiling point range compared to diesel fuel but lower than heavy fuel oil. LCO is commonly used as a feedstock for fluid catalytic cracking units (FCCU) and is also used as a blend component for marine fuels.
Chamomile oil has excellent calming properties, chamomile is very effective for irritation, impatience and feeling disagreeable, and has great value in treating menstrual and menopausal problems, chamomile is also effective on the skin, not only to sooth and calm, but to heal and for tissue regeneration. Chamomile essential oil has a sweet, straw-like fragrance, is dark blue in color and its viscosity is medium. Chamomile oil is mostly cultivated in hungary, egypt, eastern europe and france, while roman chamomile is cultivated in germany, france, spain, italy, morocco and france.
Geranium essential oil is antibacterial, antispasmodic, anti-tumorial, adrenal support, anti-inflammatory, astringent, antibacterial, anti-fungal, haemostatic (stops bleeding), and general tonic, geranium was used by the ancestors as a remedy for wounds, tumours, and skin care. With antiseptic and anti-inflammatory, geranium essential oil is indicated in acne, dermatitis, eczema, wounds that are weeping and will not heal, bruises, grazes and cuts, light burns, haemorrhoids, varicose veins, and ulcers, sore throats, tonsillitis, and neuralgia.
Lavender oil is an essential oil obtained by distillation from the flower spikes of certain species of lavender. Our lavender essential oil is produced from flowers growing in higher elevations of Bulgaria. The oil has a fresh, soft and sweet aroma. Lavender is indigenous to mountainous regions of the Mediterranean countries and the black sea, gowning best in the poor, well-drained soils. Lavender oil, which has long been used in the production of perfume, can also be used in aromatherapy. It has a calming and regenerating effect over the human body. Lavender oil can be used as an antiseptic and pain reliever to be applied to minor burns and insect bites and stings.
This cooling and refreshing essential oil is used in aromatherapy to stimulate the mind, increase mental agility and to increase focus, while cooling the skin, reducing redness and calming irritation and itchiness. It furthermore helps to ease spastic colon, migraine, headaches, sinus and chest congestion and boosts the digestive system. Peppermint oil has a fresh, sharp, menthol smell, is clear to pale yellow in color and watery in viscosity.
Although pine oil can cause allergic reactions, it is very useful to relieve mental, physical, while having a cleansing and clearing effect on a room. Even though it can be used in cystitis, hepatitis and prostate problems, as well as to improve circulation and to relieve rheumatism, gout, sciatica and arthritis, it should be done so with care due to the sensitizing nature of this oil. Oil properties Pine oil has a fresh forest smell, is pale yellow in color and watery in viscosity.
Rose absolute oil, Rosa damascena, is known best for its sensuous and intense sweet and floral fragrance. Bulgarian rose is suitable for all skin types and is a cell rejuvenator, an antiseptic, and a anti-inflammatory. Used in skin creams and lotions to soothe and heal various skin conditions, cuts, burns and to reduce swelling. Can be inhaled by asthmatics, and it relieves a variety of female problems including menstrual cramps and pms symptoms. Sniffing the oil or using rose as a massage oil has been suggested to reverse impotency, but it's more likely to be used by women to lessen moodiness during menopause. The scent is definitely an aphrodisiac and is used to relieve stress and depression.
Salvia essential oil ( or sage essential oil) is great for relieving grief and quickening the senses, while stimulating the lymphatic system and helping with female problems, such as sterility and menopausal problems and on the skin it not only helps healing but also to reduce pore size. Oil properties Salvia oil has a sharp, herbal smell, and is watery in viscosity. Origin of salvia oil It is an evergreen perennial herb that can grow up to about 60cm ( 2 feet) high with a woody base, soft grey-green oval leaves and a mass of blue or violet flowers. The Chinese believed that it cured sterility, while the romans believed it cured just about everything.
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 â?? iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
Technical Data Sheet Property Average Value Gravity@15.6oc : 0.859 Max SPI: 33.45 Sulphur: 1.2-1.5 Max Water & Sediment Content: 0.2 Max Water Content: 0.1 Max Salt Content: 8 Max Carbon Residue: 4 Max Reid Vapour Pressure: 0 Pour Point: 0.35 Ash: 0 Asphalt : 1 Max ASTM Stabilized Gravity: Degree 3.7 Recovery @50oc: 0.8 Min @100oc: 8 @200oc: 28 @250oc: 37 @300oc: 47 Total Distillate: 47 Total Residue: 2.5Max
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO). There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process. It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
Crude degummed rapeseed oil(din51605) Density(15 oc) kg/m³ 900-930 din en iso 12185 Flash point p.-m oc min. 220 din en iso 2719 Cinematic viscosity(40 oc) mm²/s max. 36, 0 din en iso 3104 Oxid ash content % (m/m) max. 0, 01 din en iso 6245 Water content k.-f. Mg/kg max. 750 din en iso 12937 Flaxi tank