Instant Tempura Batter Mix is an Instant food product which is used preparing crisp fried tempura snacks. Instant Tempura Batter Mix contains physically modified starch specifically suitable for providing light and crispy coating. It also provides significant golden colour appearance to the product. Instant Tempura Batter Mix can be used for making Tempura Prawn/Shrimp, Tempura Squid, Tempura Kakiage (Mixed vegetable tempura), Tempura Chicken, Tempura fish, etc.
Make 3 equal portions of Crispy Fry Mix of this pack. Dissolve one portion in 35ml (Approx 4 table spoon) of water. Coat a piece of cleaned chicken in dry mix powder. Dip the coated chicken piece in the batter until evenly wet Again roll the chicken piece in dry mix powder Fry all the coated pieces in hot oil until it turns golden brown color. Crispy & Crunchy Chicken is ready to serve with love ! This pack is sufficient for 250g of Chicken/Meat/Fish.
Powerful lubricating cum penetrating agent with binding property for Linen and polyester yarns for direct warp and sectional warp. The primary purpose of the product is to increase the abrasion resistance of sized warp yarn. Wax and tallow base softeners and lubricants are hydrophobic in nature. Angelube-CE100 contains 100% hydrophilic heads. Its provides penetrating power and also cold water soluble. Its easy biodegradable and not affect the binding property of the size mix. When use tallow and wax in storage it wont spread out evenly in size mix. It causes formation of uneven film property in yarn. This is the main reason for the weaving efficiency fluctuation. Not like that Angelube-CE100 has fully emulsifying property and its act as excellent leveling agent. It provides even film property to whole size mix. It directly reduce warp breakages and improve productivity in fabric formation.
THINTEXOTM-Modified Starch Low viscosity modified starch for warp yarn sizing SPECIFICATIONS Appearance : off white to cream colour fine free flowing powder Solubility : Insoluble in cold water pH value( 15 % aqu. soln) : 5 to 7 Viscosity of 15% soln : Max 60 cPs (Brookfield viscometer ( Spl.2 , rpm:100 @ 80oc) LVDV II+ pro) Moisture content (w/w) : Max 13% Ash content (w/w) : Max 0.5% Sieve Retention (60 Mesh) : Max 1% Bulk density (gm/ml) : 0.45 to 0.55 SPECIAL FEATURES : Constant viscosity. Optimum penetration & film formation. Better flexible film . Easily de sizable product . Warp- break reducer. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY - Stable for one year from the date of manufacture PACKING - Available in 50Kgs Net weight PP Bags with a moisture-proof line inside.
n product. Texture Feature: Light creamy to white color fine free flowing powder, free from rancidity and foreign matter. Specification : S.No Parameters Specifications 01 Appearance Slightly red color, fine powder 02 Solublity In Cold Water Min. 20% 03 pH Value OF 20% Solution 5.0 To 7.0 04 Viscosity Of 20% Solution In Brookfield Lvdvii+pro Viscometer ( Spindle No : 2 , Rpm 100 , Temp 800c) 50 to 150 cPs 05 Moisture Content, (w/w) Max. 13% 06 Bulk Density, Gm/ml 0.55 To 0.7 07 Ash Content Max. 10 % Application : Coat a piece of washed chicken in this dry mix powder. Then dip the coated chicken piece in the batter* until evenly wet. *Batter preparation: Dissolve 50 g instant crispy fry mix in 85 ml of water. Again roll the dipped chicken piece in a dry mix powder. Fry these coated pieces in a hot oil until it turns golden brown color. Note:100 g of instant crispy fry mix is enough for making 250 g of crispy runchy chicken. Storage : Exhibits excellent stability when stored in closed container under cool and dry ventilated place . Avoid direct sun light. Packing : Available in 25Kgs net weight paper bags with moisture proof line inside.
LLDPE Reprocessed Transparent Color For Sales MATERIAL : LLDPE reprocessed transparent color CATEGORY : LLDPE TYPE : Reprocessed GRADE : Transparent color SPECIFICATION : First grade reprocessed LLDPE natural color filled in seperate bags. LLdpe - MFI 0.92 equal to virgin film grade Natural 80MT ORIGIN : New Zealand LOADING WEIGHT : 20 Tons FAS (USD/Ton) : 1000-1200
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
LLDPE Recycled Pellet AAA Plastic Scrap For Sales MATERIAL : LLDPE recycled pellet AAA CATEGORY : LLDPE TYPE : recycled pellet GRADE : AAA SPECIFICATION : LLDPE repro pellet, Natural color, film grade ,regular supply, Malaysia origin ORIGIN : Malaysia LOADING WEIGHT : 27 Tons FOB (USD/Ton): 1100-1400
LLDPE Recycled Pellet AAA Plastic Material For Sales MATERIAL : LLDPE recycled pellet AAA (with PCR certificate) CATEGORY : LLDPE TYPE : Recycled pellet GRADE : AAA (with PCR certificate) SPECIFICATION : LLDPE repro pellet with PCR certificate (Post Consumer Plastic Recycled supplier). Natural color, film grade ,regular supply, Malaysia origin. TDS included. ORIGIN : Malaysia LOADING WEIGHT : 27 Tons FOB (USD/Ton) : 1050-1250
MATERIAL : LDPE/LLDPE RPG CATEGORY : LDPE/LLDPE TYPE : Pellet GRADE : Natural SPECIFICATION : "LDPE/LLDPE RPG(BLOW FILM GRADE, NATURAL) MIN 2X40'HC PER MONTH WITH REGULAR BASE MFI : 0.9 ~ 1.2 TENSILE STRENGTH : 10 ~ 12 MPA ELONGATION : MIN 850% MOISTURE : LESS THAN 0.5%" ORIGIN : Korea LOADING WEIGHT : 23 FOB (USD/Ton) : $950-1150
PET Roll Clear Color Plastic Scrap For Sales MATERIAL : PET Roll Clear Color CATEGORY : PET TYPE : Roll GRADE : Clear Color SPECIFICATION : "Length 3 meter, Diameter 30-50 cm Weight of each Roll: 500-700 kgs The Film Thickness is 23 to 70 micron. Load: 50-54 rolls each 40ft HC container. Deduct 20kg of paper core for each roll" ORIGIN : Germany LOADING WEIGHT : 26 Tons FAS (USD/Ton) : 450-600