Kantha Work Embroidered Double Bed Sheet Suppliers and Manufacturers

I can supply frozen sushi, produced with my own recipe in Thailand. There are several way to use these products: 1/ receive the products to be refreshed, and packed in fresh trays, adding the fresh flesh on the top of the rice balls. The products are: - rice balls 18 grs (packed by 42 units per tray) - california rolls many recipe 20 grs (packed by 30 units per tray) - vegetable maki many recipe 17.5 grs (packed by 45 units petr tray) - rice sheet 85 grs (packed by 4) this products is used to make the fish makis with of cuts 2/ in a final product box wich can be sold to direct consumer by frozen. Nowadays, we have 2 packs: by 10 sushis and by 24 sushis, but it is easy to work on new products matching the requirements of the costumer.

10/S Soft Towel 35 x 55 cms / 50 x 100 cms / 70 x 140 cms with viscose border Weight : 465 gsm . Can be made with higher weight as well Pastal and Medium Shades 12 Pc in a poly bag and then in carton

100% Cotton Natural Shade Bale Packed ..... 6 Side cotton knitted fabric with strap bands

100% Cotton Roving Natural Shade Bale Packed with 6 side Cotton Knitted Fabric covered

Denier 1.2 to 8. Capacity :-300 tons per month. Origin :- Pakistan Cut length: 38mm, 51mm, 64mm, 76mm, and 120mm Colors : 1) Raw white / Black / Green Compressed bales 250kgs

Denier 1.2 to 8. Capacity :-300 tons per month. Origin :- Pakistan Cut length: 38mm, 51mm, 64mm, 76mm, and 120mm Colors : 1) Raw white / Black / Green Compressed bales 250kgs

Denier 1.2 to 8. Capacity :-300 tons per month. Origin :- Pakistan Cut length: 38mm, 51mm, 64mm, 76mm, and 120mm Colors : 1) Raw white / Black / Green Compressed bales 250kgs

100% Cotton OR 30% Poly 70% Cotton Shoddy / Recycled Fibre Capacity :- 50 tons per month. Origin :- Pakistan / Bangladesh Colors : 1) Ecru ( Natural ) / Black / White / Green / Yellow / Navy Compressed bales 180 kgs

100% Cotton OR 30% Poly 70% Cotton Shoddy / Recycled Fibre Capacity :- 50 tons per month. Origin :- Pakistan / Bangladesh Colors : 1) Ecru ( Natural ) / Black / White / Green / Yellow / Navy Compressed bales 180 kgs

USED 100% Wool Sweater cuttings Tag , Button / Zip , Seam removed Sorted Family Colour Wise Packed in Bales 150 - 180 Kgs

USED 100% Wool Sweater cuttings Tag , Button / Zip , Seam removed Sorted Family Colour Wise Packed in Bales 150 - 180 Kgs MOQ 25 Tons of Different colours

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Caustic Soda Flakes Caustic Soda Pearls / Bead / Prill / Granule Caustic Soda solid Molecular formula: NaOH Molecule Weight: 40 H.S code: 28151100 CAS: 1310-73-2 UN number 1823 Dangerous Class 8 We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base Specifications(Caustic Soda Pearls 99%min): 1. Item: STANDARD 2. NaOH: 99% 3. Na2CO3:0.5%max 4. NaCL:0.03%max 5. Fe2O3: 0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Flakes 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.5%max 4. NaCL:0.05%max 5. Fe2O3:0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Solid 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.9%max 4. NaCL:0.15%max 5. Fe2O3: 0.01%max Packing in 200KG net sheet metal drugs.