Overview Walsn Oxygen Analyzer is designed to measure the continuous oxygen concentration in combustion flue gases of boilers and furnaces. Walsn Oxygen Analyzer uses a non-sampling (wet) analysis method. It consists of detecting unit (oxygen probe) and control unit (transmitter). The flue mounted probe has a thermostatically controlled heated Zirconia oxide sensor located at the flue end of the probe. The control unit is designed for use with the Zirconia sensor type oxygen probe. The control unit offers a centralized termination for functions such as an automatic calibration box, external calibration contacts, status relay contacts and analog and serial outputs. Virtually no maintenance is required. Repair can be carried out quickly and simply: the internal components can be withdrawn from the probe and replaced as one unit. The probe will safely operate under start-up conditions for all conventional boiler fuels,provided the fuel ignition temperature is greater than 2003F. Measuring Principle Walsn Oxygen Analyzer contains a zirconia oxide sensing element, comprising a thimble-shaped zirconia cell fitted with inner and outer electrodes at its closed end. The inner electrode is exposed to the flue gas entering the open end of the cell; the outer electrode is supplied with air from a pump or regulator and is therefore exposed to a constant partial pressure of oxygen. Since zirconia is an electrolyte which conducts only oxygen ions at temperatures in excess of 600 F, the voltage generated between electrodes (i.e. the cell output) is a function of the ratio of the oxygen partial pressure on the inner electrode and its temperature. Therefore, any change in the oxygen partial pressure of the flue gas at the exposed electrode produces a change in the cell output voltage as dictated by the Nernst equation.
1. Specifications: Can process all kinds of sintering crucibles, machining crucibles and tubes according to the request of customers. Diameter(mm) Height(mm) Wall Thickness(mm) 6-10 �1.3 >150-270 �2.5 >200-300 �2.5 >10-15 �2.0 >270-380 �3.0 >300 �3.0 >15-20 �2.5 >380 �3.5 >300 �3.0 >20 �3.0 2. Surface Treatment: Annealed State, Electrolytic Polish 3. Application: Mainly used in metallurgical industry, machinery processing, glass and ceramic industries, as containers for coating materials. Because of molybdenum and molybdenum alloy material with high temperature, low pollution features, molybdenum crucible is widely used as LED industry ruby and sapphire crystal growth, rare earth smelting in the field of such as special high temperature resistant containers. 4. Advantage of our Mo crucible - uniform grain with densified microstructure ensures longer use time. - High special strength, high melting point - Excellent corrosive resistance, good thermal resistance. - Professional after-sales service
Anode butts are the residual electrode left in the electrode holder at the end of electrolysis with prebaked carbon anodes. The anode carbon is being consumed by ohmic resistive heat and electrolytic oxidation. However the part of anode just above the melt is being continuously subjected to high temperature reactions with fluoride melt and atmospheric oxidation, which ultimately results in impurities left in the discarded anode butts.At the end of their use, the left over part of the anode (called butts) are crushed and recycled to produce new anodes. However, while recycling the butts the built-up of sodium concentration is closely checked and controlled in order to avoid harmful effect of excess sodium in newly formed anodes. Good quality anodes should be oxidation resistant in gaseous environment in order to minimize oxidation on the expose surface (C + O2 2CO) [19] Price of Product (USD) : 300 Product Origin : MERCO W.L.L BAHRAIN
Product description Current Transformer Analyzer is new product created after widely adopt customers advices and deep theoretical study. It is based on the automatic FA Series Transformer Tester General which is produced by our company that is widely acclaimed and applied. The adoption of high-performance DSP and ARM, advanced manufacturing technology ensure a stable and reliable product performance, full-featured, high degree of automation, high efficiency, in the domestic leading level, they are the professional testing equipments for transformer check in power industry. Technical Parameter CTA-1000 Usage CT PT Output Voltage measurement accuracy CT Ratio Range 1~40000 accuracy PT Ratio Range 1~40000 accuracy Phase Range accuracy 0.5min DC resistance Range 0~300 accuracy Burden Range 0~1000VA accuracy Power supply Environmental Conditions Weight and Dimensions
Chlorine Analyzer of DPD Colorimetric Method PACON 2500 chlorine analyzer, is a measurement instrument of accurate, cost-effective and low maintenance, Can be on-line continuous monitoring of residual chlorine. PACON 2500 uses DPD colorimetric method to detect residual chlorine of the concentration, the automatic addition of reagent colorimetric measurement, suitable for chlorine disinfection process in the residual chlorine measurement and monitoring of Residual Chlorine Concentration in Drinking Water. Application Chlorine concentration monitoring of tap water and drinking water pipelines Chlorination disinfection of wastewater and industrial cooling water the water Features ! Analyzer DPD colorimetric method, the measurement is more accurate and stable - See American Standard Methods - GB method, consistent with the laboratory method Automatic diagnosis and automatic calibration - Automated continuous self-diagnosis monitoring - Built-in calibration curve, calibration is very simple Low reagent consumption, easy to replace - Each reagent can measure 4000 times - Reagent replacement is simple, simply pour the DPD powder into the indicator solution and dissolve it for use Automatic and manual measurement mode - Automatic measurement cycle optional: 300-3600s - A key (down arrow) to quickly start a measurement IP65 degree of protection -Indoor wall installation. Rs485 output -Standard Modbus RTU communication protocol. The baud rate is fixed at 9600. Password protection to prevent unauthorized operations -Password: 0022, English and Chinese menu.
Virucidal Sanitizer Spray M.C. (Morningcalm) V Zero M.C. V Zero components Registered with U.S. FDA Virus Removal Effect 99.99% Sanitizing Effect 99.99% Excellent Deodorizing Effect 99.99% No Noxious Chemical M.C. V Zero does not contain any chemical compounds harmful to the human body, such as ethanol or alcohol. In the process of making the undiluted solution, It turn the purified distillate into chlorine dioxide (ClO2) made from electrolytic electrolyte. 1. PH concentration level is set to at 11.4. 2. The sterilizing and deodorizing effect of pure chlorine dioxide (ClO2) is exceedingly stronger than ethanol and� rox. 3. Chlorine dioxide (ClO2) is an oxygen-based sterilizing product recognized as a WHO food additive. 4. Chlorine dioxide (ClO2) is second only to ozone among existing sterilizers, capable of killing 660 species of virus up to 99.99%. 5. Chlorine dioxide (ClO2) is harmless to the human body. It is also� an eco-friendly product used for cleaning vegetables and fruits. 6. Disinfection using chlorine dioxide (ClO2) will last for more than 24 hours once sprayed. 7. Chlorine dioxide (ClO2) is very economical as its sterilizing effect is high against viruses even when only a small amount is sprayed. *M.C. V Zero unit price 100 ml: FOB Korea quote for request 300 ml: FOB Korea quote for request 500 ml: FOB Korea quote for request 1 gallon (an undiluted solution at 100:1 ratio): FOB Korea quote for request 2 gallon (an undiluted solution at 100:1 ratio): FOB Korea quote for request *Delivery time: L/C - By air: within 1 week, By ship: within 3 weeks T/T - By air: within 1 week after receipt of T/T in advance (negotiable), By ship: within 3 weeks after receipt of T/T in advance (negotiable) *Payment term: L/C, T/T *Minimum order quantity: 5,000 ea
Product Name: Fine Aluminum Hydroxide Product Type: PF-1 Product Properties: PF-1 product has low electrolyte content, narrow particle-size distribution, low oil absorption, high whiteness (low impurities and organics, the invention patent owned by Pengfeng, One Producing Method of High Whiteness Aluminum Hydroxide Filler-Patent code: ZL 2013 1 0162126.4), high extrusion speed. As functional filler PF-1 can be used to enhance your product flame retardancy and smoke suppression function. PF-1 mainly used in wire and cable, fiber optical cable and other fields. Typical Analysis: Al(OH)3-content [%] 99.6 SiO2 [%] 0.02 Fe2O3 [%] 0.02 Na2O(total) [%] 0.30 Na2O(soluble) [%] 0.01 Free moisture [%] 0.30 Particle size (Laser diffraction) D50(μm) 1.0-2.0 Bulk density kg/m3 300-350 Oil absorption ml/100g 28 Whiteness (Elrepho 457nm) [%] 97 Electrical conductivity μs/cm 60 Refractive index 1.58 Mohs hardness 3 Applications: Wire and Cable Rubber Application Thermoplastic Material Thermosetting Material Coating, industrial paper Other area
We are leading manufacturers of UPS Batteries. Product Range:- Battery TypeCapacity in AH at 27 CDimension (In millimeters)+3 mmApprox Weight Kg+5% C20C10LengthWidthHeight*I DryFilled MTU 150 TT15012051019441034.261.20 MTU 160 TT16013051019441037.062.80 MTU 200 TT20016051019441045.6072.0 MTU 150 JT15012051022029335.6048.4 MTU 170 JT1701351022029342.6055.4 MTU 200 JT22017551827429351.070.0 Recharging Instruction: Charge at limit current of 15% of C 10 up to 13.8 V Current reduced to 300-500 mA and adjust voltage between 13.2 to 13.5 Installation Guide: Wooden or Plastic (Non-conductive) planks should be used for placing the battery For 24 V requirement, 2 batteries may be connected in series Higher Current Requirement series-Parallel connection maybe used Features: Proven Tubular Technology Electrolyte level indicator with in-built Ceramic vent plug High acid volume per ampere hour Advantages: Active material retained within the bags-Longer life Low Maintenance of battery-Topping up Suitable for use in areas of frequent power cut
Product description Current Transformer Analyzer is new product created after widely adopt customers advices and deep theoretical study. It is based on the automatic FA Series Transformer Tester General which is produced by our company that is widely acclaimed and applied. The adoption of high-performance DSP and ARM, advanced manufacturing technology ensure a stable and reliable product performance, full-featured, high degree of automation, high efficiency, in the domestic leading level, they are the professional testing equipments for transformer check in power industry. Technical Parameter CTA-1000 Usage CT PT Output 0~180Vrms12Arms36Apeak value Voltage measurement accuracy 0.1% CT Ratio Range 1~40000 accuracy 0.05% PT Ratio Range 1~40000 accuracy 0.05% Phase Range 2min accuracy 0.5min DC resistance Range 0~300 accuracy 0.2%2m Burden Range 0~1000VA accuracy 0.2%0.02VA 0.2%0.02VA Power supply AC220V 10%50Hz Environmental Conditions Operating temperature -10C~50C Humidity 90% Weight and Dimensions Dimensions 365 mm290 mm153mm,Weight
Principle : Polarization interference Specifications : Viewing field: 200* 200 mm Overall size: 300*335*330 mm Main voltage:220 V AC Measuring space height : 234.5 mm Light source: LED ( White and Sodium light) Gross Weight : 10KG Packed in 1 carton : 45*45*32cm Application area This Polariscope is designed to observe and analyze the distribution of internal strain in transparent plastic preforms. It has been widely used in the quality control of various plastic rough processing products and finished bottles. Features 1.Defects invisible to the naked eyes such as crystallization or other common defects become visible ; 2.When the plastic preform is placed on the Polarizer at a 45 angle, the colored birefringent stripes at the edge of the preform can be observed; 3.When the plastic preform is placed on the polarizer at a 0 or 90 angle, black birefringence stripes in the central part of the preform will be displayed; 4. In addition to white light, Sodium light is also used to test colored preforms or finished bottles; 5. Besides , this Strain Viewer provides 12 kinds of defect analysis functions. 12 kinds of colored defect comparison pictures will be attached to instruct related improvements in preform production process.
Product description Current Transformer Analyzer is new product created after widely adopt customers advices and deep theoretical study. It is based on the automatic FA Series Transformer Tester General which is produced by our company that is widely acclaimed and applied. The adoption of high-performance DSP and ARM, advanced manufacturing technology ensure a stable and reliable product performance, full-featured, high degree of automation, high efficiency, in the domestic leading level, they are the professional testing equipments for transformer check in power industry. Technical Parameter CTA-1000 Usage CT PT Output 0~180Vrms 12Arms 36A peak value Voltage measurement accuracy ±0.1% CT Ratio Range 1~40000 accuracy ±0.05% PT Ratio Range 1~40000 accuracy ±0.05% Phase Range ±2min accuracy 0.5min DC resistance Range 0~300 accuracy 0.2%±2m Burden Range 0~1000VA accuracy 0.2%±0.02VA 0.2%±0.02VA Power supply AC220V ±10% 50Hz Environmental Conditions Operating temperature : -10 C~50 C Humidity : 90% Weight and Dimensions Dimensions: 365 mm 290 mm 153mm,Weight
Specifications : Viewing field: 200* 200 mm Overall size: 300*335*330 mm Main voltage:220 V AC Measuring space height : 234.5 mm Light source: LED ( White and Sodium light) Gross Weight : 10KG Packed in 1 carton : 45*45*32cm Application area This Polariscope is designed to observe and analyze the distribution of internal strain in transparent plastic preforms. It has been widely used in the quality control of various plastic rough processing products and finished bottles. Features 1.Defects invisible to the naked eyes such as crystallization or other common defects become visible ; 2.When the plastic preform is placed on the Polarizer at a 0�° , the colored birefringent stripes at the edge of the preform can be observed; 3.When the plastic preform is placed on the polarizer at 45�° , black birefringence stripes in the central part of the preform will be displayed; 4. In addition to white light, Sodium light is also used to test colored preforms or finished bottles;
This Polariscope ( Ref.PSV-801) is designed to observe and analyze the distribution of internal strain in transparent plastic preforms. It has been widely used in the quality control of various plastic rough processing products and finished bottles. Specifications : Viewing field: 200* 200 mm Overall size: 300*335*330 mm Main voltage:220 V AC Measuring space height : 234.5 mm Light source: LED ( White and Sodium light) Gross Weight : 10KG Packed in 1 carton : 45*45*32cm Features 1.Defects invisible to the naked eyes such as crystallization or other common defects become visible ; 2.When the plastic preform is placed on the Polarizer at a 45 angle, the colored birefringent stripes at the edge of the preform can be observed; 3.When the plastic preform is placed on the polarizer at a 0 or 90 angle, black birefringence stripes in the central part of the preform will be displayed; 4. In addition to white light, Sodium light is also used to test colored preforms or finished bottles; 5. Besides , this Strain Viewer provides 12 kinds of defect analysis functions. 12 kinds of colored defect comparison pictures will be attached to instruct related improvements in preform production process.
Product Detail H62 brass is an ordinary brass with an average copper content of 62%. It has good mechanical properties, good plasticity in hot state and cold state, good machinability, easy brazing and welding, corrosion resistance, but easy to produce corrosion cracking. In addition, the price is cheap, and it is an ordinary brass variety widely used. H62 (i.e. four or six brass). At room temperature β Compare α The phase is much harder, so it can be used for parts bearing large loads. α+β Two phase brass can be hot worked above 600 â??. α+β Microstructure of two-phase brass: α It is a bright white solid solution, β It is an ordered solid solution based on CuZn. The inhibition effect of strong electric field on the spatiotemporal cavity of H62 brass during high temperature deformation. chemical composition Copper (Cu): 60.5 ~ 63.5% Iron (FE): ≤ 0.15% Lead (PB): ≤ 0.08% Antimony (sb): ≤ 0.005% Bismuth (BI): ≤ 0.002% Phosphorus (P): ≤ 0.01% Zinc (Zn): surplus Total impurities: ≤ 0.5% Application: it can be used as various stressed parts made by deep stretching and bending, such as pins, rivets, washers, nuts, conduits, barometer springs, screens, radiator parts, etc. Mechanical properties: Tensile strength: ≥ 315 Elongation: ≥ 30 Note: tensile mechanical properties at room temperature of other wires except those for lock and clock making Heat treatment specification: Hot working temperature 650 ~ 850 Annealing temperature 600 ~ 700 The low-temperature annealing temperature for eliminating internal stress is 270 ~ 300 Specifications and dimensions can be customized according to your requirements.
The PVC battery separator was developed for the first time in India under the brand name Microtex with their own know how and with indigenously designed machinery 41 years ago. The plant and machinery comprise sintering machines and other electrical installations, with own captive power generators, for the smooth and automatic production of over a hundred million separators per annual, the largest and most renowned manufacturers of PVC separators in India. PVC battery separators are micro porous diaphragms placed between the negative and positive plates of lead acid batteries to prevent any contact between them to avoid internal short circuit but at the same time allow free circulation of the electrolyte. Microtex PVC separator are uniform in quality, free from holes, broken corners, splits, embedded foreign material, surface rupture, physical defects, etc Characteristics: Microtex PVC separators have a very low electrical resistance which reduces internal loss saving on electric energy and improving battery performance. Their high porosity ensures easy diffusion of electrolyte and movement of ions guaranteeing battery performance even at high discharge rates. Being completely non reactive to acids, active metals and emitted gases, Microtex PVC separators enhance the active life of the battery. PVC separators surpass IS specifications IS 6071:1986 and have been tested and certified by the Central Electro Chemical Research Institute, CSIR, Chennai to be within IS specifications Microtex PVC separators are manufactured in both standard and custom sizes for automotive and industrial battery application. Every separator produced is visually inspected before being packed. Physical and chemical testing is done batch wise at CECRI CSIR, Chennai. Routine checks made at key stages along the manufacturing process maintain Microtex separators' constant high quality Microtex separators, combining the outstanding characteristics of low electric resistance, chemical cleanliness, higher porosity, Low pore size, superior corrosive resistance and with a minimum level of oxidizable organics, make themselves extremely usable for automobile, traction, stationary, train lighting and all other lead acid batteries. Microtex separators have proven themselves over 41 years of use. Four decades of experience and modern production methods and facilities have made Microtex the leading battery separator supplier in India. The key to their leading position in the separator industry is technological innovation, quality, and service. Product Range:- Height (mm) Width (mm) Thickness (mm) 136 148 1.65 136 148 1.1 140 147 1.6 84 76 1.65 145 115 1.4 300 148 1.65 270 148 1.65
Physical method, no pollution, short process flow; Recover all components of electrolyte, seperator and electrode materials with high recovery rate; It can handle both lithium iron phosphate batteries and ternary lithium batteries; The profit is good. 1. The definition of Cascade utilization: It is the process of screening the decommissioned batteries from the electric vehicles and sorting them into groups then applying them for other places. 2. Price of the cascade utilization: About 30% to 50% of the new batteries' original cost which has a price advantage. 3. Related laws and regulations The Chinese government advocates the cascade utilization of power batteries, and the companies using the cascade utilization should be responsible for the safet risks. 4. Application markets (1) Energy storage field; (2) Electric bicycles; (3) Other fields that replace lead-acid batteries. China new energy products account for more than 50% of the world total amount. Central South University is a renowned university in China, and over 60% of China's new energy companies have close relationships with Central South University. Professor Li Jian of Central South University is a well-known expert in the field of new energy in China. The "Zhengyuan Institute for Energy Storage Materials and Devices " with Professor Li Jian as the key person which has 8 professors, more than 50 post-doctoral, doctoral, and master researchers, and published more than 300 science and technology papers; over 120 patents have been declared and more than 70 authorized.
Product Name: Fine Aluminum Hydroxide Product Type: H-WF-1 Product Properties: H-WF-1 product has low electrolyte content, narrow particle-size distribution, low oil absorption, high whiteness (low impurities and organics, the invention patent owned by Pengfeng, One Producing Method of High Whiteness Aluminum Hydroxide Filler-Patent code: ZL 2013 1 0162126.4), high extrusion speed. As functional filler H-WF-1 can be used to enhance your product flame retardancy and smoke suppression function. H-WF-1 mainly used in wire and cable, fiber optical cable and other fields. Typical Analysis: Al(OH)3-content [%] 99.6 SiO2 [%] 0.02 Fe2O3 [%] 0.02 Na2O(total) [%] 0.30 Na2O(soluble) [%] 0.01 Loss on ignition [%] 34.5±0.5 Free moisture [%] 0.30 Particle size (Laser diffraction) D50(μm) 1.0-2.0 Bulk density kg/m3 300-350 Oil absorption ml/100g 28 Whiteness (Elrepho 457nm) [%] 97 Electrical conductivity μs/cm 60 Refractive index 1.58 Mohs hardness 3 Applications: Wire and Cable Rubber Application Thermoplastic Material Thermosetting Material Coating, industrial paper Other area Disclaim: Information presented here is believed to be accurate and reliable but is not intended to meet any specification and does not imply any guarantee or warranty. All data listed here are reference values and subject to production tolerances. These values are only for the product description and no guarantee is placed on the properties. It remains the responsibility of the users to test the suitability of the product for their application.
Description Used Niton XL2 XRF Analyzer Weight : < 3 lbs 10.7 oz (1.66 kg) Dimensions : 10.25 x 11 x 4 in. (256 x 275 x 100 mm) Tube : Ag anode 45 kV maximum, 80 �¼A maximum Detector : High-performance semiconductor System Electronics : 400 MHz ARM 11 CPU, 300 MHz dedicated DSP, 80 MHz ASICS DSP for signal processing, 4096 channel MCA ,64 MB internal system memory/ 128MB internal user storage. Display : Fixed angle, color, touch-screen display Standard : Analytical Range 22 elements including all precious metals Data Storage : Internal >10,000 readings with spectra Data Transfer : USB, Bluetoothâ?¢, and RS-232 serial communication Security : Password-protected user security Mode : Precious Metals Data Entry : Touch-screen keyboard, User-programmable pick lists, Optional wireless remote barcode reader Standard Accessories and Features : Locking shielded carrying case Shielded belt holster One 6-cell lithium-ion battery pack 110/220 VAC battery charger/ AC adaptor PC connection cables (USB and RS-232) Niton Data Transfer (NDTâ?¢) PC software Safety lanyard Mobile test stand Optional Features and Accessories : Thermo Scientific portable test stand Additional battery pack Wireless portable printer Barcode scanner Licensing/Registration : Varies by region. Contact your local distributor Compliance : CE, RoHS
Products details About us We are the supplier for industrial automation spare parts.We specialize in PLC module, DCS card pieces, ESD system card pieces, vibration monitoring system card pieces, steam turbine control system module, gas generator spare parts, we have established the relationship with famous PLC DCS product maintenance service providers in the world. Our Advantage 1. Professional Service:  With the help of professional Technology team,  we provide the best sales and maintenance as well as the long-term warranty. 2. Sufficient Inventory: We have a large stock. Other models UFC721AE101 3BHB002916R0101 UFC721BE101 3BHE021889R0101 UFC719AE01 3BHB003041R0001 UBC717AE01 HIEE300927R0001 UBC717BE101 3BHE021887R0101 KUC720AE01 3BHB003431R0001(3BHB000652R0001) UFC718AE01 HIEE300936R0001 PPC380AE01 HIEE300885R0001 XVC722AE02 3BHB002751R0102 3BHB002751R0102 Other brands 3500/3300 Surveillance protection system, current sensor probe EPRO PR6422/PR6423/PR6424/PR6426 eddy-current transducer,PR9268series Electrodynamic absolute vibration sensor MMS6000 system Rockwell Allen-Bradley SLC500: 1747/1746 series MicroLogix: 1761/1763/1762/1766/1764 series CompactLogix: 1769/1768 series Logix5000: 1756/1789/1794/1760/1788 series PLC-5: 1771/1785 series GE IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module , Communication module , Analog digital module EX2100, EX2000 Excitation system card , IS200 series DS200 series Invensys Foxboro I/A Series system,FBM(input / output modules) sequential control,Ladder logic control, Accident recall processing,Digital-to-analog conversion,Input / output signal processing,Data communication and processing , Experion LS, Experion PKS, Experion HS, Plant Scape. TDC 2000, TDC3000, TPS, security system ABB AC800M series module,Industrial robots spare parts DSQC series , Bailey INFI 90,800xA, Advant OCS with Master Software, with MOD 300 software Advant OCS,Freelance - Distributed Control System for Process Industry, Symphony Melody, Satt OCS, Symphony DCI System Six, Harmony/INFI 90,Security system Emerson DeltaV system Dual - channel redundant security system Redundant controller Power supply module I/O unit Analog AI modules Analog AO module
Products details About us We are the supplier for industrial automation spare parts.We specialize in PLC module, DCS card pieces, ESD system card pieces, vibration monitoring system card pieces, steam turbine control system module, gas generator spare parts, we have established the relationship with famous PLC DCS product maintenance service providers in the world. Our Advantage 1. Professional Service: With the help of professional Technology team, we provide the best sales and maintenance as well as the long-term warranty. 2.Sufficient Inventory: We have a large stock. 3. Superior Marketing foresight: Follow the Network development with the professional Global Marketing Analysis, we open Real Store and online shop together to offer clients best products and competitive price in short time. Other models UFC721AE101 3BHB002916R0101 UFC721BE101 3BHE021889R0101 UFC719AE01 3BHB003041R0001 UBC717AE01 HIEE300927R0001 UBC717BE101 3BHE021887R0101 KUC720AE01 3BHB003431R0001(3BHB000652R0001) UFC718AE01 HIEE300936R0001 PPC380AE01 HIEE300885R0001 XVC722AE02 3BHB002751R0102 3BHB002751R0102 3500/3300 Surveillance protection system, current sensor probe EPRO PR6422/PR6423/PR6424/PR6426 eddy-current transducer,PR9268series Electrodynamic absolute vibration sensor MMS6000 system Rockwell Allen-Bradley SLC500: 1747/1746 series MicroLogix: 1761/1763/1762/1766/1764 series CompactLogix: 1769/1768 series Logix5000: 1756/1789/1794/1760/1788 series PLC-5: 1771/1785 series Schneider Modicon Quantum 140series:CPU processor module,Communication module,Analog input output module,Digital input output module GE IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module , Communication module , Analog digital module EX2100, EX2000 Excitation system card , IS200 series DS200 series Invensys Foxboro I/A Series system,FBM(input / output modules) sequential control,Ladder logic control, Accident recall processing,Digital-to-analog conversion,Input / output signal processing,Data communication and processing Honeywell Alconet, Experion LS, Experion PKS, Experion HS, Plant Scape. TDC 2000, TDC3000, TPS, security system ABB AC800M series module,Industrial robots spare parts DSQC series , Bailey INFI 90,800xA, Advant OCS with Master Software, with MOD 300 software Advant OCS,Freelance - Distributed Control System for Process Industry, Symphony Melody, Satt OCS, Symphony DCI System Six, Harmony/INFI 90,Security system Emerson DeltaV system Dual - channel redundant security system Redundant controller Power supply module I/O unit Analog AI modules Analog AO module yokogawa CS3000 system CPU control module,Analog module
