Folic Acid(Cas:59 30 3) Suppliers and Manufacturers

Phosphoric acid is in Colorless, transparent and syrupy liquid or rhombic crystalline; Phosphoric acid is odorless and tastes very sour; its melting point is 42.35 C and when heated to 300 C Phosphoric acid will become into meta Phosphoric Acid; its relative density is 1.834 g/cm3; phosphoric acid is easily soluble in water and resolves in ethanol; Phosphoric acid may irritate human skin to cause phlogosis and destroy the issue of human body;Phosphoric acid shows corrosiveness being heated in ceramic vessels; Phosphoric acid has got hydroscopicity. Application 1,Phosphoric acid is used in production of phosphate industry, electroplating and chemical polishing processes, activated carbon treatment agent in industrial field, as well as cleaning agent, enhancer acidulant, nutrient of yeast, produce food grade phosphates in food industry. 2,It can be used as sour agent and nutritional agent of yeast. It can be used as sour agent for sauce, can and soft drinks. Used in the yeast Saccharomyces source of keeping nutrition and prevent bacteria breeding in vintage industry. 3,Used food acidulant; yeast nutrient; in manufacturing phosphate salts.

Pale yellow liquid at room temperature characteristic odor and taste or nearly odorless, free from rancidity or any objectionable odor and taste. Each batch of materials shall undergo strict sampling,inspection and screening for guaranteeing the affluent oil production and the excellent oil fragrance. Groundnut OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 82 - 110 Colour Lovibond 5 1/4 " Red max 2,5 Colour Lovibond 5 1/4 " Yellow max 25 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 6 - 14 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 5 C 18:1 ( Oleic Acid ) 35 - 72 C 18:2 ( Linoleic Acid ) 13 - 44 C 18:3 ( Linolenic Acid )

Phosphoric Acid Molecular Formula : H 3 PO 4 Molecular Weight : 97.99 Specification : Industry Grade GB2091 1992 or according to customer's demand Food Grade GB3149 2004 FCC or according to customer's demand Usage : Used as cleaner for printed circuit , acidic flavoring for food, nutriment for yeast, also for use of producing different phosphates. Package: 20L, 200L plastic drums, iron + plastic drums, tanks or according to customer's demand.

We are supplier of Yellow Corn. Yellow corn grade 2, GMO Test weight - min. 70 kgs per hl Foreign matter - max. 3% Moisture - max. 13% Other grains - max. 2% Broken - max. 3% Damaged - max. 3% Aflatoxin - max. 20 ppb Admixture - max. 2% Fresh Crop We Have Yellow Corn From Brazil, Ukraine, Argentina And USA. Quantity Depend on buyer request. Payment term, SBLC, LC AT sight and 30/70/ ICPO AND BCL

This mask pack contains 15% Centella Asiatica to help soothe the skin comfortably. Containing green tea extract, mugwort extract, and 3 types of hyaluronic acid, it provides moisture to the skin from deep within. - Thin Tencel sheet - Deep hydration - Moisture barrier

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

We Supply Vary kind of Tropical wood species Meranti - Bangkirai - Merbau - Rubberwood - Mahogany - Pine - Kapur - Acacia - Albasia S4S Planner Plank - E2E Panels , 3 Layers laminated - Finger Jointed - KD , Fumigated MOQ 22 cbm in 20ft Payment only by 30% Deposit term - No LC accepted to avoid complicated Banking procedure and high L/C cost

Botanical Name Keywords1 : Indian frankincense Keywords 2 : Boswellia serrata Keywords 3 : boswellic acid Type : Herbal Extract Extraction Type : Solvent Color : Light yellow fine powder MOQ : 100 kg processing time : 1 week-2 week port: Mumbai place of origin: India packaging : 25 kg HDPE payment options : Negotiable

Botanical Name Keywords1 : Gymnema sylvestre Keywords 2 : Gymnemic Acid Keywords 3 : Healthy Diabetic Support Type : Herbal Extract Extraction Type : Solvent Color : Brown Fine Powder MOQ : 100 kg processing time : 1 week-2 week port: Mumbai place of origin: India packaging : 25 kg HDPE payment options : Negotiable

Botanical Name Keywords1 : Ocimum tenuiflorum Keywords 2 : tulsi Keywords 3 : Ursolic Acid Type : Herbal Extract Extraction Type : Solvent Color : brown MOQ : 100 kg processing time : 1 week-2 week port: Mumbai place of origin: India packaging : 25 kg HDPE payment options : Negotiable

Botanical Name Keywords1 : Glycyrrhiza glabra Keywords 2 : Glabridin powder Keywords 3 : Glycyrrhizinic Acid,Digestive Aid Type : Herbal Extract Extraction Type : Solvent Color : Brown Yellow Powder MOQ : 100 kg processing time : 1 week-2 week port: Mumbai place of origin: India packaging : 25 kg HDPE payment options : Negotiable

Botanical Name Keywords1 : American Dwarf Palm Tree Keywords 2 : Serenoa repens Keywords 3 : Fatty Acids,Prostate Care,Serenoa Repens Type : Herbal Extract Extraction Type : Solvent Color : White Fine Powder MOQ : 100 kg processing time : 1 week-2 week port: Mumbai place of origin: India packaging : 25 kg HDPE payment options : Negotiable

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Acetylated starch, E1420 in the E number scheme of food additives, is a modified starch. These are not absorbed intact by the gut, but are significantly hydrolysed by intestinal enzymes and then fermented by intestinal microbiota. E number: E1420 (additional chemicals) CAS Number: 9045-28-7 EC Number: 618-556-3

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%

Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%

We are supplier of Potassium Sulphate 100 % Water Soluble, K2O : min 50 %, Chloride : Max 1 % Use: Agriculture Fertilizer K2SO4: 92% min K2O: 50% min Chloride: (0.5+-0.2) % Ca: (1.6 +- 0.1)% Mg: (0.09 +- 0.00)% Fe: (0.05 +- 0.01)% Na: (2 +- 0.2)% Moisture: (0.2 +- 0.01) % Melting Point: 1067 Deg Celsius pH: 3+-1 Solubility in Water: Soluble Bulk Density: 1.1 gm/cm^3 Potassium Sulphate also is known as Sulphate of Potash, is 100% water soluble source of Potassium (K) and Sulphur (S), It can be used in the greenhouse, open field for vegetables, cereals, oilseeds, lawn, turf, and nurseries